Electronic Controls Technician (Nights)

Coca Cola Southwest Beverages

Fort Worth (TX)

On-site

USD 48,000 - 66,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Performance-based incentives
Quarterly bonuses
Referral bonuses
Comprehensive benefits

Job summary

Coca-Cola Southwest Beverages in Fort Worth, TX is seeking a skilled Controls Technician to provide electrical and control support for plant operations. You will install, maintain, and troubleshoot systems up to 600V, read blueprints and one-line diagrams, and ensure compliance with safety codes.

Required are a high school diploma or GED, 3–5 years of maintenance experience, and proficiency with Allen Bradley PLCs, VFDs, HMIs, and industrial networks.

Qualifications

  • 3-5 years of manufacturing maintenance experience focused on controls and electronics.
  • Proficiency in controls equipment (Allen Bradley PLCs, VFDs, HMIs, industrial networks).
  • Basic PLC knowledge and ability to use PLC software programs.
  • Ability to read one-line diagrams, blueprints and schematics.
  • Must be able to lift up to 50 pounds.
  • Willingness to work up to 12-hour shifts as needed.

Responsibilities

  • Perform preventive maintenance on electrical and control systems, including disassembly, cleaning, reassembly, and calibration.
  • Read and translate building/process blueprints and one-line diagrams to install outlets, circuits, and load centers.
  • Test connections after installation to ensure proper operation and safety.
  • Troubleshoot electrical and controls issues on industrial equipment and processes.
  • Maintain motor control centers, switchgear, robots, transformers and generators.
  • Ensure compliance with local, state, and national electrical codes.
  • Update CMMS with maintenance records and reports.
  • Communicate safety hazards and coordinate with management and operators.
  • Support continuous improvement initiatives and share recommendations for maintenance processes.

Skills

Allen Bradley PLCs
VFDs
HMIs
Industrial networks
Reading schematics/one-line diagrams
PLC programming basics

Education

High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred

Tools

SLC 500
Controls Logix
Panel View Plus
Allen Bradley VFDs

Job description

Job Location: Fort Worth, Texas
Work days/Shift Hours - if applicable: 5:00 PM - Finish / 4-5 days a week

Compensation: Starting pay ranges from $34.83 to $47.97 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.

General Purpose

The role of a Controls Technician is to provide competent and effective electrical and controls support to Plant operations. The ability to perform work safely, meet the needs of Operations, execute the maintenance program and comply with all safety codes such as the National Electrical Code is paramount. The Controls Technician must ensure plant electrical and control systems are installed, maintained and modified in accordance with local, state and national electrical safety codes. The Controls Technical must identify, troubleshoot and repair problems in electrical and controls wiring and programming that occur in production equipment and systems and able to work with voltages up to 600V, three-phase & single-phase A/C circuits, transformers, switchgear, and motor control centers. He/she must be able to run tests, isolate problems, replace faulty sections of wiring, and perform other tasks as necessary. He/she also performs preventive maintenance and upgrades to electronic control systems.

