Finishing Operator Assistant | Monday - Friday

Shawfloorscareers; Dalton (GA); On-site; USD 17,000 - 22,000; Full time

Job summary

Shaw Industries in Dalton, GA seeks a dependable Finishing Operator Assistant to support latex application and line operations on the 3pm–11pm shift. You will assist the coater and froth operators and help maintain quality throughout the process.

This role requires following safety rules, logging cupweight and viscosity checks, and helping with precoat duties and weight checks as directed. Training lasts three weeks.

Responsibilities

• Maintain correct latex application and monitor coating quality on the line.
• Assist coater operator and froth operator during breaks and absences.
• Relieve coater/froth operators and perform their duties as required.
• Conduct secondary weight checks and record results per shift.
• Operate Latex Control System and assist with setup for each style change.
• Log cupweight and viscosity checks four times per shift and per supervisor request.

Job description

Shaw Plant 4, 2225 S Hamilton Street Extension, Dalton, GA 30721 USA

Full time

R-157933

Job Title

Finishing Operator Assistant | Monday - Friday

Position Overview

This position is Monday- Friday 3pm-11pm.

POSITION OBJECTIVE:

Maintain correct and steady application of latex onto carpet, provide assistance to coater operator and froth operator.

ESSENTIAL DUTIES:

I. Latex Application

A. Ensure carpet is feeding correctly into precoat direct applicator and Tillotson adhesive applicator, making sure to fix and report folded carpet to Coater Operator and Sew-on Operator.

B. Identify style to be run using Sew-In Tracker screen.

C. Reference spec sheet to identify correct application settings for the given style.

1. Application (precoat and adhesive)

2. Cupweight

3. Puddle height (precoat and adhesive)

4. Gap

D. Enter correct settings into Latex Control System.

E. Manually check gap with gages and adjust system if necessary.

F. Visually inspect latex application and troubleshoot using Latex Control System as necessary. Notify supervisors of issues.

G. Make sure end dams are set up correctly and latex is not getting on carpet selvage. Adjust end dams as necessary.

H. Perform all previous steps again for each style change.

I. Manually check cupweight and viscosity 4 times per shift and log in notebook. Also do this for any backing or weight check requested by supervisor.

J. Work with department management to improve Latex Control System and latex application process.

II. Maintain Precoat Area

A. Ensure proper operation of pre-coat pumps and blenders.

B. Make sure soap, water, latex tank levels are sufficiently high.

C. Clean out precoat filter baskets twice per week.

D. Report any issues to supervisor.

III. Perform Coater Operator Duties

A. The assistant operator must relieve the coater operator for breaks and absenteeism.

B. The assistant operator will be held responsible for all duties of the coater operator during this time.

IV. Perform Froth Operator Duties

A. The assistant operator must relieve the froth operator for breaks and slack time (when froth operator is changing out secondary backing).

B. The assistant operator will be held responsible for all duties of the froth operator during this time.

V. Conduct Secondary Application Weight Checks

A. Conduct check at direction of supervisor.

B. Place 3 two-part paper forms on secondary (after application) as secondary rises to the marriage roller.

C. Place 3 2-part paper forms on

1. Alley side

2. Center

3. Wall side

VI. Attendance Policy

A. Must adhere to the Corporate Attendance Policy

B. Must notify the previous shift supervisor of an imminent absence 1 to 2 hours before shift change

C. Must speak personally with supervisor detailing the reason for absence

VII. Work Schedule

A. Must work all scheduled work hours for your shift

B. Must be able to work weekends

C. Must be able to work 12-hour shifts

D. Must be able to work holidays as necessary

NON-ESSENTIAL DUTIES:

I. Daily Clean-Up

A. Maintain a clean work area at all times. All areas should be picked up, swept up, or blown down at every opportunity.

B. All equipment should be properly stored when not in use.

C. Keep grease and oil off the floor.

II. Painting

A. Clean and paint all areas assigned during downtime.

PHYSICAL REQUIREMENTS:

Must be able to:

• Withstand temperatures of 100 degrees
• Stand for long periods of time

OTHER REQUIREMENTS:

Must be able to:

• Read and write legibly
• Operate Latex Control System
• Operate Coater Console
• Operate Shopflex / Sew-In Tracker
• Operate wings control
• Keep downtime report
• Communicate clearly via 2-way radio

TRAINING REQUIREMENTS:

• 3 weeks on-the-job training

TOOL, EQUIPMENT, MATERIAL REQUIREMENTS

• Utility knife
• Putty scraper
• Scale
• Viscometer

SAFETY & SECURITY REQUIREMENTS

• Kronos badge
• Safety glasses
• Ear plugs
• Cut-resistant gloves

Work Shift

8 Hr non-rotating shift, Hrs fall to in punch day, Observed Calendar, shift starts PM

Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.

A history of success, a future of possibility

Founded in 1967, Shaw Industries' leadership has been built on a history of success. Over time, our products have expanded, the customers we serve have been broadened, and the technology we use has advanced, but our vision to create a better future remains the same. Exceeding our customers' expectations for quality, service and performance is at the heart of our business.

Global Flooring Provider

Shaw Industries Group Inc. supplies carpet, resilient, hardwood, tile and stone, synthetic turf, and other specialty products to residential and commercial markets worldwide.

Learn more (https://shawinc.com/Company-Profile)

Operational Excellence

Our manufacturing operations and integrated supply chain deliver a broad array of products to meet diverse needs across residential and commercial markets throughout the world.

Learn more (https://shawinc.com/Our-Operations/Manufacturing)

Award Winning

The success of our company and the success of our associates go hand-in-hand. We are consistently awarded as an employer of choice, community partner, and leader in design and innovation.

Learn more (https://shawinc.com/Company-Profile/Awards)

We Sustain Human Ability

At Shaw, sustainability means sustaining human ability in all of our products and processes. We ask ourselves "how can we minimize our impact on the environment and maximize human potential?"

Learn More (https://shawinc.com/Our-Impact/Sustainability)

Community Partner

From civic involvement and philanthropic giving to volunteerism and future workforce development, our company and associates leverage our combined passions and expertise in addressing community needs, collaboratively.

Learn More (https://shawinc.com/Our-Impact/Community-%281%29)

In The News

There is always something new and exciting happening at Shaw. Check out our news page to read our recent press releases, company blog posts, sustainability reports and more!

Learn More (https://shawinc.com/Newsroom)