Industrial Automation Electrician

Dauch; Three Rivers (MI); On-site; USD 60,504,000 - 66,455,000; Full time

Job summary

Dauch Corporation, based in Detroit, MI, seeks an Industrial Automation Electrician to install, troubleshoot, and maintain electrical and control systems for CNC machines and automated lines. The role emphasizes 480V electrical work, servo drives, PLCs, sensors, and system integration to maximize uptime and safety.

The candidate should have journeyman-level experience, strong diagnostic skills, and capability to work across shifts in a high-volume manufacturing setting.

Qualifications

• High school diploma or GED required; associate degree or technical certificate preferred.
• Valid journeyman card with 5+ years experience or equivalent certification.
• 3+ years in industrial electrical work focused on CNC/robotics and PLC controls.
• Strong knowledge of motor controls, three-phase power, and diagnostics.
• Hands-on PLC programming/troubleshooting with ladder logic.
• CNC controls knowledge (Fanuc/Siemens/Okuma) and safety standards.
• Ability to read drawings and interpret schematics for repairs and upgrades.

Responsibilities

• Troubleshoot and diagnose electrical and control issues on CNC machines, robots, and automated systems.
• Perform preventive and corrective maintenance on servo motors, VFDs, sensors, and safety devices.
• Read, modify, and create electrical schematics and control panel layouts.
• Troubleshoot PLCs, HMIs, and robot teach pendant operations; assist with fault analysis.
• Install and test control panels, field devices, and cabling for new equipment.
• Support integration of robotics with CNC systems and safety-rated controls.
• Collaborate with multi-craft teams during installs, startups, and downtime analysis.
• Conduct lockout/tagout and arc flash safety procedures; maintain safety records.
• Document repairs and changes in CMMS; generate recurring issue reports.

Skills

PLC troubleshooting

CNC/robotics knowledge

Electrical theory

Three-phase power

VFDs & servo systems

Diagnostics tools

Troubleshooting automation systems

Education

High school diploma or GED

Associates degree or technical certificate

Tools

RSLogix/Studio 5000

TIA Portal

Job description

Job Description Summary

The Industrial Automation Electrician is a skilled journeyman-level electrician specializing in the installation, troubleshooting, maintenance, and repair of electrical and control systems for CNC machine tools, industrial robots, automated production lines, and related equipment. This role focuses on electrical systems up to 480V, but not limited to PLCs, servo drives, sensors, VFDs, and integration of automation systems to ensure maximum equipment uptime, precision, and safety in a high-volume manufacturing environment. The position bridges traditional electrical work with advanced systems and automation, enabling proactive diagnostics and repairs on complex CNC and robotic systems. Starting wage for an Industrial Automation Electrician is $42.00/hour plus shift premium for 2nd and 3rd shift. Rates top out at $48 an hour.

Job Posting Title

Industrial Automation Electrician

Job Description Summary

The Industrial Automation Electrician is a skilled journeyman-level electrician specializing in the installation, troubleshooting, maintenance, and repair of electrical and control systems for CNC machine tools, industrial robots, automated production lines, and related equipment. This role focuses on electrical systems up to 480V, but not limited to PLCs, servo drives, sensors, VFDs, and integration of automation systems to ensure maximum equipment uptime, precision, and safety in a high-volume manufacturing environment. The position bridges traditional electrical work with advanced systems and automation, enabling proactive diagnostics and repairs on complex CNC and robotic systems. Starting wage for an Industrial Automation Electrician is $42.00/hour plus shift premium for 2nd and 3rd shift. Rates top out at $48 an hour.

Job Description

• Troubleshoot and diagnose electrical and control issues on CNC machines (lathes, mills, grinders), industrial robots (Fanuc), and automated systems using multimeters, oscilloscopes, PLC software, and diagnostic tools.
• Perform preventive and corrective maintenance on electrical components including servo motors, encoders, VFDs, servo amplifiers, proximity sensors, limit switches, safety interlocks, light curtains, and emergency stops.
• Read, interpret, and modify electrical schematics, ladder logic diagrams, and control panel layouts to support repairs, retrofits, and upgrades.
• Troubleshoot PLCs (Allen-Bradley, Siemens), HMI interfaces, and basic robot teach pendant operations; assist with parameter adjustments and fault code analysis.
• Install, wire, and test control panels, field devices, communication networks (Ethernet/IP, Profibus, IO-Link), and cabling for new equipment or modifications.
• Support integration of robotics and automation with CNC systems, including end-of-arm tooling, conveyors, vision systems, and safety-rated controls.
• Collaborate with multi-craft technicians, machine repair, and engineering teams during equipment installations, startups, and root-cause analysis of downtime events.
• Perform lockout/tagout, arc flash safety protocols, and risk assessments for electrical work on live or powered equipment.
• Maintain accurate records of repairs, parts usage, and system changes in the CMMS; generate reports on recurring issues to drive continuous improvement.

Required Skills And Education

• High school diploma or GED required; associate degree or technical certificate in industrial electricity, automation, controls, or mechatronics preferred.
• Valid 4 year journeyman card or minimum of 5 years verifiable experience - electrician license or equivalent certification (state license, IEC, or IBEW apprenticeship completion).
• 3+years of industrial electrical experience, with at least 2+ years focused on CNC machines, robotics, PLC controls, or automated manufacturing equipment.
• Strong knowledge of electrical theory, three-phase power distribution, motor controls, and troubleshooting techniques.
• Hands‑on experience with PLC programming/troubleshooting (ladder logic preferred), servo systems, VFDs, and industrial networks.
• CNC controls knowledge (Fanuc, Siemens, Okuma), robot controllers, and safety standards (NFPA 79, ANSI/RIA R15.06 for robotics).
• Proficiency in using diagnostic tools: multimeters, oscilloscopes, megger testers, PLC software (RSLogix/Studio 5000, TIA Portal), and robot teach pendants.
• Ability to read and interpret technical drawings, schematics, and manuals; basic understanding of G-code/M-code for CNC diagnostics a plus.
• Physically able to lift 50+ lbs, work in awkward positions, climb ladders, and enter confined spaces.
• Excellent problem-solving skills, attention to detail, and ability to work independently or in teams under time pressure.
• Must pass pre‑employment drug screen, background check, and any required physical or skills assessments.
• Available to work overtime and flexible schedule as required within union facility agreement.
• Available to work any shift as required.

Preferred Skills And Certifications

• Experience with specific platforms: Allen‑Bradley ControlLogix/CompactLogix, Fanuc CNC/Robotics, Siemens S7, or similar.
• Knowledge of predictive maintenance tools (vibration analysis, thermography) and basic networking/IT for automation systems.

About Dauch

Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain‑agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles. The company is headquartered in Detroit, MI, with operations that span 24 countries and more than 175 locations. Formed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward.

Visit www.dauch.com to learn more.

Dauch will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. Dauch will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e‑mail [e-mail]. Dauch is an equal opportunity/affirmative action employer.