Installation Technician

Automated Conveyor Systems

Lynchburg (VA)

On-site

USD 48,000 - 66,000

Full time

8 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Automated Conveyor Systems is hiring for a mechanically skilled installer to support the installation of material handling systems. You will drill, anchor, and secure equipment, route belts, and ensure assemblies align per drawings. The role requires reading measurements, identifying electrical and mechanical parts, and maintaining a clean, safe work area.

Travel to project sites across the U.S. and follow all safety guidelines while adhering to company procedures.

Qualifications

  • High school diploma or GED is required.
  • Able to read a tape measure to 1/16".
  • Proficient in shop math and basic electrical theory.
  • Strong mechanical aptitude and safety compliance.

Responsibilities

  • Meets attendance and time/work standards.
  • Drill holes in concrete floor, install anchors and secure equipment.
  • Route and fasten conveyor belts through roller conveyor with minimal instruction.
  • Able to remove and set conveyor rollers and keep work area clean.
  • Follow written and verbal instructions from Crew Lead or Level A Installer.
  • Perform other duties as assigned and understand basic electrical concepts.

Skills

Tape measure reading
Shop math
Electrical awareness
Mechanical aptitude
Safety compliance

Education

High school diploma or GED

Tools

Basic hand tools
Power tools
SDS rotary hammer drill
Tube bender
Voltmeter
Conduit bending tools

Job description

Brief Description

Mechanically support the installation of material handling systems. This includes but is not limited to assembling and securing the equipment.

Requirements
Duties & Responsibilities
  • Meets acceptable attendance, time/work standards
  • Keep accurate and complete expense reports on a weekly basis
  • Drill holes in concrete floor, install anchors and secure equipment
  • Route and fasten conveyor belts through roller conveyor with little instruction
  • Able to remove and set conveyor rollers
  • Keep work area clean and organized
  • Follow all workplace rules and safety guidelines
  • Follow written and verbal instructions from the Crew Lead or Level A Installer
  • Perform other duties as assigned
  • Conveyor knowledge progression (able to identify different equipment)
  • Unstack and place conveyor to zero line
  • Square conveyor
  • Install air lines based on drawings
  • Understand functions of a solenoid (in and out ports)
  • Able to identify general electrical and mechanical parts
  • Proficient in shop math
  • Obtain fork truck license
  • Understanding of basic electrical theory
  • Able to use voltmeter to measure voltage and OHMS (continuity) with guidance if needed
  • Able to run conduit and operate tube bender (basic bends: 90’s, offsets, 3-point saddles)
  • Able to make wire pulls and connections as well as install general electrical components (solenoids, photo-eyes, ect.)
  • Able to layout and install basic infeed’s and dischargers per drawings
  • Meets acceptable attendance, time/work standards
  • Keep accurate and complete expense reports on a weekly basis
  • Drill holes in concrete floor, install anchors and secure equipment
  • Route and fasten conveyor belts through roller conveyor with little instruction
  • Able to remove and set conveyor rollers
  • Keep work area clean and organized
  • Follow all workplace rules and safety guidelines
  • Follow written and verbal instructions from the Crew Lead or Level A Installer
  • Perform other duties as assigned
  • Conveyor knowledge progression (able to identify different equipment)
  • Unstack and place conveyor to zero line
  • Square conveyor
  • Install air lines based on drawings
  • Understand functions of a solenoid (in and out ports)
  • Able to identify general electrical and mechanical parts
  • Proficient in shop math
  • Obtain fork truck license
  • Understanding of basic electrical theory
  • Able to use hot stick to determine voltage presence
  • Able to use voltmeter to measure voltage and OHMS (continuity) with guidance if needed
  • Able to run conduit and operate tube bender (basic bends: 90’s, offsets, 3-point saddles)
  • Able to make wire pulls and connections as well as install general electrical components (solenoids, photo-eyes, ect.)
  • Able to layout and install basic infeed’s and dischargers per drawings
Education & Experience
  • High school diploma or GED
Technical Skills/Working Knowledge
  • Able to read a tape measure accurately to the 1/16th of an inch
  • Able to identify and use basic mechanical hand tools
  • Standard and metric open end and box wrenches
  • Adjustable wrench/adjustable pliers
  • Ratchet and sockets
  • Sledgehammer
  • Speed square/framing square
  • Tubing cutter
  • Able to identify and use basic electrical hand tools:
  • Phillips and flat head screw drivers
  • Termination/control screwdriver
  • Side cutters/dykes
  • Wire strippers
Able To Identify And Use Basic Power Tools
  • Portable band saw
  • SDS rotary hammer drill
  • Reciprocating saw/ saws all
  • Basic understanding of electrical drawings
  • Basic understanding of 3-phase circuits
  • Basic understanding of control circuits
  • Working knowledge of pneumatic systems, including installation, start up and mechanical troubleshooting
Work Environment
  • Ability to work in a fast-paced environment with changing priorities
  • Must be able to work the mandatory hours and weekends as required
  • Ability to travel on a frequent basis to project sites within the US.
  • Must be able to perform repetitive bending, lifting, working on knees and floor
  • Must be able to lift a minimum of 50lbs
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician
Maintenance Technician

Little Leaf Farms, LLC • Pennsylvania

On-site
USD 55,000 - 75,000
Field Service Supervisor
Field Service Supervisor

hrsystem • Roanoke (VA)

On-site
USD 65,000 - 90,000
Installation Technician
Installation Technician

Elliott Machine Works • Galion (OH)

On-site
USD 35,000 - 52,000
Electrical Installer
Electrical Installer

Dematic • Atlanta (GA)

On-site
USD 46,000 - 64,000
Career Development
Competitive Compensation and Benefits
Pay Transparency
+1
Maintenance Technician
Maintenance Technician

Little Leaf Farms • Manchester (TN)

On-site
USD 52,000 - 68,000
Preventative Maintenance Technician
Preventative Maintenance Technician

All Systems Electrical • Sumner (WA)

On-site
USD 52,000 - 68,000
Field Service Technician
Field Service Technician

hrsystem • Wheeling (WV)

On-site
USD 22,000 - 30,000
Field Service Technician
Field Service Technician

Hrsystem • Louisville (KY)

On-site
USD 25,000 - 33,000
Mechanical Foreman 1
Mechanical Foreman 1

STILL Sverige AB • Grand Rapids (MI)

On-site
USD 51,000 - 70,000
Career Development
Competitive Compensation and Benefits
Pay Transparency
+1
Mechanical Installer 1
Mechanical Installer 1

Dematic • United States

Remote
USD 34,000 - 64,000
Career Development
Competitive pay
Pay Transparency
+1