Field Safety Coordinator

BCSP

Nashville (TN)

On-site

USD 65,000 - 90,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Bonus eligibility
PTO
Full benefits package

Job summary

GS Steel is seeking a Field Safety Coordinator to bolster safety on remote and multi-site projects, traveling to active jobsites and coordinating from the home office as needed. You will reinforce safety standards, support compliance, and help field leaders reduce risk before work begins.

The ideal candidate has 3–5 years in construction safety or risk-focused roles, strong communication, and the ability to build trust in the field while enforcing standards.

Qualifications

  • 3 to 5 years of experience in the construction field.
  • Strong preference for experience in a safety, compliance, or risk-focused role.
  • Working knowledge of jobsite safety standards, regulatory compliance, and construction site operations.
  • Ability to build trust and credibility with field leaders and crews.
  • Strong communication skills with the ability to coach, document, and enforce standards professionally.
  • Ability to interpret data, identify trends, and support root cause analysis.
  • Ability to contribute to pre-job planning and risk mitigation efforts.
  • Valid driver’s license and ability to travel regularly.

Responsibilities

  • Conduct weekly safety audits and field observations at assigned jobsites.
  • Inspect PPE use, fall protection, housekeeping, access and egress, rigging practices, equipment condition, work planning, and task execution against GS Steel and regulatory expectations.
  • Document audit findings clearly, including photos, severity, responsible party, and expected resolution timeline.
  • Maintain a running audit log by project and track repeat findings, closure rates, and improvement trends over time.
  • Follow up on identified deficiencies to verify corrective action has occurred.
  • Partner with Superintendents and site leaders to address concerns promptly and constructively.
  • Escalate unresolved or high-risk items immediately through the proper chain of command.

Skills

Construction experience
Safety/compliance experience
Safety standards
Stakeholder trust
Communication
Data interpretation
Pre-job planning
Driver's license & travel

Job description

Field Safety Coordinator Profile
Reports To:

Director of Safety and Risk Management

Position Summary

The Field Safety Coordinator supports GS Steel’s field operations by serving as a visible, trusted, and proactive safety presence across assigned jobsites, with particular emphasis on remote and travel-based project work. Reporting to the Director of Safety and Risk Management, this role is primarily field-based and requires regular travel to active jobsites, with periodic time spent at the home office for coordination, reporting, planning, and administrative follow-through.

This position plays a key role in reinforcing GS Steel’s safety standards, supporting compliance across projects, identifying and addressing jobsite risk, and helping field leaders maintain safe and disciplined execution. The Field Safety Coordinator partners closely with Superintendents, Project Managers, and field teams to conduct audits, support compliance enforcement, analyze safety trends, contribute to root cause analysis, and assist with project planning to reduce risk before work begins.

The ideal candidate brings 3 to 5 years of experience in the construction field, with strong preference for experience in a safety, compliance, or risk-focused role. This individual must be able to build trust in the field while also holding firm on standards, interpret data and patterns that inform safer operations, and contribute practical insight to both incident prevention and corrective action. Success in this role requires strong communication, sound judgment, credibility with field teams, and the ability to move confidently through active jobsites.

Compensation and Benefits
  • Bonus Eligibility: Eligible for annual bonus consideration
  • Benefits: PTO and full benefits package
Work Environment and Travel Expectations

This role is primarily field-based and requires regular travel to active jobsites, including remote assignments as business needs require. The Field Safety Coordinator must be comfortable working outdoors in changing site conditions, walking uneven terrain, climbing stairs or ladders as appropriate, and moving safely through active construction environments.

Role Purpose

The Field Safety Coordinator exists to strengthen safety execution at the jobsite level by increasing visibility, consistency, compliance, and follow-through across remote and field-based operations. This role supports the execution of GS Steel’s safety program in the field and helps ensure hazards are identified early, corrective actions are completed, documentation is current, and risk is actively addressed before it becomes incident, delay, or liability.

Key Result Areas
1. Job Site Audits and Safety Observations

What winning looks like: Assigned jobsites are regularly inspected, hazards are identified early, findings are documented clearly, and corrective actions are followed through in a timely manner. The Field Safety Coordinator becomes a visible and trusted field presence who helps ensure standards are not just defined, but consistently practiced.

