Instrument & Electrical inspector - Taylor, TX

ACUREN -

Texas

On-site

USD 90,000 - 130,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ACUREN is seeking an Instrument & Electrical Technician II for our Taylor, TX operation. The role focuses on maintenance, calibration, and repair of electrical systems and instrumentation in an industrial setting. Travel to shop and field work across Permian Basin with safety as a priority.

You will diagnose equipment issues, interpret schematics, and support project execution with junior technicians while maintaining 98% runtime at facilities.

Qualifications

  • Requires minimum 5–10 years in instrument and electrical roles in oil & gas
  • Journeyman license preferred
  • Experience with high voltage installations and hazardous areas is desirable
  • Able to read electrical schematics and perform calibration and maintenance

Responsibilities

  • Perform inspections on materials, equipment and installations on site per codes and specs
  • Document findings using QIR app on tablet
  • Witness loop checks and tests on transformers, switchgear, and control devices
  • Troubleshoot electrical and control systems; perform calibration and maintenance
  • Coordinate with supervisors and field crews; ensure safety compliance

Skills

Oil & gas equipment
Electrical troubleshooting
Instrumentation calibration
Schematic reading
MS Office
Field troubleshooting
Team coordination

Education

Technical diploma or equivalent
Journeyman license preferred

Tools

MS Office
PLC/DCS basics
Electrical test equipment

Job description

Instrument & Electrical inspector - Taylor, TX

Posted: 11/17/2026 6:11:34 PM

NDT.org Job Number:83097* Please reference NDT.org Job Number on all correspondence

Contact: Yeni Craig

Company: ACUREN

State: TX Texas

Country: United States

Length: Full time/Nested

Pay: Based on experience and certifications

Acuren is currently recruiting for a Instrument & Elec II to support our operation in Taylor, TX. As an I&E Technician Level II, you will be responsible for the maintenance, calibration, and repair of electrical systems and instrumentation equipment in an industrial setting. This includes troubleshooting complex electrical and control systems, ensuring proper functionality of instrumentation, and adhering to safety standards. You will work on a range of equipment such as motors, transformers, PLCs, control valves, and digital/analog end devices. The Instrument & Elec II performs more complex installation, calibration, and maintenance work on instrumentation and electrical systems with limited supervision. This role is responsible for diagnosing and resolving equipment issues, interpreting electrical and control schematics, and ensuring reliability of process control systems. The I&E Technician II supports project execution, assists in training junior technicians, and maintains compliance with applicable codes and safety procedures. This intermediate position requires strong technical competence, analytical thinking, and the ability to perform independently in field and shop environments.

