Hvac Installer

Aerotek

Aurora (IL)

On-site

USD 41,000 - 55,000

Full time

13 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Weekly pay
Medical, dental & vision
401(k) Retirement Plan

Job summary

Aerotek is seeking an HVAC Installer to join our field operations on active construction sites across commercial and multi-family projects in the Aurora, IL area. You will install HVAC units and ductwork, perform sheet metal work, and fabricate duct components while reading blueprints to ensure precise installations.

The role involves traveling to multiple job sites using your own vehicle, bringing basic hand tools, and working on a fully onsite basis with tools provided for larger or specialty

Qualifications

  • Proven sheet metal fabrication experience in a construction or HVAC setting.
  • Hands-on new construction HVAC installation experience.
  • Ductwork installation experience, including layout, routing, and fastening.
  • Ability to read and interpret blueprints and construction drawings.
  • Proficiency with hand tools used in sheet metal and HVAC work.
  • Proficiency with power tools used for cutting and fabricating sheet metal.
  • Strong understanding of sheet metal work, including bending, cutting, and assembling duct systems.
  • Ability to measure accurately for precise fabrication and installation.

Responsibilities

  • Install HVAC units and ductwork on active construction sites for commercial and multi-family residential projects.
  • Perform sheet metal work: bending, cutting, shaping, and fabricating duct components.
  • Fabricate and assemble sheet metal duct systems with appropriate tools.
  • Read blueprints and construction drawings for accurate layout.
  • Route ductwork to designated locations with proper support and alignment.
  • Use hand and power tools safely to cut, drill, shear and fasten components.
  • Travel to multiple job sites using personal vehicle as required.
  • Coordinate with other trades on site to complete installations on time.
  • Maintain clean, organized work area and store tools properly.
  • Inspect installations for quality and adherence to requirements.

Job description

HVAC Installer
Overview

This role focuses on installing HVAC units and ductwork on active construction sites across a range of projects, from small commercial retail spaces to large multi-family residential complexes. You will perform sheet metal work, including bending, cutting, and fabricating duct systems, while accurately reading and following blueprints to ensure high-quality installations. The position requires traveling to various job sites using your own vehicle and bringing basic hand tools, while specialty and larger tools are provided.

Responsibilities
  • Install HVAC units and associated ductwork on active construction job sites for both commercial and multi-family residential projects.
  • Perform sheet metal work, including bending, cutting, and shaping duct components to meet project specifications.
  • Fabricate and assemble sheet metal duct systems using appropriate tools and techniques.
  • Read and interpret blueprints and construction drawings to ensure accurate layout and installation of HVAC systems.
  • Run ductwork to designated locations throughout buildings, ensuring proper routing, support, and alignment.
  • Use hand tools and power tools safely and effectively to cut, drill, shear, and fasten sheet metal and duct components.
  • Measure and mark materials using tape measures and other measuring tools to achieve precise cuts and fits.
  • Work on active new construction sites, both indoors and outdoors, while following site safety procedures and guidelines.
  • Travel to multiple job sites using a personal vehicle as required by project schedules and locations.
  • Coordinate with other trades and team members on site to complete installations efficiently and on time.
  • Maintain a clean and organized work area, including proper handling and storage of tools and materials.
  • Inspect completed installations for quality, accuracy, and adherence to project requirements.
Essential Skills
  • Proven sheet metal fabrication experience in a construction or HVAC setting.
  • Hands-on new construction HVAC installation experience.
  • Ductwork installation experience, including layout, routing, and fastening.
  • Ability to read and interpret blueprints and construction drawings.
  • Proficiency with hand tools such as tape measures, snips, and basic hand tools used in sheet metal and HVAC work.
  • Proficiency with power tools, including drills, shears, and other equipment used for cutting and fabricating sheet metal.
  • Strong understanding of sheet metal work, including bending, cutting, and assembling duct systems.
  • Ability to use measuring tools accurately to ensure precise fabrication and installation.
  • Capability to travel to various job sites using a personal vehicle.
  • Ability to work safely and effectively on active construction sites.
Why Work Here?

