ELECTRONICS ENGINEER

U.S. Fleet Forces Command; Washington (District of Columbia); On-site; USD 90,000 - 130,000; Full time

Job summary

U.S. Fleet Forces Command is seeking a professional engineer capable of advancing precise time and time interval (PTTI) systems. The role includes developing and enhancing time transfer operations, analyzing performance, and supporting Master Clock activities.

The ideal candidate will have a strong engineering foundation, experience with PTTI, and proven ability to communicate across national and international timekeeping communities. Security clearances and DoD prerequisites are anticipated.

Qualifications

• Professional engineering degree required or registration as Engineer Intern/EIT or PE, with ABET accreditation or equivalent coursework.
• Experience with time and time interval (PTTI) systems is expected.
• Strong analytical and communication skills for national/international timekeeping communities.

Responsibilities

• Implement time and time interval systems policies and procedures.
• Troubleshoot unique and complex electronic systems.
• Communicate orally and in writing with the national and international timekeeping community.
• Perform statistical algorithms applied to frequency standards and time scale.
• Develop theoretical models or hardware where experimental data is lacking.

Skills

Time transfer systems

Troubleshooting complex electronics

Oral and written communication

Statistical algorithms

Theoretical modeling

Education

Professional engineering degree

ABET-accredited program

Job description

Duties

Help

• You will work with the development of new or significantly enhanced Measurement, Time Transfer and other Precise Time and Time Interval (PTTI) systems.
• You will analyze, evaluate, and improve existing operations in the time transfer system.
• You will troubleshoot unique complex electronic systems.
• You will contribute to the time-transfer systems and other Master Clock operations.
• You will develop new systems and improve existing systems through theoretical or hardware development.

Requirements

Help

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or pass the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress‑strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to the Basic Education Requirements for this position, your resume must also demonstrate:

GS-12

Your Resume Must Also Demonstrate At Least One Year Of Specialized Experience At Or Equivalent To The GS-11 Grade Level Or Pay Band In The Federal Service Or Equivalent Experience In The Private Or Public Sector. Specialized Experience Must Demonstrate The Following

The purpose of this developmental position is to provide for a period during which the selected employee will gain experience through progressively more responsible assignments. The incumbent will work under gradually decreasing supervisory controls until such time as the incumbent is fully qualified to assume the full range of duties and responsibilities, as described in the targe position. Supervision will become less detailed as the incumbent acquires additional knowledge and experience.

• Implementing time and time interval systems policies and procedures.
• Troubleshooting unique and complex electronic systems.
• Oral and written communication with national and international timekeeping community.
• Performing statistical algorithms as they apply to frequency standards and time scale.
• Developing theoretical models or hardware where guiding principles are relevant experimental data are nonexistent or controversial.

GS-11

Your Resume Must Also Demonstrate At Least One Year Of Specialized Experience At Or Equivalent To The GS-09 Grade Level Or Pay Band In The Federal Service Or Equivalent Experience In The Private Or Public Sector. Specialized Experience Must Demonstrate The Following

The incumbent applies a broad knowledge of diverse engineering concepts and procedures. Guidelines will normally apply to his/her assignments but require significant adaptations for particular assignments. The supervisor provides information and guidance on unusual problems. The incumbent determines the nature of the issues involved and independently plans, and carries out the work. The work is reviewed for general adequacy, effect of findings, and conformance with policies and procedures. The incumbent can make commitments on matters in his/her area that are covered by precedents, regulations, policies, and practices.

• Assisting with developing or significantly enhancing measurement, time transfer and other precise time and time interval (PTTI) systems.
• Analyzing and evaluating time transfer systems.
• Planning and managing technical programs.
• Oral and written communication with national and international timekeeping community.

Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF andhttps://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Basic Education Requirements

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress‑strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.