Fairhope Aero - Aircraft Component Tech

Segers Aero Corporation; Fairhope (AL); On-site; USD 24,796 - 44,083; Full time

Job summary

Segers Aero Corporation in Fairhope, AL, is seeking an Aircraft Component Tech to support maintenance, inspection and repair of components per FAA guidelines. The role requires reading overhaul manuals, proper use of tooling, and accurate documentation throughout each work order.

You will perform bench tests, verify parts, and ensure a clean, safe workspace. The position emphasizes adherence to safety, quality, and company procedures in a busy MRO environment.

Qualifications

• High School Diploma or GED required.
• A&P license or FAA Power Plant Rating preferred.
• Must pass background check and DOT-FAA drug screen.

Responsibilities

• Perform aircraft component maintenance, inspection, testing, troubleshooting and repair activities as assigned by shop leadership in accordance with approved data and FAA requirements.
• Log into ETS using the correct operation code and review work scope per Sales instructions.
• Review and interpret overhaul manuals to diagnose defects and follow correct engine work scope.
• Inspect units for damage, verify part numbers and ensure proper documentation.
• Bench test units to confirm reports and complete final calibrations as required.
• Maintain a clean, safe workstation and observe all safety practices and PPE requirements.

Skills

Toolbox maintenance

Hand tools use

Team collaboration

Independent worker

English literacy

GSE knowledge

Education

High School diploma

A&P license preferred

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Craft Worker Fairhope, AL, US

Salary Range: $18.00 To $32.00 Hourly

Fairhope Aero located in Fairhope, AL is hiring an Aircraft Component Tech to join our team.

Purpose of Position:

To assist in the performance of various aircraft component maintenance/inspection related tasks and duties as delegated by the shop leadership team.

Essential Functions:

(must be able to perform these functions, with or without a reasonable accommodation).

• Perform aircraft component maintenance, inspection, testing, troubleshooting and repair activities as assigned by shop leadership in accordance with approved technical data, company procedure and FAA requirements.
• Acquires information from production boards, reports and any other additional information given by supervisor and/or lead for daily/weekly production goals
• Locates the accessory work order from the assigned production rack
• Properly logs into ETS using the correct operation code
• Reviews the work scope as directed by Sales upon induction
• Locates the correct manual and tooling equipment to complete evaluation
• Reviews and interprets the overhaul manual (OHM) to accurately diagnose the defect listed identified by Sales or adhere to the correct engine work scope and/or customer SOP
• Completes preliminary inspection: Inspect unit for any incoming damages or numerical errors (part/serial numbers, descriptions, status etc.) as well as missing or incorrect parts received. Inform lead of any discrepancies found.
• Bench test unit as applicable to confirm report from Sales/Customer.
• Properly disassembles the until according to the overhaul manual; using the correct tooling equipment required and following any standard aviation procedures/practices
• Visually inspects piece parts for any defects listed by the overhaul manual and/or any aviation standard practice
• Measures any item indicated by the inspection section using micrometers, calipers and/or any other approved measuring equipment
• Assigns the correct routing for any rework item by completing the required IW in accordance with the company standards
• Accurately logs inspection report into company specific software and completes the unit’s evaluation
• Completes any final calibrations/testing required per the overhaul manual with the Accessory Shop Quality Inspector, as required.
• Ensures that all piece parts, tags and paperwork are properly identified and completed for Final Inspection
• Properly preserves the unit in accordance with the overhaul manual or standard aviation practices as required.
• Ensures units are properly mounted on shipping boards if required
• Ensures caps, plugs, covers, and tags (e.g. WARNING and CAUTION tags) are properly installed before shipping
• Maintains a clean workstation free from Foreign Object and/or Debris (FOD), ensures tooling is properly stored
• Maintains a clean/safe workspace free from spills or obstruction which may lead to harm
• Confers with lead/supervisor to recommend changes such as: equipment utilization, production methods and procedures to increase efficiency of department and promote improvement
• Attends all safety and health training, as required, in a timely manner
• Works when scheduled and complies with company attendance policy
• Works overtime as needed
• Other duties as required
• Observes and practices all safety procedures and personal policies (e.g. Safety-glasses, ear plugs, face shields etc.)

Skills, Knowledge and Abilities:

• Must provide and maintain toolbox in accordance with Fairhope Aero guidelines.
• Must be proficient in using a variety of hand tools, special tools, and GSE required to perform assigned maintenance tasks
• Must be able to maintain an effective working relationship with, and among co-workers and supervisors
• Must be able to work with little or no supervision and to take initiative
• Must be able to use applied knowledge to formulate positive solutions to problem situations
• Must be able to apply common sense
• Must be able to effectively read, write and communicate in English
• Must be proficient in company specific software
• Must be able to add, subtract, multiply and divide, using fractions and decimals; compute percentages, ratios, rates and interpret graphs
• Must be able to comply with OSHA requirements and standards to properly wear all applicable PPE
• Must have knowledge of precision measuring tools/equipment (dimensional and electrical)
• Must be able to lift and carry up to 50 lbs. regularly and more, with assistance occasionally
• Must regularly be able to reach overhead
• Must regularly be able to squat, bend, twist, stoop, kneel, and stand
• Must be able to walk around regularly using steps occasionally
• Must be able to see within normal range of vision with or without corrective lenses
• Must be able to hear running machinery
• Must be able to use hands, wrists, and fingers repetitively
• Must have exceptional hand-eye coordination
• Ability to provide verifications of US citizenship or permanent residency to satisfy ITAR/EAR restrictions

Marginal Functions:

• Other duties as assigned

Experience and Education Requirements:

• At least 18 years of age or older
• High School Diploma or GED required.
• One (1) year of mechanical experience including troubleshooting aircraft, automotive and/or industrial engines/equipment or completion of Aviation School required.
• One (1) year of experience in disassembly, assembly, maintenance, repair or overhaul of various components in an MRO environment preferred.
• A&P license or FAA Power Plant Rating preferred.
• Must pass a criminal background check and DOT-FAA pre-employment drug screen. Position is considered safety-sensitive in accordance with DOT and FAA regulations.
• Subject to drug and alcohol testing per DOT FAA’s regulations.

Segers Aero Corporation is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.