Fabrication Machine Operator

Wayne Fueling Systems LLC; Austin (TX); On-site; USD 45,000 - 60,000; Full time

Job summary

Dover Fueling Solutions seeks a Fabrication Machine Operator to produce quality metal parts safely and on time by setting up, operating, and monitoring CNC and other fabrication equipment across the campus. You will follow drawings and process sheets, perform inspections, and maintain a clean, organized work area in a fast-paced team environment.

The role emphasizes adherence to safety standards, continuous improvement, and collaboration with operations, engineering, maintenance, and quality

Qualifications

• High school diploma or equivalent preferred.
• Experience operating CNC, automated, semi-automated, or manual manufacturing equipment in a production environment.
• Ability to read and understand engineering drawings, process sheets, and written instructions.
• Ability to use precision measuring tools and verify parts meet dimensional and quality requirements.
• Basic mechanical aptitude and the ability to safely make routine machine and tooling adjustments.
• Strong attention to detail and the ability to recognize when a process or part is not meeting expectations.
• Willingness to learn and operate multiple fabrication machines and processes.
• Ability to work effectively in a fast-paced team environment while maintaining safety, quality, and production standards.
• Basic computer skills for training, communication, production reporting, and quality documentation.
• Ability to stand and walk for extended periods and lift materials or parts as required by the job.

Responsibilities

• Follow all company safety policies, PPE requirements, machine-guarding standards, and safe work practices at all times.
• Participate in safety initiatives by recognizing hazards, reporting unsafe conditions, and helping prevent injuries in the fabrication area.
• Read and follow work orders, engineering drawings, process sheets, and work instructions to produce parts to specification.
• Set up, operate, and monitor fully automated, semi-automated, and manual fabrication equipment as assigned.
• Load material, change or adjust tooling, verify setups, and prepare equipment for production runs.
• Monitor machine performance during production and make approved routine adjustments to maintain part quality and process consistency.
• Perform first-piece, in-process, and final inspections using calipers, micrometers, angle gauges, height gauges, tape measures, and other required measuring tools.
• Identify quality concerns early, separate questionable product, and communicate issues promptly to the supervisor, quality team, programmer, or maintenance team as needed.

Skills

CNC operation

Reading drawings

Measuring tools

Detail oriented

Education

High school diploma

Tools

Calipers

Micrometers

Angle gauges

Height gauges

Tape measures

Job description

At Dover Fueling Solutions (DFS), we are taking fueling and convenience retail to the next level. We are passionate about cultivating excellence in everything we do, but what really fuels us is our people. They’re the heart of our company. As an employee, our promise to you is that you’ll work on new and innovative products and solutions, be mentored by managers and teammates who are collaborative, caring, and act with integrity, and have the opportunity to grow in ways that are meaningful to you. Unique and interesting projects – both locally and globally – will challenge you and allow you to pursue different and rewarding career paths. We are #EnergizedByGrowth. DFS is part of a legacy of leadership that spans back generations, made up of some of the most trusted, leading-edge brands in the industry. As part of Dover Corporation and with our talented, innovative, outstanding people, we are doing great things and redefining what is possible in fueling and convenience retail. Providing advanced fuel-dispensing equipment, including clean energy solutions, systems and payment, automatic tank gauging and wet stock-management solutions, DFS comprises the product brands of Wayne Fueling Systems, OPW Fuel Management Systems, ClearView, Tokheim, ProGauge, Fairbanks, LIQAL, AvaLAN, and Bulloch Technologies. Headquartered in Austin, TX, DFS has a significant technology development and manufacturing presence worldwide, including facilities in Brazil, China, India, Italy, Poland, the Netherlands, the United Kingdom and the United States.

Fabrication Machine Operator Job Summary

The Fabrication Operator will produce quality metal parts safely, accurately, and on time by setting up, operating, and monitoring a variety of fabrication equipment based on production demand. This role operates fully automated, semi-automated, and manual CNC machines across the campus, by taking ownership of their machines and work area, following all safety and quality standards, supporting autonomous maintenance, maintain strong housekeeping discipline, and working as part of the team to achieve daily production and continuous improvement goals.

Responsibilities

• Follow all company safety policies, PPE requirements, machine-guarding standards, and safe work practices at all times.
• Participate in safety initiatives by recognizing hazards, reporting unsafe conditions, and helping prevent injuries in the fabrication area.
• Read and follow work orders, engineering drawings, process sheets, and work instructions to produce parts to specification.
• Set up, operate, and monitor fully automated, semi-automated, and manual fabrication equipment as assigned.
• Load material, change or adjust tooling, verify setups, and prepare equipment for production runs.
• Monitor machine performance during production and make approved routine adjustments to maintain part quality and process consistency.
• Perform first-piece, in-process, and final inspections using calipers, micrometers, angle gauges, height gauges, tape measures, and other required measuring tools.
• Identify quality concerns early, separate questionable product, and communicate issues promptly to the supervisor, quality team, programmer, or maintenance team as needed.
• Troubleshoot routine production issues involving setup, tooling, dimensional variation, material handling, or machine performance, and elevate when additional support is needed.
• Accurately report completed production, including counts, scrap, downtime, inspection checks, and other shop-floor documentation.
• Own autonomous maintenance for assigned machines and work areas, including cleaning, inspection, lubrication, minor adjustments, and reporting abnormal equipment conditions.
• Maintain a clean, organized, and inspection-ready work area in support of 5S or 6S standards and overall visual workplace expectations.
• Participate in Lean and Continuous Improvement efforts, including 5S, fast problem solving, root-cause analysis, waste reduction, and employee suggestion initiatives.
• Use daily communication tools, production boards, and team discussions to identify bottlenecks impacting performance and support corrective actions.
• Cross train across fabrication equipment and processes to support production flexibility and changing business needs.
• Work closely with operations, engineering, programming, maintenance, quality, and other team members to meet daily safety, quality, delivery, and productivity expectations.

Required Qualifications

• High school diploma or equivalent preferred.
• Experience operating CNC, automated, semi-automated, or manual manufacturing equipment in a production environment.
• Ability to read and understand engineering drawings, process sheets, and written instructions.
• Ability to use precision measuring tools and verify parts meet dimensional and quality requirements.
• Basic mechanical aptitude and the ability to safely make routine machine and tooling adjustments.
• Strong attention to detail and the ability to recognize when a process or part is not meeting expectations.
• Willingness to learn and operate multiple fabrication machines and processes.
• Ability to work effectively in a fast-paced team environment while maintaining safety, quality, and production standards.
• Basic computer skills for training, communication, production reporting, and quality documentation.
• Ability to stand and walk for extended periods and lift materials or parts as required by the job.

Preferred Qualifications

• Two or more years of experience in sheet metal fabrication or machine operation in a manufacturing environment.
• Experience with but not limited to CNC press brakes, laser cutting machines, turret punches, hardware insertion, cut to length machines, end forming, tube bending or similar fabrication machinery.
• Familiarity with sheet metal material characteristics such as thickness, grain direction, bend behavior, spring back, and handling requirements.
• Experience with first piece approval, in process inspection, and nonconforming material procedures.
• Experience with Lean tools such as 5-Why, fishbone diagrams, A3 thinking, standard work, or waste reduction methods.
• Experience with autonomous maintenance, or operator led preventive maintenance activities.

What Success Looks Like

A strong Fabrication Operator is dependable, safety-minded, quality-focused, and willing to learn across multiple processes. They take ownership of their machines and work area, communicate problems early, support the team, and look for practical ways to improve safety, flow, quality, and productivity every day. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position.

Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.

All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.