Inspector - Magnetic Penetrant And Dye Check

JOHNSON SERVICE GROUP; Nashville (TN); On-site; USD 52,000 - 76,000; Full time

Job summary

Johnson Service Group is seeking an NDT Inspector to operate magnetic, penetrant, and dye check inspection equipment on ferrous and non-ferrous parts. The role involves evaluating patterns, determining defect disposition, and recommending rework methods to salvage parts.

The position may require crane operation and handling of parts through processing stages. Candidates should have at least two years of relevant inspection equipment experience, be able to read specifications and blueprints, and

Qualifications

• Two years of operation of magnetic, penetrant and dye check inspection equipment.
• Ability to read and interpret specifications and blueprints.
• Willingness to take yearly written tests and obtain inspection certificates.

Responsibilities

• Inspect ferrous and non-ferrous parts using magnetic, penetrant, or dye check methods.
• Assess patterns and defect locations to determine acceptance, rejection or need for rework.
• Advise on rework methods and ensure parts are salvageable.
• Operate crane and handle loading/unloading of parts as part of processing.
• Maintain cleanliness and accuracy in the work area and documentation.

Skills

Magnetic testing

Penetrant inspection

Dye check inspection

Blueprints reading

Interpreting specs

Crane operation

Demagnetizing

Disposition decisions

Job description

Shift: Must be open to working different shifts. New hires are typically are assigned to a 1st shift schedule and then assigned to where the greatest need is based on seniority and availability1st, M-Th (6 am - 4:30 pm)1st, M-F (6 am - 2:30 pm)1st, F-Su (6 am - 6:30 pm)2nd, M-F (2 pm - 10:30 pm) plus a dollar an-hour differential2nd, F-Su (6 pm – 6:30 am) plus a dollar an-hour differential2nd, M-Th (4:30 – 3 am) plus a dollar an-hour differentialOccupation SummaryThis occupation requires the operation of magnetic, penetrant and dye check inspection equipment and the subsequent inspection for defects in ferrous and non-ferrous welded, forged, cast, raw and machined parts.Work PerformedInspects ferrous and non-ferrous parts in which defects have been detected or indicated by processing in magnetic testing, penetrant or dye check equipment and makes proper disposition.Visually examines iron oxide powder, penetrant oil or dye check patterns basing disposition (accepted, rejected, or rework) upon buildup, location, and course of pattern, depth and number of defects and nature of part and fabrication operations involved.Makes recommendation where defect can and should be eliminated by grinding or machining and approves rework method when parts are salvageable.Checks with proper personnel if oxide patterns reveal presence of inclusions of foreign substances.Plans and advises on method of setting up parts and operating magnetic and penetrant inspection equipment as directed.Loads parts, operates crane while processing, inspects, unloads parts and cleans and removes masking materials as necessary.Performs material hardness and conductivity inspections as directed.Determines amperage required to magnetize parts and uses demagnetizing equipment as required where specifications prohibit polarization.Checks etch rate on etch tank and runs sample part daily.Determines penetration time and emulsifier time if information is not in specifications.Determines proper sequence of dips and rinses.Determines whether parts are to be magnafluxed, penetrant inspected or dye checked and whether parts can be etched.Stamps parts, tags, shop orders, and prepares paperwork and parts as required.Must obtain a magnetic and penetrant inspection certificate and have eyes checked yearly.Performs duties incidental to the accomplishment of the assigned task.Each employee will be responsible for maintaining the cleanliness and housekeeping in his work area as directed as well as assuring the accuracy of their work.This position requires the ability to work any shift due to the union work environment and possible mandatory overtime.Minimum QualificationsNormally two (2) years operation of magnetic, penetrant and dye check inspection equipment is required.Must understand magnetic, penetrant and dye check inspection procedure and work from contract, engineering and military specifications.Must take written test yearly.Demonstrated ability to read and interpret specifications and blueprints and ability to qualify for various levels of non-destructive inspections.** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.#D500