Industrial Painter: Advanced Surface Prep & Coatings

Worley; Notrees (TX); Vor Ort; USD 40.000 - 60.000; Vollzeit

Zusammenfassung

Worley is hiring a paints specialist to maintain and protect surfaces across industrial sites in Texas. You will prepare surfaces, mix coatings, apply primers and finishes, and work with scaffolding and power tools.

Minimum 4 years industrial construction/maintenance experience is required. You’ll read work orders, estimate material needs, and prioritize safety while delivering quality finishes on challenging projects.

Qualifikationen

• Minimum 4 years industrial construction/maintenance experience.

Aufgaben

• Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting
• Select and mix coating additives to thin or promote drying and adhesion
• Fill cracks, holes, and joints with caulk, putty, plaster or other fillers, using caulking guns or putty knives
• Uses high air-pressure sandblasting equipment, chemical application, chipping hammer, power tools and other abrasives to remove rust, grease, dirt, concrete, and old paint prior to paint application
• Apply primers or sealers to prepare surfaces, such as bare wood, metal, piping, fixtures, structures and equipment for finish coats
• Apply paint, stain, varnish, enamel, and other finishes to heavy equipment, buildings, and/or other structures using brushes, spray guns, sandblasting equipment, or rollers
• Calculate amounts of required materials and estimate costs, based on surface measurements and/or work orders
• Erect scaffolding and swing gates, or set up ladders, to work above ground level
• Mix and match colors of paint, stain, or varnish with oil and thinning and drying additives in order to obtain desired colors and consistencies

Kenntnisse

Industrial construction/maintenance

Jobbeschreibung

Worley is hiring a paints specialist to maintain and protect surfaces across industrial sites in Texas. You will prepare surfaces, mix coatings, apply primers and finishes, and work with scaffolding and power tools.

Minimum 4 years industrial construction/maintenance experience is required. You’ll read work orders, estimate material needs, and prioritize safety while delivering quality finishes on challenging projects.