  • Conduct scheduled weekly safety audits and informal field observations across assigned jobsites.
  • Inspect PPE use, fall protection, housekeeping, access and egress, rigging practices, equipment condition, work planning, and task execution against GS Steel and regulatory expectations.
  • Document audit findings clearly, including photos, severity, responsible party, and expected resolution timeline.
  • Maintain a running audit log by project and track repeat findings, closure rates, and improvement trends over time.
  • Follow up on identified deficiencies to verify corrective action has occurred.
  • Partner with Superintendents and site leaders to address concerns promptly and constructively.
  • Escalate unresolved or high-risk items immediately through the proper chain of command.
2. Compliance Management and Regulatory Readiness

What winning looks like: Assigned sites remain compliant with internal standards and applicable local, state, federal, customer, and site-specific safety requirements.

  • Stay current on relevant OSHA requirements, customer standards, and project-specific safety expectations.
  • Review project safety requirements before mobilization and confirm the site is prepared to meet them.
  • Verify that required postings, permits, training records, inspections, certifications, and site safety documentation are current and accessible.
  • Track compliance metrics, recurring deficiencies, and corrective action status for management review.
  • Partner with the Director of Safety and Risk Management and field leadership to close documentation or execution gaps before they become audit findings, incidents, or client concerns.
3. Safety Training, Orientation, and Daily Reinforcement

What winning looks like: Employees at assigned jobsites understand the safety expectations for their work, receive timely and relevant training, and are reinforced through consistent field coaching and practical jobsite communication. Safety is experienced as a daily operating habit, not just a formal requirement.

  • Coordinate and support safety orientation for new hires, transferred employees, and project-specific onboarding needs.
  • Organize recurring safety training sessions for assigned teams and locations.
  • Create or adapt safety briefing materials based on jobsite conditions, recent incidents, upcoming work, and task-specific hazards.
  • Support toolbox talks, pre-task planning conversations, and brief field coaching moments that connect safety expectations to current work.
  • Assess training effectiveness through observation, employee feedback, supervisor input, and incident trends.
  • Coordinate with field supervision to identify knowledge gaps and address them early.
4. Risk Assessment and Mitigation Planning

What winning looks like: High-risk work is identified before execution, exposure is reduced through proper planning, and safety controls are embedded into the work plan rather than added after the fact. The Field Safety Coordinator helps teams think ahead, not just react.

  • Conduct site and task-level risk assessments before work begins on new projects, new phases, or higher-risk activities.
  • Participate in pre-job planning and startup conversations for remote or high-exposure work.
  • Identify key risks related to fall protection, rigging, lifts, access, sequencing, environmental conditions, equipment, site logistics, and trade coordination.
  • Partner with Project Managers, Superintendents, and field leaders to develop practical mitigation plans tied to actual site conditions.
  • Recommend controls, protective measures, and sequencing changes that reduce risk while preserving execution quality.
  • Review incident trends, near misses, and repeat findings to strengthen future planning.
5. Incident Response, Investigation Support, and Corrective Action

What winning looks like: Incidents, near misses, and serious safety concerns are responded to quickly, documented accurately, escalated appropriately, and followed through to root cause and corrective action. Lessons learned are used to improve future performance.

  • Respond promptly to incidents, near misses, injuries, and significant unsafe conditions at assigned sites.
  • Help secure the scene, gather facts, document observations, and support timely internal communication.
  • Assist with incident investigations, witness follow-up, documentation collection, and corrective action tracking.
  • Help ensure corrective actions are clearly assigned, tracked, and verified to closure.
  • Share key learnings with the Director of Safety and Risk Management and field leadership to prevent recurrence.
  • Identify whether an issue reflects a one-time event, a training gap, a leadership gap, or a repeated systems problem.
6. Safety Documentation and Site Readiness

What winning looks like: Every assigned remote site has complete, current, and organized safety records that support execution, client confidence, audit readiness, and regulatory compliance. Documentation is treated as part of safety performance, not separate from it.

