IntegrationTechnician (COPV)

Starlink

Westminster (MD)

On-site

USD 28,000 - 48,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Medical coverage
Vision coverage
Dental coverage
401(k) retirement plan
Disability insurance
Life insurance
Paid parental leave
Stock purchase plan

Job summary

SpaceX is seeking an Integration Technician (COPV) to manufacture flight-critical COPVs for Starship. You will prepare liners, wind the composite overwrap, cure assemblies, and finish parts to engineering drawings in a fast-paced flight-hardware environment.

The role is onsite at a SpaceX production facility supporting COPV manufacturing; candidates should be detail-oriented and capable of following travelers and SOPs to maintain high-quality output. Shift hours start early in the day.

Qualifications

  • High school diploma or equivalency certificate.
  • 1+ years of experience working in a manufacturing environment.

Responsibilities

  • Prepare metallic COPV liners and bond interfaces for overwrap, including grit blast, hand abrasion, and power abrasion.
  • Manufacture COPVs by filament winding composite fiber onto liners, including hoop and helical winding patterns, fiber tension, and resin application (wet winding and/or towpreg).
  • Set up, operate, and tend filament winding equipment; load liners, verify winding programs, and monitor fiber path, bandwidth, and resin wet-out during the wrap.
  • Mix, handle, and apply resins and adhesives per process specification, including pot life, mix ratio, and material traceability.
  • Cure COPV overwraps and bonded assemblies in ovens or autoclaves, including thermocouple placement and process monitoring.
  • Trim and finish composite and composite-metallic COPV assemblies to drawing requirements.
  • Assemble COPV hardware, including setup, bonding, and fastener installation at bosses, fittings, and related structure.
  • Complete basic layouts on parts and assemblies to establish reference points and verify dimensions using calipers, micrometers, precision scales, and torque wrenches.

Skills

COPV manufacturing
Filament winding
Reading drawings
Quality control
Tool handling

Education

High school diploma

Tools

Filament winding machines
CNC equipment
Ovens/Autoclaves
Calipers/Micrometers

Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

INTEGRATION TECHNICIAN (COPV)

The Starship COPV Composites Technician manufactures flight-critical composite overwrapped pressure vessels (COPVs) used to store high-pressure gases on Starship and Super Heavy. This is a hands-on production role: preparing metallic liners, filament-winding the composite overwrap, curing, and trimming, finishing, and assembling COPV hardware to engineering drawings and process specifications.

This position is onsite at a SpaceX production facility supporting Starship COPV manufacturing. The successful candidate is detail-oriented, comfortable working from travelers and work instructions, and able to produce consistent, high-quality composite work in a fast-paced flight-hardware environment.

