Hand Finisher/Deburr - Night Shift

Triumph Group

Michigan

On-site

USD 42,000 - 64,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

19 Days PTO
Health Insurance
401(k) Match
Educational Assistance

Job summary

Triumph Group in Macomb, MI, seeks a Hand Finisher/Deburr (Parts Mark) for the night shift, responsible for deburring aircraft gears and housings, sand blasting, heat treat prep, and visual inspection. Training starts on a day shift before transitioning to night shift.

The role requires following prints, using hand tools, and maintaining traceability through paperwork; safety and quality come first in a climate-controlled environment.

Qualifications

  • High school diploma or equivalent required.
  • Experience in deburring aircraft gears and housings preferred.
  • Familiar with lean manufacturing and continuous improvement techniques beneficial.
  • Thorough understanding of or ability to quickly learn production equipment.
  • Ability to read blueprints preferred.
  • Able to complete fine finish work using bore scopes and magnification devices.
  • Ability to understand process sketches and drawings with selection of abrasives to ensure design intent.
  • Able to use Hand tool for Parts Marking serial numbers.
  • Strong analytical and problem-solving skills.

Responsibilities

  • Remove burrs and sharp edges from machined parts using hand tools.
  • May operate deburring machines, polishers, part washers and sandblasters.
  • Ensure conformance to print specifications by following instructions for deburring and/or lapping requirements.
  • Maintain a safe and clean working environment by complying with procedures, rules, and regulations.
  • Deburr metal parts by breaking sharp edges on all surfaces.
  • Complete required paperwork for traceability of product build.
  • Use hand-held tools for Parts Marking serial numbers.
  • Other duties as assigned.

Skills

Deburring
Blueprint reading
Hand tool use
Quality inspection
Problem solving
Lean manufacturing
Fine finish work

Education

High school diploma or equivalent

Job description

Triumph Group

Hand Finisher/Deburr - Night Shift

Job Summary

The Hand Finisher/Deburr (Parts Mark) at Triumph Geared Solutions Macomb is primarily responsible for deburring aircraft gears and complex housings, sand blasting, heat treat preparation and visual inspection of assignments. The Hand Finisher/Deburr (Parts Mark) must be able to produce high-quality products according to Triumph Geared Solutions Deburr Department and Parts Marking operations manual.

This is a night shift position. The new hire will initially train on day shift until all required training and certifications are completed before transitioning to night shift.

Duties/Responsibilities
  • Responsible for using portable air grinders, electric motors with mandrels, files, and other hand tools such as stones to remove burrs and other sharp edges from a variety of machined parts.
  • May operate deburring machines, polishers, part washers and sandblasters.
  • Ensures that all products conform to print specifications by following operations/manufacturing instructions regarding deburring and/or lapping requirements for each part produced.
  • Maintains a safe and clean working environment by complying with procedures, rules, and regulations.
  • Deburr metal parts by breaking sharp edges on all internal and external surfaces using motorized, pneumatic, and manual methods
  • Completion of required paperwork allowing traceability of product build
  • Use of hand-held tools such as files / scrapers / buffer / wire brushes / grit paper and similar tools
  • Other duties as assigned.
Qualifications
  • High school diploma or equivalent required.
  • Previous experience in deburring of aircraft gears and housings is preferred.
  • Familiar with lean manufacturing and continuous improvement techniques is beneficial.
  • Thorough understanding of or the ability to quickly learn production equipment.
  • Ability to read blueprints is preferred.
  • Able to complete fine finish work using bore scopes and magnification devices.
  • Ability to understand process sketches and drawings along with selection of abrasives to ensure design intent is achieved.
  • Able to use Hand tool for Parts Marking serial numbers.
  • Strong analytical and problem-solving skills.
Physical Requirements
  • Ability to use hand tools.
  • Physical ability to operate and repair machines.
  • Prolonged periods of standing, walking, bending, or stretching
  • Work may require bending, carrying, lifting to fifty (50) pounds, pulling, pushing, and standing.
Triumph Offers Outstanding Benefits, Including:
  • 19 Days Paid Time Off (annual allotment), Prorated PTO based on date of hire
  • Company Paid Holidays
  • 2nd Shift hourly positions receive 15% shift Premium
  • Health Insurance starting on your first day
  • Company Paid Short Term Disability, Long Term Disability, Life Insurance, Accidental Death, and Dismemberment (AD&D)
  • Paid Parental Leave
  • Employee Assistance Program
  • 401(k) Match (75% match up to 6%)
  • Recognition and Service Award Programs
  • Educational Assistance Program
  • Employee Referral Program
  • Onsite Fitness Center Free!
  • Climate controlled environment

