General Mechanic

JM Eagle

Sunnyside (WA)

On-site

USD 52,000 - 76,000

Full time

7 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

JM Eagle in Sunnyside, WA is seeking a General Mechanic to maintain, repair and fabricate equipment used in PE pipe production. You will work with electrical, hydraulic, pneumatic systems and welding, using shop tools and a preventive maintenance program.

This hands-on role requires reading schematics, following safety rules, operating forklifts, drill presses, and hydraulic presses, and collaborating with the team to keep production on track. On-call availability may be required.

Qualifications

  • High school diploma or GED required; related training a plus.
  • Electrical, hydraulic, pneumatic and welding knowledge required, with schematic reading ability.
  • Plastic manufacturing experience preferred.

Responsibilities

  • Operate forklifts to move equipment and materials safely.
  • Maintain, repair, and fabricate components for PE pipe equipment.
  • Inspect parts and replace defective components; perform preventive maintenance.
  • Read and follow safety rules and documentation.

Skills

Electrical knowledge
Hydraulic knowledge
Pneumatic knowledge
Welding knowledge
Schematics reading

Education

High school diploma or GED

Tools

Drill press
Hydraulic press
Cut off saw
Shop tools

Job description

TITLE: General MechanicSUMMARY:Maintain, repair, build, fabricate, and trouble shoot equipment used in the manufacturing of PE pipe products. Works with electricity, hydraulics, welding, machine shop equipment, and pneumatics. Uses a variety of shop tools and hand tools to perform work required. Maintenance of building and other support functions is also a critical aspect of this position. Use UpKeep maintenance program for plant maintenance.ESSENTIAL DUTIES AND RESPONSIBILITIES:Includes the following. Other duties may be assigned.1. Works at following and promoting company safety rules and policies and following accepted safe work practices.2. Safely operate forklifts to move equipment and materials to and from the production areas, scales, warehouse, ect.3. Safely operate the man-lift and observe weight and height limits.4. Observe mechanical devices in operation and listen to their sounds to locate causes of trouble.5. Dismantle devices to gain access to and remove defective parts.6. Examine form and texture of parts to detect imperfections7. Inspect used parts to determine changes in dimensional requirements.8. Adjust functional parts of devices and control instruments.9. Repair or replace defective parts. Install special functional and structural parts in devices. Lubricate and clean parts.10. Replace faulty electrical components of machines such as relays, switches, and motors and position sensing devices.11. Know the proper use of voltage testing equipment.12. Start devices to test their performance.13. Set up and operate drill press, hydraulic press and cut off saw. Use various other hand and shop tools to make repair parts and equipment.14. Fabricate new equipment or modify existing equipment to meet production requirements.15. Possesses essential mechanical skills to be able to trouble shoot equipment malfunctions and to be able to make proper repairs.16. Perform preventive maintenance on extrusion equipment and other related fields as needed.17. Perform minor tune-up and maintenance on fork lifts.18. Know the basic extrusion process and assist the production department in all aspects of PE pipe manufacturing.19. Supply your own hand tools.20. Communicate well with other employees and operators to determine repair problems needed.21. Assist other employees when needed and work successfully in a self-managed work team.22. Be a self-starter and perform duties with little direct supervision.23. Attends required training sessions and wears the required safety equipment such as hearing protection, safety glasses, and other safety equipment that might be required for certain jobs.24. Is willing to learn new tasks and take on individual responsibilities.25. Be willing to be on call.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION and/or EXPERIENCE:High school diploma or general education degree (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. Electrical, hydraulic, pneumatic, and welding knowledge is required, with the ability to read schematics in all related areas.Plastic experience preferred.COMPUTER SKILLS:Experience with computers and basic keyboarding skills.LANGUAGE SKILLS:Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios and percentages. Ability to work with the metric system.REASONING ABILITY:Ability to solve practical problems and deal with a variety of variables in changing situations. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to make accurate and timely decisions in a stressful environment.PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.1. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to walk, reach with hands and arms, and talk and hear.2. The employee is occasionally required to stoop, kneel, crouch, or climb stairs, and to climb ladders and work at heights up to 50 feet.3. The employee must frequently lift and/or move up to 50 pounds.4. Specific vision abilities required by this job include vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee regularly works near moving mechanical and hydraulic equipment. The employee normally works in outside weather conditions and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and vibration.The noise level in the work environment is usually loud.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Extrusion Technician
Extrusion Technician

JM Eagle • Sunnyside (WA)

On-site
USD 25,000 - 36,000
Job Certification Program
On-the-job training
Industrial Maintenance Mechanic B
Industrial Maintenance Mechanic B

JM Eagle Umatilla OR • Oregon

On-site
USD 60,000 - 85,000
Maintenance Mechanic
Maintenance Mechanic

JM Eagle, Inc. • Pueblo West (CO)

On-site
USD 52,000 - 68,000
Production Line Operator
Production Line Operator

JM Eagle Umatilla OR • Oregon

On-site
USD 21,000 - 30,000
Maintenance Mechanic
Maintenance Mechanic

JM Eagle • Fontana (CA)

On-site
USD 37,000 - 47,000
General Maintenance
General Maintenance

Hayes Manufacturing • Pineville (LA)

On-site
USD 40,000 - 55,000
Extrusion Technician C
Extrusion Technician C

JM Eagle • Hastings (NE)

On-site
USD 25,000 - 36,000
Maintenance Mechanic
Maintenance Mechanic

Prysmian • North Las Vegas (NV)

On-site
USD 55,000 - 85,000
Maintenance Technician
Maintenance Technician

Faerch A/S • Portage (IN)

Hybrid
USD 42,000 - 66,000
Extruder Operator
Extruder Operator

JM Eagle • Fontana (CA)

On-site
USD 28,000 - 36,000