RESPONSIBILITIES:
  • Prepare metallic COPV liners and bond interfaces for overwrap, including grit blast, hand abrasion, and power abrasion
  • Manufacture COPVs by filament winding composite fiber onto liners, including hoop and helical winding patterns, fiber tension, and resin application (wet winding and/or towpreg)
  • Set up, operate, and tend filament winding equipment; load liners, verify winding programs, and monitor fiber path, bandwidth, and resin wet-out during the wrap
  • Mix, handle, and apply resins and adhesives per process specification, including pot life, mix ratio, and material traceability
  • Cure COPV overwraps and bonded assemblies in ovens or autoclaves, including thermocouple placement and process monitoring
  • Trim and finish composite and composite-metallic COPV assemblies to drawing requirements
  • Assemble COPV hardware, including setup, bonding, and fastener installation at bosses, fittings, and related structure
  • Complete basic layouts on parts and assemblies to establish reference points and verify dimensions using calipers, micrometers, precision scales, and torque wrenches
  • Follow travelers, work instructions, and standard operating procedures; record work and nonconformances as required
  • Maintain FOD control, material traceability, and a clean, organized work area in a high-rate production environment
BASIC QUALIFICATIONS:
  • High school diploma or equivalency certificate
  • 1+ years of experience working with in a manufacturing environment
PREFERRED SKILLS AND EXPERIENCE:
  • Experience manufacturing composite overwrapped pressure vessels (COPVs) or other filament-wound pressure-critical hardware
  • Experience operating CNC or programmable filament winding machines
  • Experience controlling hoop and helical wind patterns, fiber tension, bandwidth, and resin content
  • Experience drilling, reaming, honing, and/or countersinking close-tolerance holes, and installing fasteners with the correct tool for the job (drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner, rivet gun and bucking bar, etc.)
  • Experience reading and interpreting engineering drawings, including drawing symbols, flag notes, and general notes
  • Ability to follow written and verbal instructions and to work from travelers and SOPs (standard operating procedures)
  • Experience with oven or autoclave cure cycles and thermocouple placement
  • Experience building flight hardware or other pressure-critical composite structures
  • Attention to detail and accuracy while working in a fast-paced production environment
ADDITIONAL REQUIREMENTS:
  • Standing for long periods, climbing ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position
  • Must be able to lift and carry up to 25 lbs. unassisted
  • Must be able to climb ladders and work in tight spaces around winding equipment, tooling, and vessel hardware
  • Must be able to work shift hours (6:00am-4:30pm Mon – Fri) including overtime, weekends, and holidays based on site operational needs
  • Must be able to travel up to 10% of the time
  • This role is onsite and is not eligible for remote or hybrid work
COMPENSATION AND BENEFITS:

Pay range:

Composites Technician/Level 1: $20.00 - $24.50/hour

Composites Technician/Level 2: $23.50 - $29.00/hour

Composites Technician/Level 3: $27.50 - $35.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

You will also receive access to:

  • comprehensive medical coverage
  • vision coverage
  • dental coverage
  • a 401(k) retirement plan
  • short and long-term disability insurance
  • life insurance
  • paid parental leave
  • various other discounts and perks

Additionally, you may accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.

ITAR REQUIREMENTS:
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Integrationtechnician (Copv)
Integrationtechnician (Copv)

SpaceX • Hawthorne (CA)

On-site
GBP 21,000 - 37,000
Stock options
Long-term incentives
Medical, vision, and dental
+5
Composites Technician (COPV)
Composites Technician (COPV)

Starlink • Westminster (MD)

On-site
USD 33,000 - 40,000
Stock options
Long-term incentives
Discretionary bonuses
+7
COPV Filament-Winding Technician (Flight Hardware)
COPV Filament-Winding Technician (Flight Hardware)

Frontdoor Defense • Westminster (MD)

Hybrid
USD 28,000 - 48,000
Machine Operator (COPV)
Machine Operator (COPV)

SpaceX • Westminster (MD)

On-site
USD 28,000 - 34,000
Stock options
401(k) plan
Medical, vision, dental insurance
+3
IntegrationTechnician (COPV)
IntegrationTechnician (COPV)

SpaceX • Westminster (MD)

On-site
USD 28,000 - 48,000
Stock options
Medical, dental, vision coverage
401(k) retirement plan
+1
Metal Spinning Technician (COPV)
Metal Spinning Technician (COPV)

SpaceX • Hawthorne (CA)

On-site
USD 32,000 - 52,000
Stock options
Medical, vision, and dental coverage
401(k) retirement plan
Composites Lamination Technician
Composites Lamination Technician

SpaceX • Hawthorne (CA)

On-site
USD 30,000 - 48,000
Composites Lamination Technician
Composites Lamination Technician

Starlink • Hawthorne (CA)

On-site
USD 30,000 - 48,000
Stock options and incentive programs
Medical, vision and dental coverage
401(k) retirement plan
+1
Composites Technician (COPV)
Composites Technician (COPV)

SpaceX • Westminster (MD)

On-site
USD 48,000 - 72,000
Stock options
Bonuses
Medical coverage
+7
Build Engineer, COPVS (Starship)
Build Engineer, COPVS (Starship)

SpaceX • Westminster (MD)

On-site
USD 100,000 - 140,000
Comprehensive medical, vision, dental
401(k) retirement plan
Stock purchase plan
+2