Journeyman Electrician

PIPING & EQUIPMENT

Mount Pleasant (WI)

On-site

USD 39,000 - 55,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

P&E Constructors is seeking skilled electricians for a union-contracted project in Mt. Pleasant, WI. Work will follow a 6 × 10 schedule (60 hours/week) with per diem eligibility and requirement to sign with IBEW Local 430.

Responsibilities include conduit installation, lighting, power distribution, testing, and operating aerial lifts on active construction sites. Candidates must pass drug screening and be able to work outdoors in Wisconsin winter conditions.

Qualifications

  • Experience with rigid conduit installation and bending.
  • Pass pre-employment drug screening and site orientation.
  • Willingness to work outdoors in Wisconsin winter conditions.

Responsibilities

  • Lay out, cut, thread, bend, and install rigid galvanized conduit.
  • Install fixtures, lighting, and power distribution equipment.
  • Support testing, inspections, and turnover paperwork.
  • Operate aerial lifts for elevated work.

Skills

Conduit installation
Electrical wiring
Reading blueprints

Education

Wisconsin Journeyman Electrician license

Tools

Megger testing
Aerial lifts operation

Job description

P&E Constructors is an employee-owned (ESOP) mechanical and electrical construction firm executing large capital projects with deep roots in the industrial construction sector. Since 1946, we’ve delivered fabrication and installation services with a commitment to safety, quality, reliability, and client-focused solutions.

Location: Mt. Pleasant, WI
Schedule: November 2026 through June 2027
Hours: 6 × 10-hour days (60 hrs/week)
Pay: Union scale, plus per diem of $178/day (days worked) for eligible travelers

Candidates will be required to sign with IBEW Local 430 due to Union job requirement

Responsibilities
Conduit

Lay out, cut, thread, bend, and install rigid galvanized (RGS) conduit.

  • Supports: Install strut, pipe clamps, beam clamps, threaded rod, and anchors to NEC spacing.
  • Below-grade conduit: Install below-grade conduit and stub-ups, ready for inspection before backfill.
  • Cable: Pull and terminate branch circuit and feeder cable (below 480V), including labeling and megger testing.
Lighting

Install fixtures and exit emergency lighting.

  • Power distribution: Set, feed, and terminate panelboards, dry-type transformers, and safety switches.
  • Devices: Install receptacles, GFCIs, and in-use covers, and wire unit heaters.
  • Grounding: Install grounding and bonding, including ground whips and grounding bushings.
Site security and sensor work

Install site security conduit.

  • Testing and QC: Support testing, inspections, and turnover paperwork.
  • Lifts: Operate aerial lifts (booms and scissors) for elevated work.
Requirements
  • Experience with rigid conduit installation and bending
  • Pass pre-employment drug screening and site orientation
  • Willingness to work outdoors in Wisconsin winter conditions

Must bring your own safety-toe boots and work clothing. P&E provides other PPE and specialty tools.

Work Environment & Physical Demands
  • Lift, carry, push, and pull materials or equipment weighing up to 50 pounds
  • Perform physical movements such as bending, kneeling, crouching, crawling, climbing, and balancing
  • Safely navigate active construction sites, including uneven, confined, or cluttered work areas
  • Work at elevated heights and comply with fall protection and safety requirements
  • Wear required personal protective equipment (PPE) at all times
  • Work in environments with exposure to noise, dust, temperature extremes, and other construction-related conditions
  • Interpret technical drawings and visualize three-dimensional concepts when neededMaintain sufficient vision, hearing, coordination, and awareness to safely perform job duties
  • Ability to work extended shifts, including up to 12 hours, in outdoor construction environments and varying weather conditions
  • Maintain physical stamina and strength to perform demanding job duties throughout the workday
To be Considered

Candidates Must be authorized to work in the country where the position is located.

Company Overview

P&E Constructors is an employee-owned (ESOP) mechanical and electrical construction firm executing large capital projects with deep roots in the industrial construction sector. Since 1946, we’ve delivered fabrication and installation services with a commitment to safety, quality, reliability, and client-focused solutions.

Location: Mt. Pleasant, WI
Schedule: November 2026 through June 2027
Hours: 6 × 10-hour days (60 hrs/week)
Pay: Union scale, plus per diem of $178/day (days worked) for eligible travelers

Candidates will be required to sign with IBEW Local 430 due to Union job requirement

Responsibilities
Conduit

Lay out, cut, thread, bend, and install rigid galvanized (RGS) conduit.

