Environmental, Health and Safety Specialist

Leonardo

Tucson (AZ)

On-site

USD 70,000 - 110,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Leonardo in Tucson, AZ, seeks an Environmental, Health and Safety Specialist to support EHS operations in a semiconductor fabrication facility. You will manage high-hazard chemical handling, cleanroom safety, tool-install oversight, and regulatory compliance across federal and local requirements.

You will collaborate with operations, facilities, engineering, and tool-install teams to ensure safe startup, continuous improvement, and incident-free production.

Qualifications

  • Bachelor's degree in Environmental Science, Occupational Safety, Industrial Hygiene, Chemical Engineering, or related field.
  • 2-5 years of EHS experience, ideally in semiconductor, chemical manufacturing, or high-tech environments.
  • Strong knowledge of OSHA, EPA, NFPA, and semiconductor-specific codes (e.g., IFC Chapter 27, FM Global standards).
  • Experience with hazardous chemicals, gas detection systems, and emergency response.
  • Semiconductor fab experience preferred (tool install, cleanroom operations, or HPM management).
  • Certifications such as GISO, CHMM, CSP, CIH, or OSHA 30.
  • Experience with EHS management systems (ISO 14001, ISO 45001).
  • Familiarity with SPC, Lean, or Six Sigma methodologies.
  • Strong communication and ability to influence engineering and operations teams.
  • Analytical mindset with attention to detail in high-risk environments.
  • Comfortable wearing full cleanroom PPE and responding to alarms or emergencies.

Responsibilities

  • Cleanroom & Fab Operations: Monitor EHS compliance across cleanroom environments, gowning, chemical handling, and hazards.
  • Conduct routine fab walkthroughs to identify unsafe conditions, ergonomic risks, and process deviations.
  • Support tool qualification, startup, and change management (MOC) to ensure EHS controls.
  • Chemical & Gas Safety: Oversee hazardous production materials and gas safety.
  • Review and maintain SDS documentation, chemical inventories, and storage compliance.
  • Assist safety reviews for gas cabinets, VMB/VMP, and bulk chemical systems.
  • Participate in emergency response for spills, alarms, and upsets.
  • Environmental Compliance: Support air permit compliance and emissions monitoring.
  • Assist wastewater treatment, pH neutralization, fluoride removal, and metal discharge compliance.
  • Maintain hazardous waste areas and coordinate disposal per RCRA/state regs.
  • Conduct environmental sampling, inspections, and reporting.
  • Safety Programs & Compliance: Implement and maintain LOTO, confined space, fall protection, electrical safety, machine guarding.
  • Conduct incident investigations using root-cause methods.
  • Deliver EHS training for employees, contractors, and tool-install teams.
  • Support OSHA, EPA, fire marshal, and insurance inspections.
  • Tool Install & Facilities Support: Review tool install packages for EHS compliance.
  • Partner with facilities engineering on utilities.
  • Verify contractors follow fab safety protocols.

Skills

EHS Management
Hazardous chemicals
Regulatory compliance
Industrial Hygiene
Cleanroom safety
LOTO
Emergency response

Education

Bachelor's degree in EHS

Tools

SDS management software
Gas detection systems

Job description

Job Purpose:

The Environmental, Health and Safety Specialist supports day-to-day environmental, health, and safety operations within a semiconductor fabrication facility (fab). This role focuses on high-hazard chemical management, cleanroom safety, tool installation oversight, and regulatory compliance across federal, state, and local requirements. The Environmental, Health and Safety Specialist partners closely with operations, facilities, engineering, and tool-install teams to ensure safe startup, continuous improvement, and incident-free production.

