Industrial Abrasive Blaster

Loenbro Southwest; Arizona; On-site; USD 55,000 - 70,000; Full time

Benefits offered by this job

Medical, dental, and vision insurance

401(k) retirement plan with company 
匹

PTO and holidays

Life and disability insurance

Job summary

Loenbro, LLC is seeking an Industrial Abrasive Blaster for our Chandler fabrication facility. You will prepare steel surfaces to SSPC standards prior to coating, supporting structural fabrication and coatings operations.

The role emphasizes safety, quality, and production efficiency, with hands-on blasting, equipment setup, and collaboration with the coatings crew to maintain workflow in a heavy industrial shop.

Qualifications

• Minimum 2 years of experience in industrial abrasive blasting.
• Knowledge of SSPC surface preparation standards.
• Ability to read and follow work orders and inspection checklists.

Responsibilities

• Operate pressure blast equipment to clean and profile structural steel and assemblies to SSPC/NACE standards.
• Inspect surfaces before and after blasting for defects and contaminants.
• Set up and break down blast equipment and monitor air pressure/abrasive flow.
• Coordinate with coatings crew to maintain production flow.
• Ensure proper containment and waste disposal per EH&S policies.

Skills

Abrasive blasting

Reading orders

Safety compliance

Tools

SSPC SP-6

SSPC SP-10

SSPC SP-5

Job description

Industrial Abrasive Blaster

Company: Loenbro, LLC
Location: Chandler, AZ (Riggs Fabrication Shop)
Employment Type: Full-Time
FLSA Classification: Non-Exempt

Job Summary

We are looking for an experienced Industrial Abrasive Blaster to join our coatings team at our Chandler fabrication facility. This is a hands-on production role supporting structural steel fabrication and coatings operations. You will be responsible for preparing steel — beams, plates, pipe, tanks, and fabricated assemblies — to specified surface profile standards prior to coating application. This position requires a strong commitment to safety, quality, and production efficiency.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Essential Job Responsibilities

• Operate pressure blast equipment to clean and profile structural steel and fabricated assemblies to SSPC/NACE surface preparation standards (SP-6, SP-10, SP-5)
• Read and interpret work orders, drawings, coating specifications, and inspection requirements to determine correct blast profile and anchor pattern
• Inspect surfaces prior to blasting and after for mill scale, rust, weld spatter, and contaminants; communicate deficiencies to the lead or QC.
• Set up and break down blast equipment including pots, hoses, nozzles, and containment
• Monitor and adjust air pressure and abrasive flow to achieve specified surface finish
• Perform daily equipment inspections — check hoses, couplings, nozzles, and deadman handles; report deficiencies immediately
• Work in coordination with the coatings crew to maintain production flow and minimize time between blast and coat
• Maintain the blast area; reclaim and recycle abrasive media where applicable
• Properly dispose of blast waste in accordance with site EHS procedures and waste manifests
• Follow all PPE requirements — supplied air respirator, blast hood, leather gloves, hearing protection, and steel-toed boots are required at all times in the blast area

Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

• Minimum 2 years of experience in industrial abrasive blasting, preferably in structural steel fabrication or industrial coatings. Experience blasting concrete is a plus.
• Working knowledge of SSPC surface preparation standards (SP-6, SP-10, SP-5)
• Hands-on experience with pressure blast equipment operation and basic maintenance
• Ability to read and follow work orders, coating data sheets, and inspection checklists
• Respirator fit test and medical clearance required (coordinated through Loenbro)
• Must be able to lift up to 50 lbs, work in full PPE, and perform physically demanding tasks for extended periods
• Must pass pre-employment drug screen and background check

Preferred:

• OSHA 10 Construction or General Industry certification
• SSPC-BCS (Blasting and Coating Specialist) certification or equivalent
• Experience with NACE coating inspection and surface profile measurement tools (Testex tape, DFT gauge)
• Familiarity with ISO 12944 or AISC coating specifications
• Experience working in a fabrication shop or industrial coatings environment
• Valid driver’s license

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Industrial fabrication shop environment — exposure to dust, abrasive media, noise, and chemical fumes is inherent to this role
• Phoenix, AZ climate — outdoor and semi-enclosed blast areas subject to extreme heat; ability to work safely in high-temperature conditions required
• Full PPE required at all times in the blast area: supplied air respirator, blast hood, leather gloves, hearing protection, and steel-toed boots
• May be required to work in confined spaces or at height; confined space and fall protection training provided

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro’s Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

• L** ive with Integrity** – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.
• E** xceed Expectations** – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.
• A** ct with Urgency** – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.
• D** eliver Excellence** – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values , grounded in grit and a commitment to excellence , Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

Loenbro is an Equal Opportunity Employer.