Industrial Engineer

Overhead Door Corporation

New York (NY)

Presencial

USD 75.000 - 110.000

Jornada completa

Hace 6 días
Sé de los primeros/as/es en solicitar esta vacante

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Descripción de la vacante

Overhead Door Corporation is seeking an Industrial Engineer to design and sustain efficient manufacturing systems. You will translate priorities into measurable SQDCCP improvements, focusing on labor standards, line balancing and capacity analysis to boost safety, quality, delivery and cost.

Work closely with operators, supervisors and value stream managers to establish repeatable processes, develop plant capability, and lead lean initiatives—delivering sustained benefits across shifts and

Formación

  • Bachelor's degree in Industrial or Manufacturing Engineering, Mechanical Engineering or related field.
  • Experience with work measurement, production analysis or process improvement.
  • Proficiency with Excel and reading process layouts and drawings; ERP familiarity.

Responsabilidades

  • Design, improve and sustain safe, reliable manufacturing systems.
  • Translate operating priorities into SQDCCP improvements with emphasis on time studies and capacity.
  • Collaborate with operators and managers to establish repeatable processes and plant capability.
  • Lead projects without direct supervision and drive lean problem solving across shifts.
  • Verify that improvements are sustained in daily operations.

Conocimientos

Work measurement
Time studies
Labor standards
Line balancing
Capacity analysis
Layout design
Ergonomics
Lean problem solving
Excel
Engineering drawings
ERP familiarity
Project leadership

Educación

Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering or related

Herramientas

CAD layout tools
Power BI
Statistical analysis
Discrete-event simulation
Automation business cases

Descripción del empleo

Design, improve and sustain safe, reliable manufacturing systems that integrate people, equipment, materials and information. The Industrial Engineer translates ASD operating priorities into practical improvements in Safety, Quality, Delivery, Cost, Cash and People (SQDCCP), with emphasis on work measurement, labor standards, capacity, productivity and material flow. Work directly with operators, supervisors and value stream managers to solve operating problems at the gemba, establish repeatable processes and develop plant capability through the ASD Lean Operating System / D.O.O.R. Performance System. Deliver measurable improvements and verify that benefits are sustained in daily operations.

  • Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering or a related engineering discipline.
  • Demonstrated manufacturing experience through employment, internship or cooperative education, with practical exposure to work measurement, production analysis or process improvement. Project scope and independence will match the assigned job level.
  • Working knowledge of time studies, labor standards, line balancing, capacity analysis, layout design, ergonomics and Lean problem solving.
  • Ability to analyze operational data, validate assumptions and communicate recommendations clearly to operators, managers and functional partners.
  • Proficiency with Excel and the ability to read process layouts and engineering drawings; familiarity with ERP or manufacturing data systems.
  • Ability to lead projects without direct supervisory authority and work effectively across shifts and functions.
Preferred Experience
  • Five or more years of industrial or manufacturing engineering experience in a high-mix production environment.
  • Experience in building products, metal fabrication, forming, finishing, assembly, packaging or comparable processes.
  • Hands-on improvement results using Lean or Six Sigma methods; relevant certification is helpful but does not replace demonstrated application.
  • Experience with CAD layout tools, Power BI, statistical analysis, discrete-event simulation or automation business cases.
  • Experience validating financial benefits, updating ERP standards or supporting launches and production transfers.
Work Requirements
  • Primarily an on-site role with regular presence in active manufacturing and warehouse areas and participation across shifts as needed.
  • Travel to other ASD facilities, suppliers or training locations as business needs require.
  • Follow all site safety requirements and use required personal protective equipment. Perform essential duties, including observing processes and accessing production areas, with or without reasonable accommodation.
  • Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering or a related engineering discipline.
  • Demonstrated manufacturing experience through employment, internship or cooperative education, with practical exposure to work measurement, production analysis or process improvement. Project scope and independence will match the assigned job level.
  • Working knowledge of time studies, labor standards, line balancing, capacity analysis, layout design, ergonomics and Lean problem solving.
  • Ability to analyze operational data, validate assumptions and communicate recommendations clearly to operators, managers and functional partners.
  • Proficiency with Excel and the ability to read process layouts and engineering drawings; familiarity with ERP or manufacturing data systems.
  • Ability to lead projects without direct supervisory authority and work effectively across shifts and functions.
Preferred Experience
  • Five or more years of industrial or manufacturing engineering experience in a high-mix production environment.
  • Experience in building products, metal fabrication, forming, finishing, assembly, packaging or comparable processes.
  • Hands-on improvement results using Lean or Six Sigma methods; relevant certification is helpful but does not replace demonstrated application.
  • Experience with CAD layout tools, Power BI, statistical analysis, discrete-event simulation or automation business cases.
  • Experience validating financial benefits, updating ERP standards or supporting launches and production transfers.
Work Requirements
  • Primarily an on-site role with regular presence in active manufacturing and warehouse areas and participation across shifts as needed.
  • Travel to other ASD facilities, suppliers or training locations as business needs require.
  • Follow all site safety requirements and use required personal protective equipment. Perform essential duties, including observing processes and accessing production areas, with or without reasonable accommodation.
Safety, Ergonomics and Work Design
  • Apply the ASD Safety Golden Rules and partner with EHS to identify and reduce ergonomic, handling and process risks. Integrate safe work methods into workstation design and standard work.
  • Evaluate reach, posture, lifting, repetitive motion and material presentation; recommend practical engineering controls and verify effectiveness with affected employees.
  • Ensure proposed changes receive required safety, quality and technical reviews before implementation. Escalate unsafe conditions promptly.
Work Measurement and Labor Standards
  • Conduct time studies, work sampling and method analysis across shifts and representative product mixes. Separate manual time, machine time, setup, walking, waiting and avoidable losses.
  • Develop and maintain documented labor and setup standards using approved methods, representative observations and justified allowances. Validate methods with operators and supervisors and update standards after process changes.
  • Create standard work, work instructions and labor-balance charts with Operations and Quality. Establish sustainable staffing models that reflect demand, mix, training, breaks and operating constraints.
Capacity, Constraints and Production Flow
  • Develop demonstrated-capacity models using product mix, cycle times, changeovers, yield, downtime and available operating hours. Distinguish theoretical capacity from sustainable output.
  • Identify system constraints and improve throughput through line balancing, setup reduction, workload redistribution and targeted loss elimination. Avoid improving local utilization at the expense of total flow.
  • Support Materials and Planning with capacity, routing and run-rate inputs for demand planning, scheduling, build-ahead decisions and backlog recovery. Quantify gaps and alternatives before customer commitments are made.
Layout and Materials Flow
  • Design plant, cell and workstation layouts that improve safety, flow, space utilization and access for maintenance. Evaluate point-of-use storage, replenishment routes and packaging with Materials and Operations.
  • Map current and future material and information flows; reduce unnecessary travel, handling, queue time and work-in-process. Establish pull, replenishment and inventory parameters with Materials where appropriate.
  • Apply these methods to OHD door and component manufacturing, assembly, finishing, packaging and shipping processes as applicable to the assigned facility.
ASD Lean Operating System and Problem Solving
  • Support SQDCCP daily management, tiered escalation, leader standard work, visual controls and plant bowler priorities. Translate gaps into scoped projects with baselines, owners, milestones and sustainment plans.
  • Facilitate PDCA, root-cause analysis, kaizen, 5S, standard work, value stream mapping and changeover reduction. Select tools based on the problem and coach employees in their practical use.
  • Partner with Quality and Manufacturing Engineering on defect reduction, process capability, error prevention and equipment-loss analysis. Use OEE where relevant and distinguish availability, performance and quality losses.
Financial Benefits and Project Execution
  • Build business cases with Finance, including baseline, investment, implementation cost, annual benefit, in-year timing and payback. Separate realized savings, cost avoidance, capacity release and working-capital release; prevent double counting.
  • Lead assigned projects through implementation, training and operational handoff. Verify benefits with Finance and operating owners and confirm sustained performance after completion.
  • Transfer methods and documentation from consultants or contractors to OHD employees. Share proven improvements across ASD plants using common standards.
Safety, Ergonomics and Work Design
  • Apply the ASD Safety Golden Rules and partner with EHS to identify and reduce ergonomic, handling and process risks. Integrate safe work methods into workstation design and standard work.
  • Evaluate reach, posture, lifting, repetitive motion and material presentation; recommend practical engineering controls and verify effectiveness with affected employees.
  • Ensure proposed changes receive required safety, quality and technical reviews before implementation. Escalate unsafe conditions promptly.
Work Measurement and Labor Standards
  • Conduct time studies, work sampling and method analysis across shifts and representative product mixes. Separate manual time, machine time, setup, walking, waiting and avoidable losses.
  • Develop and maintain documented labor and setup standards using approved methods, representative observations and justified allowances. Validate methods with operators and supervisors and update standards after process changes.
  • Create standard work, work instructions and labor-balance charts with Operations and Quality. Establish sustainable staffing models that reflect demand, mix, training, breaks and operating constraints.
Capacity, Constraints and Production Flow
  • Develop demonstrated-capacity models using product mix, cycle times, changeovers, yield, downtime and available operating hours. Distinguish theoretical capacity from sustainable output.
  • Identify system constraints and improve throughput through line balancing, setup reduction, workload redistribution and targeted loss elimination. Avoid improving local utilization at the expense of total flow.
  • Support Materials and Planning with capacity, routing and run-rate inputs for demand planning, scheduling, build-ahead decisions and backlog recovery. Quantify gaps and alternatives before customer commitments are made.
Layout and Materials Flow
  • Design plant, cell and workstation layouts that improve safety, flow, space utilization and access for maintenance. Evaluate point-of-use storage, replenishment routes and packaging with Materials and Operations.
  • Map current and future material and information flows; reduce unnecessary travel, handling, queue time and work-in-process. Establish pull, replenishment and inventory parameters with Materials where appropriate.
  • Apply these methods to OHD door and component manufacturing, assembly, finishing, packaging and shipping processes as applicable to the assigned facility.
ASD Lean Operating System and Problem Solving
  • Support SQDCCP daily management, tiered escalation, leader standard work, visual controls and plant bowler priorities. Translate gaps into scoped projects with baselines, owners, milestones and sustainment plans.
  • Facilitate PDCA, root-cause analysis, kaizen, 5S, standard work, value stream mapping and changeover reduction. Select tools based on the problem and coach employees in their practical use.
  • Partner with Quality and Manufacturing Engineering on defect reduction, process capability, error prevention and equipment-loss analysis. Use OEE where relevant and distinguish availability, performance, quality losses.
Financial Benefits and Project Execution
  • Build business cases with Finance, including baseline, investment, implementation cost, annual benefit, in-year timing and payback. Separate realized savings, cost avoidance, capacity release and working-capital release; prevent double counting.
  • Lead assigned projects through implementation, training and operational handoff. Verify benefits with Finance and operating owners and confirm sustained performance after completion.
  • Transfer methods and documentation from consultants or contractors to OHD employees. Share proven improvements across ASD plants using common standards.
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Industrial Engineer
Industrial Engineer