Duties:
  • Cleanroom & Fab Operations: Monitor EHS compliance across Class 1-1000 cleanroom environments, including gowning protocols, chemical handling, and tool-specific hazards.
  • Conduct routine fab walkthroughs to identify unsafe conditions, ergonomic risks, and process deviations.
  • Support tool qualification, startup, and change management (MOC) processes to ensure EHS controls are integrated before release to production.
  • Chemical & Gas Safety: Oversee hazardous production materials (HPM) including pyrophorics, toxics, corrosives, flammables, and compressed gases.
  • Review and maintain SDS documentation, chemical inventories, and hazardous material storage compliance.
  • Support gas cabinet, VMB/VMP, and bulk chemical delivery system safety reviews.
  • Participate in emergency response for chemical spills, gas alarms, and system upsets.
  • Environmental Compliance: Support air permit compliance (e.g., VOCs, HAPs, acid gases) and emissions monitoring for scrubbers, abatement units, and exhaust systems.
  • Assist with wastewater treatment operations, including pH neutralization, fluoride removal, and metal discharge compliance.
  • Maintain hazardous waste accumulation areas and coordinate waste disposal in accordance with RCRA and state regulations.
  • Conduct environmental sampling, inspections, and reporting.
  • Safety Programs & Compliance: Implement and maintain programs such as LOTO, confined space, fall protection, electrical safety, and machine guarding.
  • Conduct incident investigations using root-cause methodologies.
  • Deliver EHS training for employees, contractors, and tool-install teams.
  • Support OSHA, EPA, fire marshal, and insurance inspections.
  • Tool Install & Facilities Support: Review tool install packages for EHS compliance, including exhaust requirements, chemical/gas connections, and ergonomic considerations.
  • Partner with facilities engineering on utilities (UPW, CDA, N2, vacuum, HVAC) to ensure safe operation and maintenance.
  • Verify that contractors follow fab safety protocols, including hot work, elevated work, and controlled access procedures.
Skills/Qualifications:
  • Bachelor's degree in Environmental Science, Occupational Safety, Industrial Hygiene, Chemical Engineering, or related field.
  • 2-5 years of EHS experience, ideally in semiconductor, chemical manufacturing, or high-tech environments.
  • Strong knowledge of OSHA, EPA, NFPA, and semiconductor-specific codes (e.g., IFC Chapter 27, FM Global standards).
  • Experience with hazardous chemicals, gas detection systems, and emergency response.
  • Semiconductor fab experience preferred (tool install, cleanroom operations, or HPM management).
  • Certifications such as GISO, CHMM, CSP, CIH, or OSHA 30.
  • Experience with EHS management systems (ISO 14001, ISO 45001).
  • Familiarity with SPC, Lean, or Six Sigma methodologies.
  • Strong communication and ability to influence engineering and operations teams.
  • Analytical mindset with attention to detail in high-risk environments.
  • Comfortable wearing full cleanroom PPE and responding to alarms or emergencies.

Leonardo is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

[NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.]

Here are the hiring process steps and what you can expect from us:
  1. Step 1: Application Review: Upon submitting your application, it is made available to the recruitment team to review and ensure you meet the basic qualifications.
  2. Step 2: Interview: If you have been identified to move forward in the process, you may be invited to participate in a one-on-one or panel interview. The interview format can be a phone call, in-person, or virtual meeting.
  3. Step 3: Offer: If you reach thi
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Environmental, Health and Safety Specialist
Environmental, Health and Safety Specialist

Leonardo Electronics US Inc. • Tucson (AZ)

On-site
USD 70,000 - 100,000
Environmental, Health and Safety Specialist
Environmental, Health and Safety Specialist

ADP, Inc. • Tucson (AZ)

On-site
USD 85,000 - 100,000
Environmental Health & Safety Specialist
Environmental Health & Safety Specialist

Micro Control Company • Arden Hills (MN)

On-site
USD 85,000 - 120,000
EHS Engineer
EHS Engineer

Sumidenso Automotive Technologies Asia Corporation • Hillsboro (OR)

On-site
USD 95,000 - 115,000
Environment, Health and Safety Manager
Environment, Health and Safety Manager

Us Tech Solutions • Boise (ID)

On-site
USD 75,000 - 95,000
Health & Safety Specialist II
Health & Safety Specialist II

HLBMA LLC • Ellabell (GA)

On-site
USD 65,000 - 90,000
Environmental & Sustainability Specialist I
Environmental & Sustainability Specialist I

HLBMA LLC • Ellabell (GA)

On-site
USD 60,000 - 75,000
Environmental Health Safety EHS Engineer
Environmental Health Safety EHS Engineer

QUANTUM COMPUTING, INC. • Odon (IN)

On-site
USD 70,000 - 100,000
EHS Specialist
EHS Specialist

Simpsonville Properties LLC • Simpsonville (KY)

On-site
USD 85,000 - 125,000
EHS Specialist
EHS Specialist

Baltimore Aircoil Company • Madera (CA)

On-site
USD 75,000 - 105,000