Responsibilities
  • Executes the specific inspections on materials, equipment and construction/installation activities on site in accordance with Company specifications and applicable Codes.
  • Write reports on supplied tablet utilizing Quality Inspection Reporting (QIR) app to document fabrication/installation progress.
  • Checks cable laying and cable identification.
  • Witness all relevant loop checks.
  • Checks power transformers, switchboard, accumulator battery, socket outlets, lighting system.
  • Performs visual inspections, witness dimensional test, checks rating and material for connection.
  • Witness tests of continuity, insulation resistance.
  • Checks installation of instruments.
  • Witness test on functional instruments.
  • Checks pneumatic signal connection.
  • Witness test communication functionalities.
  • Witness the tests, controls and inspections carried out.
  • Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls and inspections.
  • Ensure the correct implementation of the approved Inspection Test Plan.
  • Position reports to the Versa I&E Chief Inspector.
  • Travel to shop, well and pipeline installations that the client is currently developing throughout the Permian Basin.
  • Area of Operations include L48 assets for client based out of Midland/Odessa working on upstream projects.
  • Coverage areas include Midland/Odessa, South Texas, Farmington, NM, Casper, WY and North Dakota. Other areas may be incorporated later. Majority of work will be performed in a shop environment with minimal travel to the field as needed.
  • Travel is paid at GSA mileage rates for all activities from the assigned office of operation.
  • Per diem is paid at GSA rates for the area worked in.
  • Pay commiserate with experience and highly competitive for assigned area.
  • Consider SAFETY as the primary responsibility in all operations.
  • Aid Technical and Operations Supervisors in coordinating I & E maintenance activities for facility repair, installation, and modifications. Work with Operations to maintain 98% runtime at facilities.
  • Ensure installations adhere to corporate policies, procedures, applicable codes and regulations.
  • Manage technical projects at the field level and coordinate material and resources.
  • Perform installation, problem diagnosis, fault analysis and repair of computerized control systems relative to the following:
  • Metering (volumetric and mass measurement) and control devices.
  • Control systems (PLC, Relay Logic, DCS, etc.).
  • Read and draw basic electrical schematics.
  • Basic knowledge of local area network.
  • MODBUS Over I/P.
  • Component level repairs to electronics circuits.
  • Motor operated valves.
  • Medium Voltage Switch Gear and Power Handling Equipment.
  • Electronic tank gauging systems.
  • Operations computer hardware and associated equipment.
  • Supervise and/or repair electrical problems on pipeline equipment, generators, CDP’s, water injection pumps, compressor stations, LACTs.
  • Participate in Root Cause Failure Analysis, implement preventative/predictive maintenance. Ensure all safety system testing is completed and documented.
  • Other work duties as assigned.
Skills
  • Previous construction experience within the oil and gas industry.
  • Previous exposure to high voltage electrical installation including switchgear and electric drives.
  • Exposure to Hazardous Area installations.
  • Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc.
  • A working knowledge of IEC/ISO/NEC/ANSI/API/ISA/NFPA codes and standards relating to electrical and instrumentation work.
  • Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work.
  • Knowledge of safety legislation and regulations.
  • Proficient in the use of Microsoft Office. (Excel/Word)
  • Hazardous Area installation and inspection experience is an advantage.
  • Ability to perform well under pressure.
  • Thorough knowledge of pipeline systems and surface equipment, including tanks, valves, positive displacement and centrifugal pumps, electric motors, gas engines, and other pertinent equipment.
  • Strong understanding of pipeline transportation system operations.
  • Sound knowledge of PSMA, API, NEC and OSHA codes and standards with an ability to apply that knowledge to pipeline projects.
  • Strong computer skills (MS Office suite).
  • Self-motivated and able to work with little supervision.
  • Strong, team oriented interpersonal communication.
  • Supervisory, analytical and project management skills.
  • Programmable logic controller / Distributed control system (PLC/DCS) troubleshooting/programming experience preferred. Local Control Network experience.
Requirements
  • Minimum of 10 years’ experience in a comparable role.
  • Accredited one or two-year technical diploma meeting the requirements of a professional technical designation or high school diploma with a minimum of 5-10 years progressive and related experience.
  • Journeyman license preferred.
Working Conditions

Outside environment with continuous physical effort, exposure to 5-7 elements/conditions, moderate mental effort, and occasional requests for assistance. Willing and able (with reasonable accommodation) to travel 25% of the time on a yearly basis.

PHYSICAL JOB REQUIREMENTS & DEMANDS

Frequently required to stand, sit, climb, balance, stoop, crouch and crawl.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Instrument & Electrical inspector - Taylor, TX
Instrument & Electrical inspector - Taylor, TX

Acuren Inspection, Inc. • Corpus Christi (TX)

On-site
USD 70,000 - 100,000
Competitive Salary
Medical, dental, and supplemental ins.
401K Plan
+5
Technician, I & E (Bandera, TX)
Technician, I & E (Bandera, TX)

Enterprise Products • Bandera (TX)

On-site
USD 65,000 - 90,000
I&E Technician
I&E Technician

WhiteWater • Alice (TX)

On-site
USD 60,000 - 80,000
Employer matched 401(k)
Medical insurance
Dental insurance
+2
I E Technician
I E Technician

CVR Energy, Inc. • East Dubuque (IL)

On-site
USD 42,760 - 79,267
Competitive wages based on experience
Paid Time Off
401K with Company Contributions
+2
Technician, I & E (Bandera, TX)
Technician, I & E (Bandera, TX)

Enterprise Products • Bandera (TX)

On-site
USD 65,000 - 95,000
I&E Technician: Instrumentation & Electrical Pro
I&E Technician: Instrumentation & Electrical Pro

Enterprise Products • Texas

On-site
USD 80,000 - 110,000
Technician, I & E (Encinal, TX)
Technician, I & E (Encinal, TX)

Enterprise Products • Texas

On-site
USD 80,000 - 110,000
Instrument Technician
Instrument Technician

RigUp • Midland (TX)

On-site
USD 64,000 - 90,000
I&E Technician
I&E Technician

Energy Transfer • Odessa (TX)

On-site
USD 65,000 - 90,000
I&E Construction Specialist IV
I&E Construction Specialist IV

Danos • Midland (TX)

On-site
USD 90,000 - 130,000