Finishing Team Lead

Composite Factory; Mooresville (NC); On-site; USD 65,000 - 90,000; Full time

Benefits offered by this job

Medical, Dental, Vision

401(k) matching

Paid time off (PTO)

Employee referral program

Shift differential

Potential quarterly bonuses

Discounts on select services/products

Climate-controlled work environment

Job summary

Composite Factory is seeking a Finishing Team Lead in Mooresville, NC to support the Project Lead by guiding a small finishing team. The role emphasizes training, process coordination, and achieving production goals while upholding safety, quality, and a respectful work environment.

Key duties include coaching team members, rolling out new parts, managing material inventory, and ensuring SOPs are followed. This is a full-time, on-site position with competitive benefits.

Qualifications

• Minimum of high school diploma or GED
• Must be able to pass respirator fit testing and stay clean-shaven per OSHA standards
• Must wear tight-fitted respirator during shift
• Complete annual respirator fit testing and medical evaluations
• Excellent communication and teamwork skills
• Proven ability to work under pressure and meet deadlines
• Highly organized with strong task prioritization
• Ability to lift/carry up to 50 pounds

Responsibilities

• Assist Project Lead with rolling out new parts and training new team members
• Coach and supervise team members to ensure project success
• Facilitate daily operational processes and team coordination
• Support project lead with material inventory control and waste reduction
• Monitor material usage and report scrap/waste per procedures
• Ensure adherence to SOPs and finishing best practices
• Maintain accurate documentation (checklists, ply books)
• Reinforce compliance with procedures and report discrepancies
• Assist with controlling and reviewing part quality throughout production
• Notify project lead of COPQ concerns
• Support and coach team members through quality issues
• Promote a clean and organized workspace and maintain PPE compliance
• Report improper behavior to Finishing Leads
• Contribute to a positive work environment
• Participate in performance evaluations and provide improvement suggestions
• Adhere to safety, health, and environmental policies
• Support continuous improvement efforts
• Perform other duties as assigned

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Finishing Team Lead

Full Time Management Mooresville, NC, US

4 days ago Requisition ID: 1625

Why Composite Factory?

Originally established as Fibreworks Composites in 2009 by Guenther Steiner and Joe Hofmann, we grew to become the largest privately-owned composite manufacturer in the U.S. In 2019, we launched Composite Factory, an AS9100 / ISO-certified sister company serving the Aerospace, Aero Structures, Aviation, Defense, and Medical industries—sectors that demand the highest levels of traceability, certification, and quality. Now fully operating under the Composite Factory name, we have united our teams, experience, and capabilities under one brand.

Rooted in motorsports, we are fully vertically integrated, bringing engineering, machining, tool-making, and production under one roof to deliver advanced Composite Structures with speed, precision, and unmatched quality. Join a team pushing the boundaries of advanced composites and building the future of the industry!

Position Overview

The Finishing Team Lead supports the Project Lead in overseeing a small, dedicated team within the Finishing Department. This role is responsible for organizing, coordinating, and maintaining production activities related to specific projects. The Finishing Team Lead ensures team members are properly trained, processes are followed, and production goals are met while maintaining quality, safety, and a respectful work environment.

Key Responsibilities

• Assist Project Lead with rolling out new parts and training new team members.
• Coach and supervise team members to ensure project success.
• Facilitate daily operational processes and team coordination.
• Support Project Lead with material inventory control and waste reduction.
• Monitor material usage and report scrap/waste in accordance with procedures.
• Ensure adherence to Finishing Best Practices and Standard Operating Procedures (SOPs).
• Maintain accurate and complete documentation (e.g., checklists, ply books).
• Reinforce compliance with procedures and report any discrepancies.
• Assist with controlling and reviewing part quality throughout production.
• Notify Project Lead of Cost of Poor-Quality (COPQ) concerns.
• Support and coach team members through quality-related issues.
• Promote and maintain a clean and organized workspace.
• Reinforce cleaning procedures and workplace standards.
• Contribute to a respectful and positive work environment.
• Report any improper behavior or conduct to Finishing Leads.
• Ensure team members are wearing required Personal Protective Equipment (PPE).
• Address PPE violations and elevate as needed.
• Provide input on employee performance evaluations.
• Offer suggestions for improving operational efficiency.
• Adhere to all safety, health, and environmental policies.
• Report safety risks and contribute to continuous improvement efforts.
• Perform all other duties as assigned.

What You Will Bring to the Team

• High school diploma, General Educational Development (GED), or equivalent required.
• Must be able to pass required respirator fit testing and remain clean-shaven in areas where a tight-fitted respirator seals to the face, in accordance with OSHA standards.
• Must be able to wear a tight-fitted respirator for the duration of the assigned shift, as required by the position.
• Successfully complete all applicable respiratory protection requirements, including a medical evaluation and respirator fit testing.
• Complete annual fit testing, with additional medical evaluations as required.
• Minimum of three (3) years of experience in composites lamination.
• Proficient in Microsoft Office applications, including Excel, Word, and Outlook.
• Strong verbal and written communication skills.
• Positive, team-oriented attitude with a proactive approach to problem-solving.
• Consistent and reliable attendance record.
• Demonstrates a commitment to fostering a positive and respectful work environment.
• Effective interpersonal skills; collaborates well across teams and departments.
• Adaptable to changing work environments, priorities, and production schedules.
• Able to perform under pressure, meet deadlines, and contribute to team success.
• Highly organized with the ability to prioritize tasks and respond promptly.
• Ability to lift/carry up to 50 pounds and work in various physical conditions.
• Must be a U.S. Citizen or lawful Permanent Resident in compliance with ITAR regulations.

Our Investment in You

• Comprehensive medical, dental, vision, and life insurance benefits.
• 401(k) matching after 6 months tenure
• Paid time off (PTO) for vacation and sick days
• Employee referral program
• Shift differential for 2 nd shift employees
• Potential to earn quarterly discretionary bonuses based on company performance
• Discounts on select services/products
• Climate-controlled work environment

Hours of Operation

7:00 AM – 4:00 PM; Monday through Friday, with occasional weekends, overtime, and holidays as scheduled by leadership. This position is required to work on-site during scheduled business hours. Any exceptions for remote or work-from-home arrangements must be reviewed and approved in advance by the employee’s manager.

Work Environment & Physical Requirements

Depending on the position and assigned duties, working conditions and physical requirements may include, but are not limited to:

• Prolonged periods of standing, walking, or sitting
• Climbing, balancing, bending, reaching, handling, stooping, kneeling, crouching, pushing, or pulling
• Lifting, carrying, pushing, or moving materials, products, tools, or equipment
• Using computers, machinery, material-handling equipment, hand tools, power tools, or other job-related equipment
• Performing work that requires hand‑eye coordination, manual dexterity, and the handling of small parts or components
• Working around moving mechanical equipment and in areas with varying noise levels, temperatures, fumes, airborne particles, dust, chemicals, or other manufacturing-related conditions
• Wearing required personal protective equipment, which may include safety glasses, hearing protection, gloves, protective footwear, respirators, or other designated PPE
• Using close, distance, peripheral, and depth vision, color recognition, and the ability to adjust focus when required by the position

The specific work environment and physical requirements will depend on the essential functions of the position. Employees must be able to perform the essential functions of the job, with or without reasonable accommodation.

Equal Employment Opportunity

Composite Factory is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability, genetic information, protected veteran status, or any other characteristic protected by applicable law.