Industrial Fabrication Painter

Farrior Steel Works; Farmville (NC); On-site; USD 42,000 - 52,000; Full time

Job summary

Farrior Steel Works seeks skilled workers for surface preparation and coating application. You will prepare surfaces using blasting, sanding, or cleaning, then apply coatings by spray, brush, or roller, in accordance with coating specs and thickness measurements.

Responsibilities include masking, touch-ups, and final inspection while following PPE rules and safety procedures. Proficiency with tools and ability to read work orders and blueprints is essential.

Qualifications

• Experience with surface prep and coatings application per job orders.
• Ability to read and follow work orders, blueprints, and specification sheets.
• Attention to detail to ensure high-quality finishes.

Responsibilities

• Prepare surfaces using abrasive blasting, sanding, or cleaning.
• Mix and apply coatings by spray, brush, or roller.
• Mask, touch up, and perform final inspection of coated surfaces.
• Use spray equipment, blasting cabinets, and hand tools according to procedures.

Skills

Surface preparation

Coatings application

Blueprints & work orders

Masking & touch-ups

Tool & equipment handling

Attention to detail

Job description

Technical skills and tasks

• Surface preparation: abrasive blasting, power-tool cleaning, sanding, solvent cleaning, grinding.
• Mixing and applying coatings by spray (airless/air), brush, and roller.
• Knowledge of coating specifications, mil thickness, wet-film/dry-film thickness measuring.
• Ability to read and follow work orders, blueprints, and specification sheets.
• Perform masking, masking removal, touch-ups, and final inspection.
• Use and maintain spray equipment, compressors, blasting cabinets, and hand tools.

Safety, compliance, and quality

• Strong knowledge of PPE use (respirators, gloves, coveralls, eye/face protection) and safe handling of paints, thinners, and solvents.
• Familiar with MSDS/SDS, hazardous materials labeling, and waste disposal procedures.
• Knowledge of shop safety rules, confined-space awareness, and fall protection as applicable.
• Ability to follow SSPC/AMPP or project-specific coating procedures and quality standards.
• Basic familiarity with air monitoring, ventilation, and fire prevention in painting areas.

Certifications (preferred)

• Respirator fit-test and medical clearance (per OSHA).
• OSHA 10-hour or 30-hour safety card.
• SSPC/AMPP coating applicator or inspector courses (preferred).
• HAZWOPER or hazardous materials training if applicable.

Physical demands and work conditions

• Able to stand, bend, kneel, climb ladders/scaffolds, and lift 50+ lbs.
• Comfortable working in enclosed booths, outdoors, or at heights; exposure to fumes, dust, and noise.
• Able to work shifts and overtime as needed to meet production schedules.

Soft skills

• Attention to detail and strong visual quality standards.
• Good communication and ability to work on a team.
• Time management and ability to meet deadlines.

Optional/advanced skills (added value)

• Experience with powder coating, catalytic coatings, or specialty marine/industrial coatings.
• Ability to perform simple coating inspections and document results.
• Basic welding/metal-repair skills for touch-up prior to coating.