Jr. QC Inspector

Anchor Hocking, LLC.; Byhalia (MS); On-site; USD 42,000 - 54,000; Full time

Job summary

Corelle Brands is seeking a Quality Inspector to perform in-process, start-up, final and first article inspections of injection molded parts. You will audit presses, verify conformance to standards, and process discrepant material following SOPs.

The role includes shift coverage involving 11pm–7:30am with overtime and possible 12-hour shifts, and collaboration with the QA team to ensure efficient operations.

Qualifications

• Must have 2+ years' experience in Quality.
• Preferably experience with working in a fast-paced assembly environment.
• Ability to regularly lift and/or move up to 10 pounds and occasionally up to 50 pounds; team lift if over 50 lbs.
• Familiar with basic quality assurance tools (e.g. calipers, micrometers).
• Must be familiar with SPC for Variable/Attribute charting.
• Must be able to read, write, speak, and understand English.
• Ability to read Engineering drawings.
• Must be able to read, write, speak, and understand English.
• Ability to read Engineering drawings

Responsibilities

• In-process inspection of injection molded parts for critical dimensions, form, fit and function per Corelle Brands Inspection Plans.
• Meet with the previous shift inspector at shift change to discuss production issues from the off-going shift.
• Audit each press to ensure product conforms to Corelle Brands standards (dimensionally, visually, packaging labeling, palletizing).
• Perform First Article Inspection of injection molded parts per First Article Inspection procedure.
• Process discrepant material per Nonconforming Product SOP.
• Complete all audit forms daily (QA Inspection Log, In-Process Visual Inspection Log, Inspection History Cards, QA Daily Information Log, Line Clearance Log).
• Re-inspect the product after disposition is completed.
• Assist in training manufacturing personnel on quality requirements as necessary.
• Perform other duties as instructed by QA supervisor to maintain efficient operation.

Skills

Quality inspection

Calipers & micrometers

SPC familiarity

Read engineering drawings

MS Office (Excel/Word/Outlook)

Education

High School Diploma / GED

Tools

Calipers

Micrometers

Job description

Shift:

11pm - 7:30am | Overtime and weekends as needed (Shift will be moving to a 12 hour shift working 7pm-7am)

Position Summary:

Perform in-process, start-up, final and first article inspection of injection molded parts per Corelle Brands Policies and Procedures.

Primary Responsibilities:

• In-process inspection of injection molded parts for critical dimensions, form, fit and function per the Corelle Brands Inspection Plans.
• Meet with the previous shift inspector (at shift change) to go over any production issues discovered from the off-going shift.
• Audit each press to ensure that the product being produced, dimensionally, visually, packaging labeling and palletizing, conform to Corelle Brands standards.
• Perform First Article Inspection of injection molded parts, per First Article Inspection procedure.
• Complete all assigned audit forms daily. The audit forms include but are not limited to: Quality Assurance Inspection Log, In-Process Visual Inspection Log, Inspection History Cards, Quality Assurance Daily Information Log and Line Clearance Log
• Re-Inspect the product afterdisposition has been completed.
• Assist in training manufacturing personnel on quality requirements, as necessary.
• Perform other duties as instructed by the Q.A. supervisor or as necessary to maintain efficient operation at Corelle Brands.

Required Qualifications:

• High School Diploma /GED
• 2+ years' experience in Quality
• Preferably experience with working in a fast-paced assembly environment.
• Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 50 pounds. If over 50 lbs., team lift is required.
• Software: Excel, Word, Outlook
• Familiar withbasic quality assurance tools (e.g. calipers, micrometers).
• Must be familiar with Statistical Process Control (SPC) for Variable/ Attribute charting.
• Must be able to read, write, speak, and understand English.
• Ability to read Engineering drawings

Shift:

11pm - 7:30am | Overtime and weekends as needed (Shift will be moving to a 12 hour shift working 7pm-7am)

Position Summary:

Perform in-process, start-up, final and first article inspection of injection molded parts per Corelle Brands Policies and Procedures.

Primary Responsibilities:

• In-process inspection of injection molded parts for critical dimensions, form, fit and function per the Corelle Brands Inspection Plans.
• Meet with the previous shift inspector (at shift change) to go over any production issues discovered from the off-going shift.
• Audit each press to ensure that the product being produced, dimensionally, visually, packaging labeling and palletizing, conform to Corelle Brands standards.
• Perform First Article Inspection of injection molded parts, per First Article Inspection procedure.
• Process discrepant Material per Nonconforming Product Standard Operating Procedure.
• Complete all assigned audit forms daily. The audit forms include but are not limited to: Quality Assurance Inspection Log, In-Process Visual Inspection Log, Inspection History Cards, Quality Assurance Daily Information Log and Line Clearance Log
• Re-Inspect the product afterdisposition has been completed.
• Assist in training manufacturing personnel on quality requirements, as necessary.
• Perform other duties as instructed by the Q.A. supervisor or as necessary to maintain efficient operation at Corelle Brands.

Required Qualifications:

• High School Diploma /GED
• 2+ years' experience in Quality
• Preferably experience with working in a fast-paced assembly environment.
• Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 50 pounds. If over 50 lbs., team lift is required.
• Software: Excel, Word, Outlook
• Familiar withbasic quality assurance tools (e.g. calipers, micrometers).
• Must be familiar with Statistical Process Control (SPC) for Variable/ Attribute charting.
• Must be able to read, write, speak, and understand English.
• Ability to read Engineering drawings

11pm - 7:30am | Overtime and weekends as needed (Shift will be moving to a 12 hour shift working 7pm-7am)