You join a well-established HVAC organization with a strong and steady project pipeline, offering consistent work throughout the year, including winter months. The role provides a contract-to-hire path, giving you the opportunity to grow into a long-term position with stability and career progression. You work on a wide variety of projects, allowing you to develop your skills across different types of construction while being supported with the specialty tools and resources needed to succeed.

Work Environment

You work on active new-build construction sites, both indoors and outdoors, across a mix of commercial and multi-family residential projects. The environment involves typical construction conditions, including exposure to varying weather, noise, and physical activity such as standing, lifting, and working at heights or in tight spaces. You travel to job sites using your own vehicle and bring basic hand tools, while specialty and larger tools are supplied. You regularly use hand tools and power tools, such as drills, shears, and measuring equipment, in a fast-paced, project-driven setting.

Job Type & Location

This is a Contract to Hire position based out of Aurora, IL.

Pay and Benefits

The pay range for this position is $30.00 - $40.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your jobclassification and length of employment. Benefits are subject to change and may besubject to specific elections, plan, or program terms. If eligible, the benefitsavailable for this temporary role may include the following:

Medical, dental & visionCritical Illness, Accident, and Hospital401(k) Retirement Plan Pre-tax and Roth post-tax contributions availableLife Insurance (Voluntary Life & AD&D for the employee and dependents)Short and long-term disabilityHealth Spending Account (HSA)Transportation benefitsEmployee Assistance ProgramTime Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Aurora, IL.

Application Deadline

This position is anticipated to close on Nov 17, 2026.

Workplace Type

This is a fully onsite position in Aurora,IL.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sheet Metal Fabricator
Sheet Metal Fabricator

Aerotek • Ashland (VA)

On-site
USD 34,000 - 40,000
Medical, dental & vision
401(k) plan with company match
Weekly pay
Sheet Metal Mechanic
Sheet Metal Mechanic

Aerotek • Ocala (FL)

On-site
USD 34,000 - 39,000
Medical, dental & vision
401(k) Retirement Plan
Life Insurance
+2
HVAC Technician
HVAC Technician

Aerotek • Jeffersontown (KY)

On-site
USD 34,000 - 62,000
Medical benefits
Dental & Vision
401(k) Plan
+3
Technician
Technician

Aerotek • Cedar Rapids (IA)

On-site
USD 25,000 - 28,000
Weekly pay
Medical, dental & vision
401(k)
+2
Lead Electrician
Lead Electrician

Aerotek • Charlotte (NC)

On-site
USD 52,000 - 74,000
Medical, dental & vision
Weekly pay
401(k) Retirement Plan
Heavy Industrial Assembler
Heavy Industrial Assembler

Aerotek • San Jose (CA)

On-site
USD 41,000 - 55,000
Weekly pay
Medical, dental & vision
401(k) plan
+6
Hvac Service Technician
Hvac Service Technician

Aerotek • Saginaw (MI)

On-site
USD 62,000 - 104,000
Medical, dental & vision
401(k) plan
Life Insurance
+4
Carpenter Foreman | Urgent Hire | Pay - 18$ - 30$
Carpenter Foreman | Urgent Hire | Pay - 18$ - 30$

Aerotek • Tobyhanna Township (PA)

On-site
USD 25,000 - 41,000
Weekly pay
Medical, dental & vision
Life Insurance
+3
Mechanical Assembler
Mechanical Assembler

Aerotek • Elmhurst (IL)

On-site
USD 26,000 - 32,000
Health insurance
401(k) program
Paid time off
+1
Sheet Metal Fabricator
Sheet Metal Fabricator

Aerotek • Greensboro (NC)

On-site
USD 28,000 - 34,000
Medical, dental & vision
401(k) Retirement Plan
Life Insurance
+3