IPC-A-610 Quality Inspector

ZT Group Intl

Georgetown (TX)

On-site

USD 55,000 - 75,000

Full time

9 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ZT Systems, a Sanmina Company, seeks an IPC-A-610 Quality Inspector to inspect PCBAs and electronics assemblies, ensuring compliance with IPC-A-610 and customer specs. You will document defects, generate NCRs, and support root cause investigations.

The role requires 1–5 years in electronics manufacturing or quality inspection, with IPC-A-610 experience and the ability to read drawings and BOMs. On-site work with a focus on quality and continuous improvement.

Qualifications

  • 1-5 years of experience in electronics manufacturing or quality inspection.
  • IPC-A-610 Certification (Certified IPC Specialist or CIS) preferred or required.
  • High school diploma or equivalent; technical degree preferred.
  • Ability to read assembly drawings, BOMs, Gerber prints, and work instructions.
  • Familiarity with IPC-A-610, J-STD-001, and ISO 9001.
  • Strong attention to detail and ability to identify defects accurately.

Responsibilities

  • Perform visual inspection of PCB assemblies, components, and solder joints according to IPC-A-610 acceptance criteria.
  • Identify and document defects such as solder bridges, insufficient solder, lifted leads, component damage, polarity errors, and contamination.
  • Inspect through-hole, SMT, BGA, LGA, and press‑fit connector assemblies.
  • Verify component placement, orientation, marking, and workmanship requirements.
  • Review assembly documentation, drawings, work instructions, and ECNs.
  • Use inspection tools such as microscopes, magnifiers, AIO, Xray machine and measurement equipment.
  • Record inspection results and maintain quality records.
  • Generate non‑conformance reports (NCRs) and communicate findings to production and engineering teams.
  • Support root cause investigations and corrective actions for quality issues.
  • Ensure compliance with ESD handling requirements and quality procedures.
  • Assist in training operators on IPC workmanship requirements.

Skills

Attention to detail
Reading drawings & BOMs
Documentation & reporting
Basic computer skills
Quality inspection
IPC standards knowledge

Education

High school diploma or equivalent
Technical degree preferred
IPC-A-610 Certification (CIS) preferred or required

Tools

Microscopes
Magnifiers
AIO
X‑ray inspection equipment
Measurement equipment

Job description

Job Summary

The IPC-A-610 Quality Inspector is responsible for inspecting printed circuit board assemblies (PCBAs), electronic assemblies, and soldered connections to ensure compliance with IPC-A-610, customer specifications, and company quality standards. The inspector identifies defects, verifies workmanship requirements, and supports continuous improvement efforts to maintain high product quality and reliability.

What You Will Do
  • Perform visual inspection of PCB assemblies, components, and solder joints according to IPC-A-610 acceptance criteria.
  • Identify and document defects such as solder bridges, insufficient solder, lifted leads, component damage, polarity errors, and contamination.
  • Inspect through-hole, surface-mount (SMT), BGA, LGA, and press‑fit connector assemblies.
  • Verify component placement, orientation, marking, and workmanship requirements.
  • Review assembly documentation, drawings, work instructions, and engineering change notices (ECNs).
  • Use inspection tools such as microscopes, magnifiers, AIO, Xray machine and measurement equipment.
  • Record inspection results and maintain quality records in accordance with company procedures.
  • Generate non‑conformance reports (NCRs) and communicate findings to production and engineering teams.
  • Support root cause investigations and corrective actions for quality issues.
  • Ensure compliance with ESD (Electrostatic Discharge) handling requirements and quality procedures.
  • Assist in training operators on IPC workmanship requirements.
What You Bring
  • High school diploma or equivalent; technical degree preferred.
  • IPC-A-610 Certification (Certified IPC Specialist or CIS) preferred or required.
  • 1-5 years of experience in electronics manufacturing or quality inspection.
  • Knowledge of SMT, through‑hole, BGA, LGA, and mixed‑technology assemblies.
  • Ability to read assembly drawings, BOMs, Gerber prints, and work instructions.
  • Familiarity with quality standards such as IPC-A-610, J-STD-001, and ISO 9001.
  • Strong attention to detail and ability to identify defects accurately.
  • Basic computer skills for documentation and reporting.
Preferred Skills
  • Experience with AMD, server, desktop, laptop, telecommunications, aerospace, medical, or automotive electronic assemblies.
  • Familiarity with AIO and X‑ray inspection of BGA devices.
  • Understanding of rework and repair processes.
  • Knowledge of statistical process control (SPC) and root cause analysis.
Physical Requirements
  • Ability to sit or stand for extended periods.
  • Good visual acuity, including color recognition and close‑detail inspection.
  • Ability to work under microscopes for prolonged periods.
  • Ability to handle small electronic components.
Typical Performance Metrics
  • Inspection accuracy.
  • Defect detection rate.
  • First‑pass yield support.
  • Documentation accuracy.
  • Compliance with IPC workmanship standards.
  • Production throughput and on‑time inspections

