Instrument Fitter Journeyman

Clean Energy & Infrastructure Services; Boise (ID); On-site; USD 118,474,000 - 137,760,000; Full time

Benefits offered by this job

Competitive pay

401(k) match

ESPP

Healthcare benefits

Flexible spending

Job summary

MasTec Industrial in Boise, Idaho, seeks an Instrument Fitter Journeyman. Requires Master or Journeyman with four years’ experience and appropriate electrical licenses. You will install, calibrate, tune and maintain instrumentation and control systems in industrial facilities, following safety policies at all times.

This full‑time role offers $45 per hour, health benefits, a 401(k) match, and an ESPP. Expect a 12‑hour shift in varied environments, with PPE provided and strong emphasis on safety,

Qualifications

• Master Journeyman: four+ years in craft.
• Journeyman: four+ years in craft.
• State Journeyman Electrical License or Electrical license required.
• NCCER Industrial Electrician certification preferred.

Responsibilities

• Determine methods and materials for maintenance, repair, or construction tasks.
• Dismantle equipment to access and replace defective parts.
• Calibrate, tune, and balance control loops and instrumentation.
• Install controllers, flow meters, transmitters, and analytical instruments.
• Follow safety procedures and maintain clean, organized work area.
• Operate tools and equipment, assist with safety and site compliance.

Skills

Journeyman experience

Electrical license

Safety compliance

Hand tools

Education

State Journeyman Electrical License

NCCER Industrial Electrician certification

Tools

NCCER Industrial Electrician certification

Job description

Instrument Fitter Journeyman

Job Locations

US-ID-BOISE

Requisition ID: 2026-70401

# of Openings: 4

Candidate Search Category (Portal Searching): Fabrication

Service Line (UKG) : Name: PHX-Phoenix Industrial

Overview

Company Overview

MasTec Industrial and Phoenix Industrial have served the power industry since 1947. We support utilities, developers, and municipalities with EPC services and project development expertise. We specialize in natural gas, oil, biomass, and waste‑to‑energy projects. Our depth of experience in utility and industrial systems, including simple and combined-cycle plants and reciprocating engines.

We're committed to delivering quality, safety, and value at every project phase, from concept to operations. We invest in top talent and foster a respectful, inclusive environment where employees thrive as innovative leaders.

The MasTec Industrial operating group is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do.

MasTec, a minority‑owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments.

Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor).

Responsibilities

• Determines methods and materials needed to accomplish assigned maintenance, repair, or
• Performs lock-out and tag-out procedures to secure switch gear and deactivate equipment and checks local switch point to ensure proper lock-out procedures are used.
• Dismantles equipment or devices to gain access to and remove defective parts or components. Troubleshoots, inspects, and maintains
• Removes and replaces operating
• Calibrates equipment, tunes, and adjusts equipment to meet established tolerances.
• Installs new and used equipment such as controllers, flow meters, pressure transmitters, analytical instrumentation controls, recorders, alarm panels, PLC's, modems, and display panels, including all instrument piping, automatic transfer switch gears, ultrasonic
• Calibrates, tunes, and balances control loops and hardware routinely to ensure accuracy of operation for equipment such as recorders, flow meters, and controllers.
• Responsible for knowing and following appropriate safety procedures.
• Acquire knowledge on methods and materials needed to accomplish assigned maintenance, repair, or construction tasks.
• Perform miscellaneous tasks that require manually moving materials, tools and equipment and use of hand and power tools.
• Perform work area clean‑up and safety‑related duties.
• Acquire knowledge to install new and used equipment such as controllers, flow meters, pressure transmitters, analytical instrumentation controls, recorders as well as instrument air piping.
• Requires working in operating facilities and observing and abiding by additional safety policies and procedures.
• Other duties as assigned.

Qualifications

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

• Master Journeyman: a minimum of four years' experience in craft and hold one of the.
• Journeyman: a minimum of four years' experience in craft.
• following Licenses or certifications that reciprocate with the State of Projects location and with the project's requirements; State Journeyman Electrical License, State Electrical license, or Hold Industrial Electrician certification from NCCER by passing written exam.
• Each employee Must provide Safety Toe Boots.
• Each employee must provide Safety Toe Boots.
• Each employee is required to provide their own set of appropriate/approved hand tools and personal tools, per the Tool List, needed to preform daily tasks as required. The Company will provide all power tools and personal safety gear.
• Follow all state, company, client, OSHA, and federal guidelines regarding health and safety.
• Each employee is to practice and maintain good "House Keeping" by cleaning up their work area and jobsite after each task.

PHYSICAL DEMANDS:

• Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
• May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
• Stamina to perform this task repetitively and continuously for several hour intervals.
• Uncontrolled environmental conditions: Constant change in weather and site conditions.
• This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
• Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
• Move in and around confined, cluttered, and uneven areas.
• May need to work at heights and must be able to abide by all safety and fall‑protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
• Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
• Visualize objects in three dimensions from drawings.
• Keep good balance and work at heights.
• See well (either naturally or with correction).
• Hear well (either naturally or with correction.)
• Coordinate the use of eyes, hands, and feet.

What's in it for You

Financial Wellbeing

• Compensation $45 / hour,commensurate with experience
• Competitive pay with ongoing performance review and merit increase
• 401(k) with company match & Employee Stock Purchase Plan (ESPP)
• Flexible spending account (Healthcare & Dependent care)

Health & Wellness

• Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children
• Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount
• Discounted National Gym Membership Network
• Employee Assistance Program

Planning for the Unexpected

• Short and long-term disability, life insurance, and accidental death & dismemberment
• Voluntary life insurance, accident, critical illness, hospital indemnity coverage
• Emergency Travel Assistance Program
• Group legal plan

Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact [e-mail]. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information.

MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Service Line

PHX-Phoenix Industrial