  • Supports: Install strut, pipe clamps, beam clamps, threaded rod, and anchors to NEC spacing.
  • Below-grade conduit: Install below-grade conduit and stub-ups, ready for inspection before backfill.
  • Cable: Pull and terminate branch circuit and feeder cable (below 480V), including labeling and megger testing.
Lighting

Install fixtures and exit emergency lighting.

  • Power distribution: Set, feed, and terminate panelboards, dry-type transformers, and safety switches.
  • Devices: Install receptacles, GFCIs, and in-use covers, and wire unit heaters.
  • Grounding: Install grounding and bonding, including ground whips and grounding bushings.
Site security and sensor work

Install site security conduit.

  • Testing and QC: Support testing, inspections, and turnover paperwork.
  • Lifts: Operate aerial lifts (booms and scissors) for elevated work.
Requirements
  • Current Wisconsin Journeyman Electrician license
  • Experience with rigid conduit installation and bending
  • Pass pre-employment drug screening and site orientation
  • Willingness to work outdoors in Wisconsin winter conditions

Must bring your own safety-toe boots and work clothing. P&E provides other PPE and specialty tools.

Work Environment & Physical Demands
  • Lift, carry, push, and pull materials or equipment weighing up to 50 pounds
  • Perform physical movements such as bending, kneeling, crouching, crawling, climbing, and balancing
  • Safely navigate active construction sites, including uneven, confined, or cluttered work areas
  • Work at elevated heights and comply with fall protection and safety requirements
  • Wear required personal protective equipment (PPE) at all times
  • Work in environments with exposure to noise, dust, temperature extremes, and other construction-related conditions
  • Interpret technical drawings and visualize three-dimensional concepts when needed
  • Maintain sufficient vision, hearing, coordination, and awareness to safely perform job duties
  • Ability to work extended shifts, including up to 12 hours, in outdoor construction environments and varying weather conditions
  • Maintain physical stamina and strength to perform demanding job duties throughout the workday
To be Considered

Candidates Must be authorized to work in the country where the position is located.

We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law.

Equal Opportunity Employer, including disabled and veterans.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Desktop Support Technician
Desktop Support Technician

P&E Constructors, LLC • Port Washington (WI)

On-site
USD 26,174 - 44,083
401(k) retirement plan
Medical, Dental, and Vision insurance
ESOP - Employee ownership
Electrical Project Manager
Electrical Project Manager

P&E Constructors, LLC • Texas

Hybrid
USD 135,000 - 177,000
Employee Ownership (ESOP)
401(k) retirement plan
Company-paid employee medical premiums
+2
Field Engineer
Field Engineer

P&E Constructors, LLC • Texas

Hybrid
USD 75,000 - 120,000
Employee Ownership (ESOP)
Company-paid employee monthly medical;
Quality Manager
Quality Manager

P&E Constructors, LLC • Port Washington (WI)

Remote
USD 100,000 - 160,000
Employee Ownership (ESOP)
Per diem
Travel allowances
Electrical Project Engineer
Electrical Project Engineer

PIPING & EQUIPMENT • Haskell (TX)

Remote
USD 75,000 - 135,000
Employee ownership (ESOP)
401(k) retirement plan
Medical, dental, vision insurance
Field Engineer
Field Engineer

P&E Constructors, LLC • Wichita (KS)

On-site
USD 70,000 - 100,000
ESOP (Employee Ownership)
401(k) retirement plan
Company-paid monthly medical premiums
+1
Quality Manager
Quality Manager

Piping & Equipment Company • Boise (ID)

On-site
USD 100,000 - 160,000
Employee Ownership (ESOP)
401(k) retirement plan
Medical, Dental, Vision insurance
Field Engineer
Field Engineer

PIPING & EQUIPMENT • Wichita (KS)

On-site
USD 70,000 - 100,000
ESOP ownership
Competitive compensation
401(k) retirement plan
+1
Electrical Project Engineer
Electrical Project Engineer

P&E Constructors, LLC • Texas

Hybrid
USD 75,000 - 135,000
Employee Ownership (ESOP)
401(k) retirement plan
Paid Time Off
+1
Quality Manager
Quality Manager

P&E Constructors, LLC • Boise (ID)

Remote
USD 100,000 - 160,000
Employee Ownership (ESOP)
401(k) retirement plan
Health insurance
+2