Extruder Operator

JM Eagle

Fontana (CA)

On-site

USD 28,000 - 36,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

JM Eagle in Fontana, CA is seeking an Extruder Operator to run extrusion lines for PVC pipe, perform visual inspections, and package products. The role requires operating control panels, measuring pipe specs, and recording line checks while maintaining a clean, safe work area.

Training may be provided for new hires. Responsibilities include assisting with changeovers, basic equipment repairs, and communicating issues to supervisors.

Qualifications

  • HS diploma or equivalent required or 6 months related experience
  • Ability to read and interpret documents such as safety rules and procedures
  • Ability to write routine reports and communicate effectively with all levels of staff
  • Math skills including fractions, percentages, decimals, circumference, and volume

Responsibilities

  • Operate extrusion lines and control panels to produce PVC pipe
  • Perform machine changeovers and calibrations
  • Measure pipe specifications and report issues
  • Record bi-hourly line checks and maintain production documentation
  • Pack finished products and keep work area clean and safe
  • Troubleshoot minor equipment issues and perform basic repairs

Skills

Reading & interpreting documents
Written communication
Oral communication
Mathematical calculations
Problem solving
Attention to detail
Teamwork

Education

High School diploma or equivalent
6 months related experience or training
Equivalent combination of education and experience

Tools

Forklift
Calipers
Micrometers
Power tools

Job description

The Extruder Operator is responsible for operating extrusion lines to manufacture pipe in accordance with established company specifications. This role includes performing production tasks, conducting visual inspections, and packaging finished products to ensure quality standards are consistently met, works rotating shifts.Essential Duties & Responsibilities• Keep equipment and work area clean and orderly in compliance with Total Housekeeping Management (THM) and ISO standards.• Demonstrate the ability to meet all qualification requirements.• Work under the direction of the Supervisor.• Operate extruder machines and control panels used to produce PVC pipe.• Assist with machine changeovers.• Measure pipe specifications and report any issues to the Supervisor and Quality Control.• Identify visual defects in pipe during production.• Accurately calculate and adjust puller speeds as required.• Cut Quality Control testing samples when needed.• Perform minor equipment repairs.• Follow safe work practices and report hazardous conditions.• Train inexperienced employees when required.• Perform all necessary measurements using calipers and micrometers to ensure pipe is within tolerance.• Accurately complete Production Inspection Reports and all supporting documentation.• Record bi‑hourly line checks and notify the Supervisor of any changes.• Operate a forklift to move finished product, boxes, materials, and supplies.• Accurately calculate and make required adjustments to extrusion lines.• Troubleshoot and perform minor equipment repairs.• Record machine conditions and report abnormalities to the Supervisor.• Accurately calculate machine rate and speed.• Clean extruder and cooling tank water filters.• Make and collect Quality Control samples as required.• Perform miscellaneous tasks as assigned.Supervisory Responsibilities: This position has no supervisory responsibilities.Education and ExperienceHigh School diploma or recognized equivalent; OR at least 6 months of related experience and/or training; OR an equivalent combination of education and experience.Computer SkillsNone required.Language SkillsAbility to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports.Ability to communicate effectively with employees at all levels of the organization.Mathematical SkillsAbility to calculate figures and amounts such as fractions, percentages, decimals, circumference, and volume.Ability to apply basic mathematical concepts including addition, subtraction, multiplication, and division.Reasoning AbilityAbility to solve practical problems and work with a variety of concrete variables in situations where limited standardization exists.Ability to interpret instructions furnished in written, oral, diagram, or schedule form.Physical RequirementsThe physical requirements described below represent those that must be met by an employee to successfully perform the essential functions of this position. To perform this job effectively, an individual must be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and abilities necessary for the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Adequate sight, hearing, and use of limbs to safely operate powered vehicles (forklifts, sweepers, cars, pickups).Ability to visually distinguish proper product identification, warning indicators, and operational signals.Ability to hear and differentiate between warning alarms and normal operating sounds.Ability to visually verify accuracy and neatness of assigned job tasks.Ability to stoop, kneel, crouch, and crawl as needed for operating, cleaning, or packaging equipment and products.Ability to maintain balance and body equilibrium when walking, standing, or crouching in all areas, even with limited supervision.Ability to verbally communicate in person or by telephone with coworkers to complete job requirements.Ability to clearly hear and understand verbal communication in person or by telephone.Ability to see and understand written communication.Ability to lift or handle objects safely within the recommended 50‑pound limit, and request assistance when exceeding that weight.Ability to walk through, under, and around equipment with a minimum clearance of 30 inches.Ability to operate telephones and calculators as required.Ability to feel objects, textures, size, shape, and temperature using fingertips.Ability to grasp and safely use manual and powered tools (power saws, drills, hammers, presses, latches, etc.).Adequate sight capability to safely operate machinery and tools at arm’s length.Work EnvironmentThe work environment characteristics described below are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Work may occur in both indoor and outdoor environments.Exposure to extreme cold (below 32°F for more than one hour).Exposure to extreme heat (above 100°F for more than one hour).Exposure to high noise levels requiring raised voice to be heard.Exposure to vibration and fluctuating body movements.Exposure to hazards such as moving machinery, electrical currents, falling debris, chemicals, gases, high heat, or explosives.Exposure to unregulated atmospheric conditions including odors, fumes, gases, poor ventilation, dust, oils, and cutting fluids.JM Eagle is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, creed, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, age, disability, medical condition, genetic information, marital status, military or veteran status, reproductive health decision-making, or any other status protected by applicable federal, state, or local law.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Extruder Operator
Extruder Operator

JM Eagle • Wilton (IA)

On-site
USD 35,000 - 45,000
Extrusion Technician
Extrusion Technician

JM Eagle • Sunnyside (WA)

On-site
USD 25,000 - 36,000
Job Certification Program
On-the-job training
Maintenance Mechanic
Maintenance Mechanic

JM Eagle • Fontana (CA)

On-site
USD 37,000 - 47,000
Maintenance Mechanic - 3rd Shift
Maintenance Mechanic - 3rd Shift

JM Eagle • Visalia (CA)

On-site
USD 40,000 - 60,000
401(k)
401(k) matching
Dental insurance
+5
Maintenance Mechanic - 3rd Shift
Maintenance Mechanic - 3rd Shift

JM Eagle • Visalia (CA)

On-site
USD 39,000 - 54,000
401(k)
401(k) matching
Dental insurance
+5
Extrusion Technician C
Extrusion Technician C

JM Eagle • Hastings (NE)

On-site
USD 25,000 - 36,000
General Mechanic
General Mechanic

JM Eagle • Sunnyside (WA)

On-site
USD 52,000 - 76,000
Machine Operator
Machine Operator

Sanderson Pipe Corporation • Pittsburg (KS)

On-site
USD 30,000 - 45,000
Machine Operator
Machine Operator

Sanderson Pipe • Pittsburg (KS)

On-site
USD 35,000 - 50,000
Production Line Operator
Production Line Operator

JM Eagle Umatilla OR • Oregon

On-site
USD 21,000 - 30,000