  • Maintain organized site-level safety files including site-specific plans, orientations, inspections, permits, training records, SDS access, equipment checks, and required compliance documentation.
  • Verify that documentation aligns with actual site conditions and current work activities.
  • Support accurate and timely completion of inspection forms, audit records, briefing logs, and other field safety documents.
  • Coordinate with the home office and safety leadership as needed to ensure central records remain current.
  • Help standardize site documentation practices across remote jobs where consistency can be harder to maintain.
7. Field Partnership, Coaching, and Safety Culture Reinforcement

What winning looks like: The Field Safety Coordinator is seen as a credible field partner who builds trust, reinforces standards, and helps crews and supervisors make safer decisions in real time. The role strengthens accountability without becoming passive, punitive, or disconnected from field reality.

  • Build strong working relationships with Superintendents, Foremen, Project Managers, and field crews.
  • Coach field leaders on safe execution, hazard awareness, and how to intervene early when conditions change.
  • Model calm, direct, and professional communication when addressing unsafe behavior or risky shortcuts.
  • Reinforce the expectation that safety concerns should be raised even when doing so may affect pace or convenience.
  • Support a field culture where standards are visible, consistent, and owned by leadership at every level.
  • Identify patterns where accountability is weak, expectations are unclear, or risk is being normalized and elevate accordingly.
8. Reporting, Metrics, and Continuous Improvement

What winning looks like: Leadership has clear visibility into site-level safety conditions, trends, open issues, and areas needing intervention. The Field Safety Coordinator helps convert field activity into actionable management information.

  • Track and report on assigned leading and lagging indicators such as audit completion, open findings, repeat issues, training completion, near misses, and incident trends.
  • Provide timely weekly updates to the Director of Safety and Risk Management on site conditions, concerns, and priorities.
  • Identify recurring themes across remote sites and recommend practical improvements to training, planning, communication, or site controls.
  • Use data from audits, incidents, and field observations to support better decisions and stronger consistency across projects.
  • Maintain disciplined reporting habits that support GS Steel’s broader operating rhythm and accountability expectations.
Required Qualifications
  • 3 to 5 years of experience in the construction field.
  • Strong preference for experience in a safety, compliance, or risk-focused role.
  • Working knowledge of jobsite safety standards, regulatory compliance, and construction site operations.
  • Ability to build trust and credibility with field leaders and crews.
  • Strong communication skills with the ability to coach, document, and enforce standards professionally.
  • Ability to interpret data, identify trends, and support root cause analysis.
  • Ability to contribute to pre-job planning and risk mitigation efforts.
  • Valid driver’s license and ability to travel regularly.
Preferred Qualifications
  • Experience supporting remote or multi‑site field operations.
  • Experience participating in incident investigations and corrective action follow-through.
  • Experience using digital checklists, reporting tools, or mobile field documentation platforms.
  • Experience in structural steel, construction operations, or industrial field environments preferred.
Physical Demands
  • Ability to move safely and confidently throughout active construction sites.
  • Ability to stand, walk, climb, bend, and navigate uneven terrain throughout the workday.
  • Ability to lift and carry objects up to 50 pounds.
  • Ability to work outdoors in varying weather and field conditions.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Safety Manager
Safety Manager

Span Construction & Engineering, Inc. • Madera (CA)

On-site
USD 80,000 - 110,000
Safety Manager
Safety Manager

Span Construction & Engineering, Inc. • Lebanon (IN)

On-site
USD 90,000 - 120,000
Field Safety Manager
Field Safety Manager

Schuff Steel • Cut and Shoot (TX)

On-site
USD 70,000 - 110,000
Safety Coordinator
Safety Coordinator

Instrata • Spartanburg (SC)

On-site
USD 50,000 - 70,000
Safety Coordinator
Safety Coordinator

Instrata Technologies, LLC. • Spartanburg (SC)

On-site
USD 60,000 - 80,000
Safety Coordinator
Safety Coordinator

Instrata Technologies, LLC. • Richmond (VA)

On-site
USD 60,000 - 90,000
Construction Safety Field Lead
Construction Safety Field Lead

Haydon • Texas

On-site
USD 70,000 - 110,000
Safety Team Lead
Safety Team Lead

Acco Engineered Systems • Columbus (OH)

On-site
USD 90,000 - 120,000
Field Safety Champion - Travel Sites
Field Safety Champion - Travel Sites

BCSP • Nashville (TN)

On-site
USD 65,000 - 90,000
Bonus eligibility
PTO
Full benefits package
Site Safety Manager
Site Safety Manager

Instrata Technologies, LLC. • Richmond (VA)

On-site
USD 90,000 - 130,000