Overhead Door Corporation • Mount Hope (WV)

Presencial
USD 70.000 - 90.000
Industrial Engineer
Industrial Engineer

Overhead Door Corporation • Williamsport

Presencial
USD 70.000 - 100.000
Industrial Engineer
Industrial Engineer

Overhead Door Corporation • Grand Island (NE)

Presencial
USD 70.000 - 95.000
Industrial Engineer
Industrial Engineer

Overhead Door • Lewistown

Presencial
USD 85.000 - 110.000
Industrial Engineer
Industrial Engineer

Overhead Door Corporation • Lewistown

Presencial
USD 75.000 - 110.000
Manufacturing Plant Manager
Manufacturing Plant Manager

Overhead Door Corporation • Mount Hope (OH)

Presencial
USD 120.000 - 180.000
Senior Industrial Reliability Engineer
Senior Industrial Reliability Engineer

Allied Interiors Group • DeSoto (TX)

Presencial
USD 100.000 - 150.000
Manufacturing Engineer
Manufacturing Engineer

Overhead Door Corporation • Pensacola (FL)

Presencial
USD 70.000 - 105.000
Senior Industrial Reliability Engineer — Lean & Data-Driven
Senior Industrial Reliability Engineer — Lean & Data-Driven

Allied Interiors Group • DeSoto (TX)

Presencial
USD 100.000 - 150.000
Senior Industrial Engineer
Senior Industrial Engineer

Klein Tools • Mansfield (TX)

Presencial
USD 85.000 - 120.000