Furnace Operator - 3rd

ThermTech - Heat Treating Specialists

Waukesha (WI)

On-site

USD 31,000 - 53,000

Full time

43 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health Insurance
401(k)
Paid Time Off
8 Paid Holidays
Life Insurance
Disability Insurance
Health Savings Account (HSA)
On-site Clinic

Job summary

ThermTech - Heat Treating Specialists in Wisconsin seeks reliable Machine Operators for 3rd shift (10:00 PM – 6:30 AM) at our New Berlin plant. Base pay is $22.60–$38.42/hour, with a 13% shift differential included.

Three positions available; applicants must have a high school diploma and be legally eligible to work in the U.S. Responsibilities include reading production schedules, operating furnaces, testing hardness, inspecting parts, recording times, and mentoring new workers.

Qualifications

  • Requires High school diploma or equivalent.
  • Experience in a manufacturing/heat-treat setting is beneficial.
  • Willingness to work overtime or other shifts.

Responsibilities

  • Read productions schedules and work orders to determine processing sequences and instructions.
  • Record times parts begin and end operations to document completion.
  • Adjust furnace controls per work instructions using thermal instruments and gauges.
  • Test parts for hardness using hardness testing equipment or samples.
  • Verify products meet customer requirements and document issues.
  • Ensure tooling is stored and organized per procedures.
  • Perform quality checks for hardness and critical dimensions.
  • Input part data into internal computer system.
  • Note quality concerns in the nonconformance system.
  • Notify maintenance staff of equipment quality issues.
  • Package parts per customer requirements.
  • Instruct new workers in machine operation.
  • Maintain furnace equipment as needed.

Skills

Read production schedules
Operate machines
Quality inspection
Instruct new workers

Education

High school diploma or equivalent

Tools

Hardness testing equipment
Thermal instruments

Job description

  • Base Pay $22.60 - $38.42 / Hour
  • Job Category Operator, Machine Operation
  • Industry Manufacturing
  • Relocation Expense Covered No
  • Employee Type Non-Exempt
  • Required Degree High school
  • Manage Others No
Contact information
  • Name ThermTech Recruiting
  • Phone 2625491878
  • Email recruiting@thermtech.net
Description

Persons with disabilities who anticipate needed accommodations for any part of the application process may contact Alana Reimer, in confidence ARiemer@ThermTech.net.

Position Location: 3 Positions Available:

16875 W Ryerson Rd. New Berlin, WI 53151

Position Hours: 3rd Shift: 10:00 PM - 6:30 AM Monday - Friday
Position Wage: $22.60 - $38.42 per hour (13% shift differential included)

Salaries are based on a number of factors, including the skills and experience of the candidates. It is common to be hired at the lower to middle end of a salary range and while it is possible to be hired at the higher end, it often requires unique circumstances, such as proven expertise.

Company Benefits:

  • Health Insurance
  • 401(k) - Company matched 50% on the 1st 4%.
  • Paid Time Off - Accrued annually with 80 hours for the first year of service
  • 8 Paid Holidays
  • Basic Life and AD&D Insurance at no cost to employee
  • Optional Voluntary Life Insurance
  • Short-Term and Long-Term Disability Plans at no cost to the employee
  • Health Savings Account (HSA) for employees enrolled in ThermTech's Insurance
    • ThermTech provides the opportunity to earn enough HSA funds to offset the deductible of health insurance when employee and spouse (if applicable) have a yearly physical with ThermTech's On-Site Clinic and participate in the Employee Wellness Program.
  • Employee assistance program: Confidential 24/7 support and short-term counseling
  • Other: On-site Clinic services (On-demand Urgent and Primary Care, Virtual Video Visits, Chiropractic Care, and Health Coaching) available to all employees and their family, at no additional costs, even if they are not covered by ThermTech's health insurance.
  • Discounted Standard Process supplements.
  • Free Uniforms, Safety Equipment, and Employee recognition (PIN) program

For more information, please visit our website: www.thermtech.net

Job Description:

Responsibilities will include working in several different production areas and being adaptable to fulfill the needs of fellow team members. Inspecting equipment throughout the shop and promptly reporting any concerns to the shift foreman will be crucial.

Job Duties & Responsibilities:

  • Read productions schedules and work orders to determine processing sequences and work instructions for customer parts.
  • Record times that parts begin and end operations to document that objects have completed operations(s) and process(es)
  • Adjust controls according to work instructions, using thermal instruments and charts, dials and gauges of furnaces
  • Test parts for hardness, using hardness testing equipment, or by examining samples
  • Verifying products meet customer requirements, identifies nonconformities, communicating & documenting issues
  • Ensure that all tooling is properly stored and organized according to procedures
  • Perform all necessary quality checks for hardness & critical dimensions
  • Input all necessary part data into the internal computer system
  • Note any quality concerns that arise during operation via nonconformance system
  • Notify maintenance staff for any equipment quality issues
  • Package parts according to customer requirements
  • Instruct new workers in machine operation
  • Maintain furnace equipment as needed

The statements herein are intended to describe the general nature and levels of the work performed by employees but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. ThermTech reserves the right to revise or change job duties and responsibilities as the need arises.

