Inspector Structures Paint

Lockheed Martin Corporation

Marietta (GA)

Presencial

USD 60.000 - 90.000

Jornada completa

Hace 4 días
Sé de los primeros/as/es en solicitar esta vacante

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Descripción de la vacante

Lockheed Martin Corporation in Marietta, GA is seeking an Aircraft Inspector to verify workmanship and conformance across structural, electrical, and plumbing assemblies. The role covers final mating of major components, functional checks, and pre-flight readiness under the company QC Manual.

Responsibilities include inspecting wing tanks, sealing operations, and completing disposition documentation for any nonconforming items, with stamps of approval upon compliance.

Formación

  • Must have current Inspection certifications as required by Company policy and Quality Control Manual.

Responsabilidades

  • Inspect structural, electrical, and plumbing assemblies and the final mating of airplane components for conformance to requirements.
  • Inspect sealing operations on wing tanks and related installations.
  • Oversee final washing, priming, painting, and interior trimming to ensure conformance with engineering prints and process specs.
  • Check alignment, attachments, workmanship, and conformance to installation drawings for main airframe assemblies.
  • Perform compartment-by-compartment shakedown and functional tests of aircraft systems and subsystems.
  • Approve bonding and pressure testing operations and document dispositions of any nonconforming items.
  • Stamp or approve acceptable items and prepare documentation for disposition of unacceptable items.

Descripción del empleo

Standard Job Description

This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to assure that such operations are accomplished in conformance with applicable engineering prints, disposition data, and process specifications. Must have current Inspection certifications as required by Company policy and Quality Control Manual. Inspects for alignment, attachments, workmanship, completeness, and conformance to installation drawings, engineering, inspection and other specifications or requirements the final assembly and mating of airplane structural components such as outer to inner wing, power plant to wing, fore to aft fuselage sections and empennage to fuselage, and the attachment and rigging of items such as elevators, flaps, ailerons, and stabilizers. Inspects for alignment, continuity, workmanship and conformance to the required specifications, the final hookup and installation of functional units of the airplane such as electrical, rigging, power plant, armament, plumbing and hydraulic systems, including operational tests and checkouts. Conducts a full compartment by compartment shakedown of a completed airplane for completeness and accuracy of installations; alignment, freedom of movement, clearances, tension, throw limits and torque of functional systems; completeness, workmanship, attachment, and conformance to specifications of required interior, cabin, power plant, and exterior accessories, identifications, and other attachments. Inspects and approves the final operational checkout of the completed airplane under simulated flight conditions prior to transfer to flight line including check for adherence to latest design changes, and customer requirements. Inspects jig loading and mating, framing, skinning, riveting, and out-of-jig shakedown of structural assemblies, sub-assemblies, and bench assemblies for workmanship and conformance with requirements. Inspects such assemblies as fuselage and center sections, outer and inner wings, and any attached structural installations for alignment, contour, material, finish and shortages; checks rivets, bolts, screws, and fasteners for cracks, edge distance, and size. Inspects functional installations such as electrical, hydraulic, plumbing and rigging units and components for workmanship, clearance, tension, coding, finish, alignment, routing, location, and conformance with other similar requirements. Inspects and approves bonding and pressure testing operations. Inspects spot-welded parts and assemblies for workmanship, correct assembly, contour, cracks, faults, edge distance, and spots in radii. Stamps or otherwise approves acceptable items; rejects unacceptable items; prepares documentation for disposition of unacceptable items. Performs inspection of integral wing tanks and related structural installations and modification for conformance to applicable designs and specifications. Inspects the tank and installations for such factors as completeness, workmanship, freedom from foreign matter, and sealability. Inspects aircraft during and after priming and final painting operations.

Standard Job Description

This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to assure that such operations are accomplished in conformance with applicable engineering prints, disposition data, and process specifications. Must have current Inspection certifications as required by Company policy and Quality Control Manual. Inspects for alignment, attachments, workmanship, completeness, and conformance to installation drawings, engineering, inspection and other specifications or requirements the final assembly and mating of airplane structural components such as outer to inner wing, power plant to wing, fore to aft fuselage sections and empennage to fuselage, and the attachment and rigging of items such as elevators, flaps, ailerons, and stabilizers. Inspects for alignment, continuity, workmanship and conformance to the required specifications, the final hookup and installation of functional units of the airplane such as electrical, rigging, power plant, armament, plumbing and hydraulic systems, including operational tests and checkouts. Conducts a full compartment by compartment shakedown of a completed airplane for completeness and accuracy of installations; alignment, freedom of movement, clearances, tension, throw limits and torque of functional systems; completeness, workmanship, attachment, and conformance to specifications of required interior, cabin, power plant, and exterior accessories, identifications, and other attachments. Inspects and approves the final operational checkout of the completed airplane under simulated flight conditions prior to transfer to flight line including check for adherence to latest design changes, and customer requirements. Inspects jig loading and mating, framing, skinning, riveting, and out-of-jig shakedown of structural assemblies, sub-assemblies, and bench assemblies for workmanship and conformance with requirements. Inspects such assemblies as fuselage and center sections, outer and inner wings, and any attached structural installations for alignment, contour, material, finish and shortages; checks rivets, bolts, screws, and fasteners for cracks, edge distance, and size. Inspects functional installations such as electrical, hydraulic, plumbing and rigging units and components for workmanship, clearance, tension, coding, finish, alignment, routing, location, and conformance with other similar requirements. Inspects and approves bonding and pressure testing operations. Inspects spot-welded parts and assemblies for workmanship, correct assembly, contour, cracks, faults, edge distance, and spots in radii. Stamps or otherwise approves acceptable items; rejects unacceptable items; prepares documentation for disposition of unacceptable items. Performs inspection of integral wing tanks and related structural installations and modification for conformance to applicable designs and specifications. Inspects the tank and installations for such factors as completeness,

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Inspector
Inspector

Vertical Aerospace • Bristow (OK)

Presencial
USD 55.000 - 85.000
Aircraft Designated Inspector
Aircraft Designated Inspector

Summit Aviation • Town of Middletown (NY)

Presencial
USD 75.000 - 110.000
Aviation Structures Inspector: Paint & QC
Aviation Structures Inspector: Paint & QC

Lockheed Martin Corporation • Marietta (GA)

Presencial
USD 60.000 - 90.000
Aircraft Inspector
Aircraft Inspector

greenpointtechnologies • Moses Lake (WA)

Presencial
USD 70.000 - 90.000
Inspector- NSA
Inspector- NSA

North State Aviation • Winston-Salem (NC)

Presencial
USD 70.000 - 100.000
Chief Inspector
Chief Inspector

United Aero Group • Orlando (FL)

Presencial
USD 75.000 - 120.000
QC Inspector / A&P
QC Inspector / A&P

AAR Corp • Florida

Presencial
USD 65.000 - 110.000
Quality Inspector
Quality Inspector

United Aero Group • Orlando (FL)

Presencial
USD 54.000 - 76.000
Repair & Overhaul Inspector
Repair & Overhaul Inspector

Advanced Materials Technologies, Llc • Chandler (AZ)

Presencial
USD 55.000 - 75.000
CHIEF INSPECTOR
CHIEF INSPECTOR

ADP, Inc. • Miami (FL)

Presencial
USD 90.000 - 120.000