Instrumentation & Equipment Specialist II – Sunday to Wednesday – 3rd shift

Planet Pharma Group

Philadelphia (Philadelphia County)

On-site

USD 52,000 - 56,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Shift differential
On-call support

Job summary

Planet Pharma in Philadelphia seeks an Instrumentation and Equipment Specialist II to maintain, calibrate and repair cGMP manufacturing, labs and warehouse equipment. This hands-on role covers planned, preventive and corrective maintenance, root-cause analysis, and collaboration with QA and operations.

Candidates should have 5+ years in GMP settings, experience with Blue Mountain CMMS and Siemens Desigo/Insight BMS, and the ability to read P&IDs and diagrams.

Qualifications

  • 5+ years of instrumentation and equipment experience in a GMP environment.
  • Experience with Blue Mountain CMMS is required.
  • Experience with Building Management Systems (Siemens Desigo/Insight) is required.
  • Must wear cleanroom PPE (scrubs, gowning, masks, gloves).
  • Excellent oral and written communication skills required.

Responsibilities

  • Perform preventative, routine and corrective maintenance of CTU’s, process utility systems, and instruments.
  • Read and interpret P&IDs and equipment drawings.
  • Write incident/deviation reports and perform root cause analyses.
  • Support on-call duties and vendor coordination.
  • Ensure compliance with building codes and safety SOPs.

Skills

GMP experience
Calibration
Troubleshooting
Communications
Driver's license
Clean room PPE

Education

Bachelor's degree
Associates degree

Tools

Blue Mountain
Desigo/Insight
BMS

Job description

Overview

The Instrumentation and Equipment Specialist II is responsible for the maintenance, calibration and repair of equipment, utilities and systems supporting cGMP Manufacturing, Laboratories and Warehouse. Perform planned and corrective maintenance and calibration according to written instructions, diagnose issues in the field in real-time, propose corrective solutions, and complete and review related Facilities GMP documents. Ensure the safety and compliance of all applicable systems.

Shift: Sunday to Wednesday from 10pm to 8:30am

Essential Functions and Responsibilities
  • Perform preventative, routine and corrective maintenance of CTU’s, process utility systems, and manufacturing/laboratory instruments.
  • An understanding of calibration / metrology and the ability to calibrate, adjust, and maintain measuring and indicating instruments to conform to set standards is highly desirable.
  • An understanding of PLC’s, HVAC, mechanical and electrical systems, and be able to troubleshoot and repair is highly desirable.
  • Perform routine inspections of the facility, equipment and systems.
  • Monitor, investigate and respond to alarms generated from the BMS/QEMS.
  • Knowledge in the use of a wide range of standards, including temperature, relative humidity, differential pressure, CO2, flow, conductivity, resistivity, speed, time, pressure, and weight is highly desirable.
  • Support Metrology to investigate OOT events using root cause analysis, metrics, technical knowledge and historical experience to identify and remediate.
  • Ability to read and interpret engineering and architectural drawings, including floor plans, reflected ceiling plans, power plans, panel schedules, mechanical/plumbing piping diagrams, Piping & Instrumentation Diagrams (P&IDs)
  • Write incident/deviation reports as necessary, perform root cause analyses and identify corrective actions as appropriate.
  • Receive, filter and execute work order requests as necessary.
  • Ensure that any equipment repairs or maintenance activities are compliant with any applicable building codes.
  • Work with external vendors for the service and/or repair of equipment.
  • Provide “On-Call” support as needed.
  • Must adhere to core values, policies, procedures, and business ethics.
  • Comply with Safety SOPs, SDS sheets, and laboratory procedures per company policy and OSHA regulations.
  • Perform miscellaneous duties as assigned.
Required Education, Skills, and Knowledge
  • Bachelor’s degree with 5 years of experience / Associates Degree with 10 years of experience is required.
  • 5-10 years of related instrumentation and equipment experience in a GMP environment is required.
  • Experience using Computerized Maintenance Management Software (Blue Mountain) is required.
  • Experience using Building Management Systems and Environmental Monitoring Systems (Siemens Desigo or Insight) is required.
  • Must be able to wear appropriate clean room attire and all Personal Protective Equipment (PPE), i.e. scrubs, gowning coverall, masks, gloves, etc.
  • Excellent oral and written communication skills required.
  • Must have valid driver’s license
Preferred Education, Skills, and Knowledge
  • Prior experience in cell therapy manufacturing or BioPharma/Life Sciences is highly desirable.
  • Experience working under ISO/IEC 17025 and/or ANSI/NCSL Z540.3 management systems is preferred.
  • Quality mindset, familiar with 21 CFR Part 11 and standard GxP best practices and FDA regulations is preferred.