  • Applicants must be legally entitled to work in the United States (i.e., a citizen or national of the U.S., a lawful permanent resident, a non-resident, authorized to work in the U.S. without ThermTech sponsorship). ThermTech does not sponsor visas, either at time of hire or at any later time.
  • This position must satisfy ITAR (DSP-5) compliance requirements; therefore, candidates must be a lawful permanent resident [8 U.S.C. 1101(a)(20)] or a protected individual [8 U.S.C. 1324b(a)(3)]. Employment of Foreign Persons(s) [22 CFR 120.63] will be contingent on receiving the DSP-5 license from the US State Department.
  • All hires are contingent upon a 9-panel hair follicle drug test & background check.
  • May be required to obtain and maintain forklift operation certification
  • May be required to work overtime or any shift, including weekends.

Physical & Mental Demands: The following physical and mental demands consist of but are not limited to the following:

  • Must be able to work in a standing position for extended periods in a non-climate controlled industrial environment
  • Ability to bend, pull, stoop, and reach to perform functions.
  • Capable of lifting and carrying at least 25-pound objects throughout shift
  • Must be exposed to heat, fumes, noise, humidity, etc.
  • Must have the cognitive and mental capacity to perform essential job functions.
  • Must demonstrate the ability to read, write, and communicate in the English language.
  • Must demonstrate the ability to perform fundamental mathematical skills and concepts (e.g. addition, subtraction, multiplication, division, fractions, decimals, percentages, and the basics of algebra and geometry).
  • Visual acuity to read documents, computer screens, files, etc.
  • Ability to hear in person and via phone.

Education: High school diploma or equivalent preferred

Experience: Prior factory work or Heat Treating experience preferred

Hard Skills:

  • Basic computer skills
  • Safety-focused mindset

Soft Skills:

  • Time management
  • Organized
  • Self-motivated
  • Able to work collaboratively with others
  • Willingness to learn & take direction

ThermTech does not accept unsolicited resumes from staffing agencies, headhunters, recruiters, and/or placement agencies. Please do not directly contact our executives or managers via email or phone or by other means. Your correspondence will not be returned. All communications of this nature should be directed to Careers@ThermTech.net.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Furnace Operator - 1st
Furnace Operator - 1st

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 28,000 - 47,000
Health Insurance
401(k)
Paid Time Off
+9
Furnace Operator - 12 Hour Shifts Friday - Sunday 3rd
Furnace Operator - 12 Hour Shifts Friday - Sunday 3rd

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 39,000 - 66,000
Health Insurance
401(k)
Paid Time Off
+5
Furnace Operator 2nd Shift
Furnace Operator 2nd Shift

ThermTech - Heat Treating Specialists • New Berlin (WI)

On-site
USD 32,235 - 54,814
Health Insurance
Dental Insurance
401(k) - Company matched 50% on the 1st 4%
+6
Furnace Operator 12 Hours Shifts Friday Sunday 3rd shift
Furnace Operator 12 Hours Shifts Friday Sunday 3rd shift

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 43,000 - 52,000
Health Insurance
Dental Insurance
401(k)
+11
Furnace Operator 12 Hours Shifts Friday Sunday 1st shift
Furnace Operator 12 Hours Shifts Friday Sunday 1st shift

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 29,000 - 42,000
Health Insurance
Dental Insurance
401(k) - Company matched 50% on the 1^
+6
Finishing Operator - 1st
Finishing Operator - 1st

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 25,000 - 35,000
Health Insurance
401(k)
Paid Time Off
+5
Inspection Operator - 1st
Inspection Operator - 1st

ThermTech - Heat Treating Specialists • New Berlin (WI)

On-site
USD 28,000 - 39,000
Health Insurance
401(k) matching 50%
Paid Time Off
Furnace Operator 12 Hours Shifts Wednesday Saturday 1st shift
Furnace Operator 12 Hours Shifts Wednesday Saturday 1st shift

ThermTech - Heat Treating Specialists • Waukesha (WI)

On-site
USD 28,000 - 47,000
Health Insurance
Dental Insurance
401(k)
+13
Manufacturing Resource Manager
Manufacturing Resource Manager

ThermTech - Heat Treating Specialists • New Berlin (WI), Waukesha (WI), Village of Waukesha (WI)

On-site
USD 90,000 - 110,000
Health Insurance
Dental Insurance
401(k) - Company matched 50% on the 1s
+7
Blast Operator 3rd Shift
Blast Operator 3rd Shift

ThermTech - Heat Treating Specialists • New Berlin (WI)

On-site
USD 25,000 - 36,000
Health Insurance
Dental Insurance
401(k) - Company matched 50% on the 1s
+9