Facilities Building Sys Techn Sr.

The Ohio State University; Columbus (OH); On-site; USD 41,000 - 51,000; Full time

Benefits offered by this job

Evening/Weekend shift premiums

Job summary

The Ohio State University seeks a Facilities Building Sys Tech Sr. to support Student Life | North Maintenance. You will ensure safe, reliable operation of HVAC, electrical, plumbing and controls, while performing inspection, troubleshooting, calibration, and repair tasks.

Responsibilities include responding to emergencies, maintaining documentation, and delivering high levels of service to campus customers, in a union environment. Shift and overtime are possible.

Qualifications

• > Required: High school diploma/GED or equivalent combination of education and experience; high school algebra and geometry proficiency; minimum four years’ experience in building systems operations, commercial/industrial building maintenance and/or HVAC and building automation systems or equivalent combination of education and experience with 2 of those years working on large scale heating and cooling systems; obtain the following within the probationary period: EPA Section 608 Technician Certification- Universal and valid OSHA 10-hour General Industry Safety and Health card; successful completion of probationary period includes demonstrated competence in each of the identified technical specialties as required for this position’s level of responsibility. Must be able to push and pull 70 lbs. and distinguish colors. Climb and stand on ladders for extended periods of time. May work in hot, cold, dusty, or dirty environments for an extended period of time. May work in cramped spaces. Ma
• > Desired: Associates/technical degree or certificate in skilled trades/maintenance related field; two years’ experience with Direct Digital Controls (DDC) and building automation; boiler operator’s license (e.g., low pressure, high pressure); basic understanding of university building design standards (BDS) related to the maintenance and repair of building systems and equipment; basic understanding of the project process as managed by FOD Design and Construction.

Responsibilities

• Perform complex level tasks to ensure safe and comfortable environment and uninterrupted operations of kitchen equipment, refrigeration, mechanical and utilities systems.
• Inspect, troubleshoot, calibrate, repair or replace building systems and equipment; respond to emergencies and implement correct response protocols.
• Assist lower level technicians and coordinate with other trades; maintain safety practices and a clean work area; document activities and communicate with customers and supervision.
• Operate department vehicles and participate in shift assignments, including potential overtime and 24-hour emergency coverage.

Skills

problem solving

conflict management

computer

customer service

brazing and soldering

planning and prioritizing work

resource management

troubleshooting

Education

High school diploma or GED

Associates/technical degree or certificate in skilled trades/maintenance related field

EPA Section 608 Technician Certification- Universal

OSHA 10-hour General Industry Safety and Health

Tools

DDC systems

Building automation systems

Job description

Job Title:Facilities Building Sys Techn Sr.Department:Student Life | North Maintenance

Job Description

Under the general direction of a lead technician or supervisor, performs complex level tasks that ensure a safe and comfortable environment, uninterrupted operations of kitchen equipment, refrigeration, mechanical and utilities systems and equipment, and indoor air quality. Duties include but are not limited to: providing building support service and inspecting, troubleshooting, calibrating, and repairing/replacing building systems and equipment. Responds to emergency situations, such as electrical, mechanical and medical gas disruptions, evaluates and corrects defects. Initiates the correct response protocol when problems cannot be resolved. May assist lower level technicians.

Assists other trades as needed; adheres to all safety practices and procedures; cleans and maintains work areas and equipment; attends meetings; completes documentation; provides a high level of customer service; communicates to customers, coworkers and supervision via written, electronic and verbal methods and devices; operates department vehicles; and performs other duties as assigned. Actively supports our commitment to the university value of acting with integrity and personal accountability to establish a culture of professionalism in the workplace.

Shift, hours, days, and/or location are subject to change based on operational need in accordance with the collective bargaining agreement; may work overtime; subject to 24 hour emergency call.

Major Work Characteristics: Ability to:

• 1) read, understand and update blueprints, schematics and as built drawings,
• 2) read, understand and apply safety standards and practices (e.g., hazard communication, infection prevention, lock-out/ tag-out),
• 3) read, interpret and understand technical manuals and systems specifications,
• 4) follow applicable trade specific codes, standards and regulations,
• 5) learn technical skills and apply new knowledge to solve problems,
• 6) select and use hand, power and machine tools,
• 7) operate and test emergency generators,
• 8) maintain a clean and safe work environment,
• 9) add, subtract, multiply and divide whole numbers; calculate fractions, decimals and percentages; use algebra, geometry and trigonometry,
• 10) instruct others to perform a task,
• 11) provide guidance and expert advice about technical systems or processes,
• 12) locate, disable and enable electrical disconnects and plumbing shut-offs,

Skills

• 13) problem solving,
• 14) conflict management (e.g. handle complaints, identify issues and negotiate with others),
• 15) computer (e.g., data entry, data retrieval, electronic communication, internet searches, navigate and retrieve information from websites, create basic reports using Microsoft Word),
• 16) customer service (e.g. demonstrate empathy, meet quality standards, actively look for ways to help others),
• 17) brazing and soldering,
• 18) planning and prioritizing work,
• 19) resource management,
• 20) troubleshooting (e.g. integrated HVAC/R systems),

Knowledge of

• 21) chilled water and hot water systems integration and operation,
• 22) air flow and water balancing principles, tools and techniques,
• 23) relationship of preventive maintenance and equipment life-cycle,
• 24) building automation systems and controls,
• 25) AC/DC theory,
• 26) hydronics theory,
• 27) integration of building mechanical systems and controls,
• 28) boilers,
• 29) fire alarm system monitoring.

Qualifications

• Required: High school diploma/GED or equivalent combination of education and experience; high school algebra and geometry proficiency; minimum four years’ experience in building systems operations, commercial/industrial building maintenance and/or HVAC and building automation systems or equivalent combination of education and experience with 2 of those years working on large scale heating and cooling systems; obtain the following within the probationary period: EPA Section 608 Technician Certification- Universal and valid OSHA 10-hour General Industry Safety and Health card; successful completion of probationary period includes demonstrated competence in each of the identified technical specialties as required for this position’s level of responsibility. Must be able to push and pull 70 lbs. and distinguish colors. Climb and stand on ladders for extended periods of time. May work in hot, cold, dusty, or dirty environments for an extended period of time. May work in cramped spaces. May require valid State of Ohio driver license.
• Desired: Associates/technical degree or certificate in skilled trades/maintenance related field; two years’ experience with Direct Digital Controls (DDC) and building automation; boiler operator’s license (e.g., low pressure, high pressure); basic understanding of university building design standards (BDS) related to the maintenance and repair of building systems and equipment; basic understanding of the project process as managed by FOD Design and Construction.

Additional Information

Compensation

The pay range for this position is $29.70 - $37.13 based on experience. This position is eligible for evening and weekend shift premiums as applicable.

Location:Scott House (1108) Position Type:RegularScheduled Hours:40Shift:First Shift

Final candidates are subject to successful completion of a background check. A drug screen or physical may be required during the post offer process.

Thank you for your interest in positions at The Ohio State University and Wexner Medical Center. Once you have applied, the most updated information on the status of your application can be found by visiting the Candidate Home section of this site. Please view your submitted applications by logging in and reviewing your status. For answers to additional questions please review the frequently asked questions.

The university is an equal opportunity employer, including veterans and disability.