FAI Quality Inspector

C/A Design Inc.; Exeter (NH); On-site; USD 60,000 - 85,000; Full time

Benefits offered by this job

Medical insurance

Paid Time Off

Sick Time

Parental Leave

401(k) match

Education reimbursement

Relocation assistance

Climate-controlled facility

On-site break areas

Coffee and refreshments

Job summary

Heico seeks a Quality Control Inspector II to independently inspect machined and brazed aluminum components used in Aerospace and Defense applications, focusing on First Article Inspection (FAI). The role requires blueprint interpretation, GD&T application, and precision measuring equipment, with supervision minimal and reporting to the Director of Quality.

The position emphasizes hands-on inspection of materials, components, and assemblies, adherence to AS9102, and collaboration with QA on

Qualifications

• High School Diploma or GED required.
• 2-5 years of quality inspection experience in a manufacturing or machine shop environment.
• Strong GD&T knowledge and AS9102 familiarity.
• Proficient with precision measuring instruments.
• Experience performing FAI and AS9102 documentation.

Responsibilities

• Perform visual, mechanical, dimensional, and functional inspection of materials, components, and assemblies to ensure specifications.
• Interpret mechanical drawings using ASME Y14.5M dimensioning and tolerancing standards.
• Use precision measuring equipment, including micrometers, calipers, comparators, dial indicators, fixtures, gauges, surface plate setups, and CMMs as applicable.
• Perform First Article Inspections (FAI) in accordance with AS9102 requirements, including creation, verification, and documentation of all required forms and objective evidence.
• Identify workmanship or material defects and initiate Non-Conforming Material Reports (NCMR).
• Assist Quality Engineers in investigating nonconformances and supporting CAPA activities.
• Complete and maintain accurate inspection documentation and records.
• Learn the basics of C/A Design manufacturing processes to be able to provide analysis support for quality specifications and quality problems by addressing inspection-related issues.
• Ensure inspection equipment is properly calibrated and maintained prior to use.

Skills

GD&T

Blueprint reading

FAI

AS9102

Metrology

Education

High School Diploma or GED

Tools

CMMs

Micrometers

Calipers

Dial indicators

Gauges

Job description

Summary

The Quality Control Inspector II performs independent inspection of machined and brazed aluminum components and assemblies used in Aerospace and Defense applications, with a focus on completing FAI (First Article Inspection). This role requires proficiency in blueprint interpretation, GD&T application, and the use of precision measuring equipment. The inspector works with minimal supervision and serves as a technical resource to production teams. This position reports to the Director of Quality.

• Strives towards a culture of proactive safety.


• Perform visual, mechanical, dimensional, and functional inspection of raw materials, components (CNC-machined and brazed), assemblies, and final products to ensure compliance with specifications.


• Interpret mechanical drawings using ASME Y14.5M dimensioning and tolerancing standards.


• Use precision measuring equipment, including micrometers, calipers, comparators, dial indicators, fixtures, gauges, surface plate setups, and CMMs as applicable.


• Operate CMM equipment for in-process and final inspections (training provided if needed).


• Perform First Article Inspections (FAI) in accordance with AS9102 requirements, including creation, verification, and documentation of all required forms and objective evidence.


• Completes the FAIs required to support the business operation to ensure successful and timely completion.


• Works with Quality Assurance representatives to complete other required reports (e.g., PPAP, PFMEA, etc.),


• Identify workmanship or material defects and initiate Non-Conforming Material Reports (NCMR).


• Assist Quality Engineers in investigating nonconformances and supporting CAPA activities.


• Complete and maintain accurate inspection documentation and records.


• Work from written instructions, procedures, statistical process controls, and engineering drawings.


• Learn the basics of C/A Design manufacturing processes to be able to provide analysis support for quality specifications and quality problems by addressing inspection-related issues.


• Ensure inspection equipment is properly calibrated and maintained prior to use.


• Other duties as assigned.

Summary

The Quality Control Inspector II performs independent inspection of machined and brazed aluminum components and assemblies used in Aerospace and Defense applications, with a focus on completing FAI (First Article Inspection). This role requires proficiency in blueprint interpretation, GD&T application, and the use of precision measuring equipment. The inspector works with minimal supervision and serves as a technical resource to production teams. This position reports to the Director of Quality.

Essential Duties And Responsibilities

• Strives towards a culture of proactive safety.


• Perform visual, mechanical, dimensional, and functional inspection of raw materials, components (CNC-machined and brazed), assemblies, and final products to ensure compliance with specifications.