Triumph Group and all its divisions and subsidiaries are Equal Opportunity/Affirmative Action Employers. Triumph Group provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contactTGIapplicant@triumphgroup.comto request assistance. Include the title of the position and location in the subject line of your email so we may direct your email to the appropriate person. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

"An Equal Opportunity Employer - Minorities/Females/Disabled/Veterans" We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, or any other characteristic protected by law. Pursuant to International Traffic Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements.

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c).

Equal employment opportunity, including veterans and individuals with disabilities.

PI288423258

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Hand Finisher/Deburr - Night Shift
Hand Finisher/Deburr - Night Shift

TRIUMPH • Michigan

On-site
USD 25,000 - 33,000
19 Days Paid Time Off (annual)
Company Holidays
Shift premium on 2nd shift
+7
Title Hand Finisher/Deburr - Night Shift
Title Hand Finisher/Deburr - Night Shift

TRIUMPH Mexicali • Michigan

On-site
USD 42,000 - 64,000
19 Days PTO
Health Insurance start day 1
Shift premium 15%
+1
Night-Shift Deburr Tech for Aircraft Gears & Housings
Night-Shift Deburr Tech for Aircraft Gears & Housings

TRIUMPH • Michigan

On-site
USD 25,000 - 33,000
19 Days Paid Time Off (annual)
Company Holidays
Shift premium on 2nd shift
+7
Manual Grind Machinist - Night Shift
Manual Grind Machinist - Night Shift

Triumph Group • Macomb Township (MI)

On-site
USD 29,000 - 39,000
Health Insurance
2nd Shift 15% premium
19 Days PTO (annual)
+4
Night Shift Hand Finisher/Deburr – Aerospace Parts
Night Shift Hand Finisher/Deburr – Aerospace Parts

TRIUMPH Mexicali • Michigan

On-site
USD 42,000 - 64,000
19 Days PTO
Health Insurance start day 1
Shift premium 15%
+1
Mill Machinist - Day Shift
Mill Machinist - Day Shift

Triumph Group • Macomb Township (MI)

On-site
USD 30,000 - 47,000
19 Days Paid Time Off (annual allot.
Company Paid Holidays
2nd Shift hourly positions receive 15%
+10
Night Shift Deburr & Hand Finisher Technician
Night Shift Deburr & Hand Finisher Technician

Triumph Group • Michigan

On-site
USD 42,000 - 64,000
19 Days PTO
Health Insurance
401(k) Match
+1
Title Mill Machinist - Day Shift
Title Mill Machinist - Day Shift

TRIUMPH Mexicali • Michigan

On-site
USD 50,000 - 70,000
19 Days Paid Time Off
Health Insurance starting on your join
401(k) Match (75% up to 6%)
+3
Quality Inspector - Day Shift
Quality Inspector - Day Shift

Triumph Group • Macomb Township (MI)

On-site
USD 42,000 - 65,000
Paid time off
Company holidays
Shift premium (2nd shift)
+7
Machinist 3
Machinist 3

Triumph Group • Redmond (WA)

On-site
USD 45,000 - 63,000
Medical, dental, vision
401(k) with company match
Paid time off
+1