The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made upon request to enable individuals to perform essential functions. Please contact Human Resources to request an accommodation.

Physical Demands and Activities Required:
  • Must be able to wear appropriate clean room attire and all Personal Protective Equipment (PPE), i.e. scrubs, gowning coverall, masks, gloves, etc.
  • Must meet requirements for and be able to wear a half-face respirator.
  • Able to stand and/or walk 90% (and sit 10%) of a 10-hr day which may include climbing ladders or steps.
  • Able to crouch, bend, twist, reach, and perform activities with repetitive motions.
  • Must be able to lift and carry objects weighing 45 pounds.
Mental:
  • Clear and conceptual thinking ability; excellent judgment, troubleshooting, problem-solving, analysis, and discretion; ability to handle work-related stress; ability to handle multiple priorities simultaneously; and ability to meet deadline
Work Environment:
  • This position will work in both an office and a manufacturing lab setting.
  • When in the lab, must be able to work in Lab setting with various chemical/biochemical exposures, including latex and bleach.
  • Able to work in cleanroom with biohazards, human blood components, and chemicals.
  • Potential exposure to noise and equipment hazards and strong odors.

Pay $38-41/hr based on level/experience (there will be a shift differential as well)

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Instrumentation and Process Calibration Technician
Senior Instrumentation and Process Calibration Technician

Jones Lang LaSalle Incorporated • Bloomington (IN)

On-site
USD 85,000 - 110,000
Instrumentation and Process Calibration Technician
Instrumentation and Process Calibration Technician

Jones Lang LaSalle Incorporated • Bloomington (IN)

On-site
USD 52,000 - 76,000
Instrumentation/Calibration Technician II
Instrumentation/Calibration Technician II

Minaris Regenerative Medicine Co., Ltd. • Allendale (NJ)

On-site
USD 70,000 - 95,000
Calibration and Maintenance Technician
Calibration and Maintenance Technician

Pfizer • Groton (CT)

On-site
USD 41,328 - 45,460
Comprehensive Benefits Package
Short-Term Disability
Long-Term Disability
+1
Maintenance Technician
Maintenance Technician

Planet Pharma • Philadelphia

On-site
USD 65,000 - 85,000
Lead Calibration Technician M-F 6am-2:30pm
Lead Calibration Technician M-F 6am-2:30pm

Celltrion Branchburg • Branchburg Township (NJ)

On-site
USD 48,000 - 81,000
Paid time off
Medical insurance
Dental insurance
+5
Senior Technician, Manufacturing Quality - 1st Shift
Senior Technician, Manufacturing Quality - 1st Shift

PerkinElmer • Richmond (VA)

On-site
USD 33,000 - 40,000
Maintenance Technician I (1:30 pm-10 pm)
Maintenance Technician I (1:30 pm-10 pm)

americanregent • New Albany (OH)

On-site
USD 52,000 - 78,000
Chemist I (overnights)
Chemist I (overnights)

Automatic Data Processing, Inc. • Woodstock (IL)

On-site
USD 52,000 - 64,000
Shift premium 10%
Comprehensive benefits
Generous PTO
Light Industrial Technician
Light Industrial Technician

UNION AGENER • Augusta (GA)

On-site
USD 55,000 - 75,000
Benefits package
401(k) plan
Vacation benefits
+1