ZT Systems will not provide visa sponsorship for this role. Please be aware that certain positions may require the applicant to either 1) be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or 2) be eligible to obtain an export control license or license exception from the Bureau of Industry and Science & U.S. Department of Commerce. All offers of employment will be conditional subject to the foregoing.

About ZT Systems

At ZT Systems, a Sanmina Company, you'll get to do work you are proud of alongside smart, passionate people. Every day, there are opportunities to collaborate with the best in the industry to design, build, and deliver impactful solutions to world‑class customers. Along the way, you will gain hands‑on experience in a fast‑paced environment that's challenging, rewarding, and career‑defining.

A culture built around our values we work hard and think fast. We view challenges as opportunities‑to do better, push harder, and be faster than we were the day before. When we fail, we learn from it and move on together. And when we succeed, we use the momentum to go even further. We create value with everything we do, building the foundation of today‑and transforming the future of tomorrow.

Join ZT Systems and help us build technology infrastructure that connects the world.

What We Offer

At ZT Systems, a Sanmina Company, we believe that investing in our people is key to our continued growth and innovation. When you join our team, you'll gain access to a comprehensive and inclusive benefits package designed to support your well‑being, financial security, and professional development‑both now and in the future.

Compensation & Financial Security
  • Competitive base salary
  • Performance-based annual bonus eligibility
  • 401(k) retirement savings plan
  • Tuition reimbursement for eligible education programs
Health & Wellness
  • Comprehensive medical, dental, and vision coverage with access to leading providers
  • Mental health resources and employee wellness support pr
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

IPC-A-610 Quality Inspector
IPC-A-610 Quality Inspector

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 42,000 - 64,000
Competitive base salary
Annual bonus eligibility
401(k) retirement savings plan
+2
Staff Metrology & Inspection Engineer
Staff Metrology & Inspection Engineer

ZT Group Intl • Secaucus (NJ)

On-site
USD 93,000 - 136,000
Bonus eligibility
401(k) match
Tuition reimbursement
+2
Staff Failure Analysis Engineer
Staff Failure Analysis Engineer

ZT Group Intl, Inc. dba ZT Systems • Secaucus (NJ)

On-site
USD 93,000 - 136,000
Competitive base salary
Bonus eligibility
401(k) retirement savings plan
+3
RMA PCBA Debug Technician
RMA PCBA Debug Technician

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 55,000 - 75,000
401(k) retirement savings plan
Tuition reimbursement
Health & wellness coverage
+1
Procurement Program Manager
Procurement Program Manager

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 83,000 - 110,000
Bonus
Paid time off
401(k) matching
+2
Site HPIE Manager
Site HPIE Manager

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 120,000 - 180,000
Competitive base salary
Bonus eligibility
401(k) retirement plan
+5
RMA Process Technician
RMA Process Technician

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 52,000 - 70,000
Competitive base salary
Bonus eligibility
401(k) retirement savings plan
+8
Assembler
Assembler

ZT Group Intl, Inc. dba ZT Systems • Secaucus (NJ)

On-site
USD 38,000 - 58,000
Competitive base salary
Performance-based annual bonus
401(k) retirement savings plan
+6
Test Engineering Technical Program Manager
Test Engineering Technical Program Manager

ZT Systems • Georgetown (TX)

On-site
USD 110,000 - 150,000
Competitive base salary
401(k) retirement savings plan
Tuition reimbursement for eligible教育
+7
Staff Buyer
Staff Buyer

ZT Group Intl, Inc. dba ZT Systems • Georgetown (TX)

On-site
USD 83,000 - 110,000
Bonus
Paid time off
Generous 401k match
+2