• Interpret mechanical drawings using ASME Y14.5M dimensioning and tolerancing standards.


• Use precision measuring equipment, including micrometers, calipers, comparators, dial indicators, fixtures, gauges, surface plate setups, and CMMs as applicable.


• Operate CMM equipment for in-process and final inspections (training provided if needed).


• Perform First Article Inspections (FAI) in accordance with AS9102 requirements, including creation, verification, and documentation of all required forms and objective evidence.


• Completes the FAIs required to support the business operation to ensure successful and timely completion.


• Works with Quality Assurance representatives to complete other required reports (e.g., PPAP, PFMEA, etc.),


• Identify workmanship or material defects and initiate Non-Conforming Material Reports (NCMR).


• Assist Quality Engineers in investigating nonconformances and supporting CAPA activities.


• Complete and maintain accurate inspection documentation and records.


• Work from written instructions, procedures, statistical process controls, and engineering drawings.


• Learn the basics of C/A Design manufacturing processes to be able to provide analysis support for quality specifications and quality problems by addressing inspection-related issues.


• Ensure inspection equipment is properly calibrated and maintained prior to use.


• Other duties as assigned.

Experience

• High School Diploma, or General Education Degree (GED).


• 2-5 years of quality inspection experience in a manufacturing or machine shop environment.


• Practical understanding and application of GD&T.


• Experience using a variety of precision inspection instruments.


• Hands on experience performing First Article Inspections (FAI) and completing AS9102 documentation.


• Strong attention to detail and documentation accuracy.


• Proficiency with Microsoft Office.


• Strong verbal communication and problem-solving skills.

What We Offer

• Medical, dental, and vision insurance


• Generous Paid Time Off (PTO)


• Additional 40 hours of Sick Time


• Paid Parental Leave


• Competitive 401(k) plan with employer matching contributions


• Education reimbursement program for professional development


• Relocation assistance for eligible roles


• Climate-controlled facility


• Subsidized vending and on-site break areas


• Complimentary coffee and refreshments


• Clean, modern work environment with advanced equipment and technology


• Opportunities for career growth within a stable, growing aerospace manufacturing organization

Physical Requirements

• Ability to stand and walk for extended periods throughout the work shift.


• Ability to frequently use hands and fingers to operate machine controls, tools, and measuring instruments.


• Ability to lift, carry, push, and pull materials and components weighing up to 40 pounds, with or without reasonable accommodation.


• Ability to bend, stoop, kneel, crouch, and reach as required to load, unload, and inspect parts and equipment.


• Ability to perform repetitive motions involving the hands, wrists, and arms.


• Ability to visually inspect parts, interpret and read blueprints, technical drawings, work instructions, and use gauges, and measuring devices.


• Ability to distinguish colors, dimensions, and surface defects when performing quality inspections.


• Ability to hear and communicate effectively in a manufacturing environment.


• Ability to safely operate equipment in a fast-paced production setting while wearing required personal protective equipment (PPE), including safety glasses, hearing protection, safety shoes, and other equipment as required.


• Ability to work in an environment with exposure to machine noise, metal chips, cutting fluids, lubricants, and varying temperatures.


• Ability to maintain regular attendance and work scheduled shifts, including overtime as required.

Work Environment

• Manufacturing environment with exposure to moving mechanical equipment.


• Frequent interaction with machine tools, raw materials, and finished products.


• Compliance with all company safety policies, housekeeping requirements, and Foreign Object Debris (FOD) prevention practices.


• Required use of appropriate PPE and adherence to all safety procedures.

Essential Functions Disclaimer

Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.

About Heico

Heico has a history of success. Since its founding over 40 years ago The Heico Companies has grown from a single business to over 80 separate companies through a strategic acquisition policy, and by reinvesting its earnings into internal growth and new prospects. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. These four core operations are organized into groups: Metal Processing Group, Construction Solutions Group, Applied Solutions Group, and Industrial Technologies Group. Once acquired, new Heico companies are assigned to a group and run on a stand-alone basis, allowing for great independence as well as the opportunity to share knowledge about markets, production processes, and management practices across other Heico groups and companies. Each Group has its own corporate team. Heico continues to seek out new opportunities and maintain its standard of success. The Heico Companies has remained a privately held company since its creation and maintains a majority ownership in each of its operations, which generates more than $3.3 billion dollars in revenues. Many of our businesses are certified Woman-owned Business Enterprises (WBE). More information about the holding company and overall organization can be found at www.heicocompanies.com.