Harness Engineer

ICEYE

Warsaw (IN)

Hybrid

USD 46,000 - 81,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ICEYE is seeking a Harness Engineer in Warsaw to lead the end-to-end harness build process for satellite programs. You will craft and maintain instructions, bridge design and production, and drive verification, testing, and continuous improvement on the shop floor.

You will collaborate with engineering and AIT teams to ensure compliance with IPC/WHMA-A-620, ECSS, and internal standards, while mentoring technicians and maintaining a clean, safe, and traceable environment.

Qualifications

  • A degree in Electrical, Electronics, Mechatronics or Aerospace Engineering or related discipline.
  • At least 3 years in cable and harness manufacturing or high-reliability production.
  • Ability to read drawings, wire tables, schematics and translate to work instructions.
  • Experience with electrical testing of harnesses and acceptance criteria.
  • Structured problem-solving with NCRs and root-cause analysis.
  • Clear English communication for cross-functional teams.

Responsibilities

  • Own the harness build process from drawings to verified harness.
  • Write and maintain work instructions, travelers, checklists, and build procedures.
  • Bridge harness design and production with feedback on DFx, wire tables, routing.
  • Define verification and testing, design fixtures and tooling as needed.
  • Lead troubleshooting, manage NCRs, and drive corrective actions with Quality.
  • Support installation/integration with AIT team, ensuring standards compliance.
  • Ensure IPC/WHMA-A-620, ECSS, and internal standards with traceability.
  • Coach technicians and promote best practices to grow harness capability.
  • Maintain clean, organized, audit-ready workspace with proper ESD controls.

Skills

Harness manufacturing
Electrical testing
NCR/root-cause analysis
Reading schematics/diagrams
Cross-functional collaboration

Education

Electrical/Electronics/Mechatronics or Aerospace Eng degree

Tools

Zuken E3
Capital
SolidWorks Electrical

Job description

Role highlights:
  • Harness Engineer

  • Location: Warsaw, Poland

  • Department: Engineering, Optical Systems

  • Reports to: Satellite Build Engineering Lead

  • Employment type: Permanent

  • Workplace model: Hybrid

  • Employment is subject to applicable security screening (incl. SUPO, where required)

Why this role matters:

As a Harness Engineer, you build the electrical backbone of ICEYE’s satellites. Every subsystem on the spacecraft, from power to command and data handling, depends on harnesses being manufactured, routed, and verified correctly. You will execute assigned harness manufacturing, installation, and verification tasks with high precision, following established procedures and work instructions.

Who We Are

ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth.

ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system.

ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future.

Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific.

Your day-to-day responsibilities
  • Own the harness build process from drawings and wire tables to finished, verified harness, including manufacturing, installation, routing, and test

  • Write and maintain work instructions, travelers, checklists, and build procedures that technicians can follow with confidence

  • Act as the bridge between harness design and production, giving design-for-manufacturing (DfM) feedback on wire tables, connector choices, routing, and harness layouts

  • Define and improve verification and acceptance testing, including continuity, insulation resistance, and pin retention, and design or specify test fixtures and tooling

  • Lead troubleshooting of build and process issues on the floor, own NCRs, drive root cause analysis, and put corrective actions in place with Quality

  • Support harness installation and integration on satellite assemblies together with the Assembly, Integration and Test (AIT) team, making sure bend radii, strain relief, and routing standards are respected

  • Make sure work follows IPC/WHMA-A-620, ECSS, and internal standards, with full traceability and configuration control

  • Support and coach technicians, sharing best practices and helping the team build its harness capability

  • Keep a clean, organised, and audit-ready work environment that meets ESD, safety, and cleanliness standards

What we’re looking for
Must haves:
  • A degree in Electrical, Electronics, Mechatronics, or Aerospace Engineering, or a related technical discipline

  • At least 3 years of experience in cable and harness manufacturing, electromechanical assembly, or production engineering, ideally in aerospace, defence, or another high-reliability environment

  • Solid understanding of harness build techniques: crimping, soldering, shielding, lacing, connectorisation, and protective coverings

  • Ability to read and interpret technical drawings, wire tables, schematics, and wiring diagrams, and to turn them into practical work instructions

  • Experience with electrical testing of harnesses and with defining acceptance criteria

  • Structured problem-solving skills and experience with NCRs and root cause analysis

  • Clear communication skills and proficient English (written and spoken) for cross‑functional collaboration

Nice to haves:
  • IPC certifications, particularly IPC/WHMA-A-620 or IPC J-STD-001 (Space Addendum)

  • Familiarity with aerospace standards (ECSS, IPC) and configuration control

  • Experience with harness design tools (e.g. Zuken E3, Capital, SolidWorks Electrical) or 3D harness routing

  • Experience with coaxial, shielded, or high‑speed cable assemblies

  • Exposure to satellite integration or environmental test campaigns (vibration, thermal vacuum)

  • Previous work in a cleanroom or under formal ESD controls

Working at ICEYE

At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale‑up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win.

How We Work (Our Values)
  • Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way.

  • Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions.

  • See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others.

  • Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions.

  • Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift.

  • Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins.

Benefits

Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process.

Our Commitment to Diversity, Equity, and Inclusion

We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table.

We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help.

Read more about ICEYE and working with us at iceye.com.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Thermal & Harness AIT Engineer
Thermal & Harness AIT Engineer

ICEYE • California

On-site
USD 68,508 - 102,762
Valencia On-Site: Thermal & Harness AIT Engineer
Valencia On-Site: Thermal & Harness AIT Engineer

ICEYE • California

On-site
USD 68,508 - 102,762
Satellite Production Technician
Satellite Production Technician

ICEYE • Ohio

On-site
USD 44,000 - 66,000
AIT Technician
AIT Technician

ICEYE • Kentucky

On-site
USD 34,000 - 48,000
AIT Engineer - Electronics
AIT Engineer - Electronics

ICEYE • Kentucky

On-site
USD 68,000 - 103,000
Satellite Production Senior Technician, Electronics
Satellite Production Senior Technician, Electronics

ICEYE • New Mexico

On-site
USD 47,000 - 73,000
Quality Assurance Technician
Quality Assurance Technician

ICEYE • New Mexico

On-site
USD 46,000 - 59,000
AIT Engineer - Mechanical
AIT Engineer - Mechanical

ICEYE • Kentucky

On-site
USD 75,000 - 110,000
Continuous professional development
Competitive benefits package
Satellite Production Technician, Integration, Mechanical & Thermal
Satellite Production Technician, Integration, Mechanical & Thermal

ICEYE • California

On-site
USD 36,537 - 54,806
Senior Technician (Integration, Mechanical & Thermal)
Senior Technician (Integration, Mechanical & Thermal)

ICEYE • New Mexico

On-site
USD 53,000 - 79,000