Duties and Responsibilities
  • Perform preventive maintenance on electrical and control systems to include disassembly, cleaning, reassembly, and calibration.
  • Understand how to read and translate the information found within building and process blueprints and one-line diagrams to install outlets, circuits, load centers and other forms of electrical equipment.
  • After installing the electrical equipment, test all connections to ensure all components are working properly and safely.
  • Troubleshoot and diagnose electrical and controls issues in industrial equipment and processes using experience, system knowledge and proper instruments appropriate to the voltages and currents encountered.
  • Meet and follow local, state and national electrical codes.
  • Maintain motor control centers (MCC's), switchgear, industrial robots, electronic controllers on mechanized tools, as well as transformers and generators.
  • Communicate with management, engineers, mechanics, and equipment operators to advise them if there are any potential electrical hazards.
  • Install fiber optic cables, coaxial wires and computers in support of plant telecommunications systems.
  • Execute the maintenance work schedule as provided by his/her supervisor. Proper execution of the work schedule will require strategic decisions to ensure the scheduled work will be completed within the period scheduled.
  • Keep the assigned Plant Controls Specialist informed of all issues which may affect the operational capability of the area processes and equipment.
  • Examine jobs to be done and determine scope and best way to accomplish the work. Consult with requester, maintenance planner, and/or supervisor when necessary.
  • Obtain one-lines, drawings, instructional manuals and special procedures, as needed, from files or other sources. Make any additional sketches, diagrams, etc., necessary to clarify the intent of the work order.
  • Ensure the safety needs are given a top priority in operations support and work execution. Some examples are Arc Flash/Shock Hazard safety, confined space entry, LOTO, hazardous materials, hand tool safe use, etc.
  • Update the computerized maintenance management system (CMMS) as necessary to maintain accurate plant asset historical records.
  • Have complete knowledge of plant's processes and packaging systems.
  • Adhere to Good Manufacturing Practices (GMPs) in the execution of the work schedule and operational support. Ensure the shop is maintained in a safe and orderly fashion.
  • Enforce plant polices in the execution of their assigned duties.
  • Protect the integrity and quality of product at all times.
  • Attend meetings and supports continuous improvement initiatives.
  • Recommend equipment to be included in preventive maintenance programs.
  • Suggest improvements to all maintenance processes, including planning scheduling, preventive maintenance, corrective maintenance, CMMS, storeroom operations, etc.
  • Promote the conservation of energy and water.
  • Maintain close contact with assigned maintenance crew, the production supervisor and equipment production operator technicians.
  • Make recommendations for system improvement.
  • Maintain necessary records and files and distributes meaningful and accurate control reports.
  • Recommend additions to storeroom stock.
  • Perform other tasks and special assignments as requested by management.
Qualifications
Education
  • High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred.
Experience
  • High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred.
  • Basic industrial math skills, English language reading comprehension and writing
  • 3-5 Years of manufacturing maintenance experience focused on controls and electronics maintenance preferred.
  • Proficiency in controls equipment, i.e. Allen Bradley PLCs, VFDs, HMIs, and Industrial Networks required. Experience with various Human Machine Interfaces
  • Basic Programmable Logic Control (PLC) knowledge required.
  • Must be able to use a computer and associated PLC software programs
  • Able to execute small and medium projects involving controls equipment such as SLC 500, Controls Logix, Panel View Plus and Allen Bradley VFDs
  • Ability to follow manufacturers specifications and schematics.
  • Working knowledge of hand and power tools.
  • Able to read one-line diagrams, blueprints and schematics.
  • Ability to read and interpret a variety of technical data, such as schematics, one-line diagrams, and technical orders relating to the electrical trade.
  • Able to calculate electrical circuit load requirements.
  • Comprehensive knowledge of the operation, capabilities, and limitations of complex electrical power and distribution.
  • Maintenance background, which includes hydraulics, controls, electrical, PLC's, machine tools and pneumatics
  • Skill in troubleshooting electrical problems on large projects and applying test procedures.
  • Skill in the use of hand and power tools of the electrician trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment.
  • Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electrical systems.
  • May be required to provide own tools
  • Able to lift up to 50 pounds
  • Ability to work on multiple levels, such as catwalks, ladders, etc. and ability to work in extreme temperatures
  • Must have strong problem-solving skills and the ability to work efficiently under stressful situations
  • Must be able to work flexible shift schedules up to 12-hour shifts as determined by business need
  • Perform all tasks in a safe manner to ensure achievement of Quality, Service, Cost,Sustainability, and Safety objectives.
  • Knowledge of safety, environmental, and security regulations, practices, and procedures. Knowledge of regulations, procedures, and policies related to records maintenance and documentation.

Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at talentacquisition@cocacolaswb.com if you need assistance completing this application or to otherwise participate in the application process.

Know Your Rights dol.gov

Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronic Controls Technician (Nights)
Electronic Controls Technician (Nights)

Coca-Cola Bottlers (CONA Services) • Fort Worth (TX)

On-site
USD 48,000 - 66,000
Performance-based incentives
Quarterly bonuses
Referral bonuses
+1
Electronic Controls Technician (Days)
Electronic Controls Technician (Days)

Coca Cola Southwest Beverages • Fort Worth (TX)

On-site
USD 46,590 - 64,154
Performance-based incentives
Quarterly bonuses
Comprehensive benefits
Electronic Controls Technician (Days)
Electronic Controls Technician (Days)

Coca-Cola Bottlers (CONA Services) • Fort Worth (TX)

On-site
USD 47,000 - 58,000
Performance incentives
Quarterly bonuses
Referral bonuses
+1
Maintenance Mechanic (Nights)
Maintenance Mechanic (Nights)

Coca Cola Southwest Beverages • Fort Worth (TX)

On-site
USD 38,000 - 46,000
Production Technician (Nights)
Production Technician (Nights)

Coca Cola Southwest Beverages • Houston (TX)

On-site
USD 25,000 - 41,000
Industrial Maintenance Mechanic (Days)
Industrial Maintenance Mechanic (Days)

Coca Cola Southwest Beverages • Fort Worth (TX)

On-site
USD 38,000 - 43,000
Controls Technician
Controls Technician

Coca-Cola Bottling Co. Consolidated • Twinsburg (OH)

On-site
USD 31,000 - 52,000
401(k) match
Health coverage
Employee stock purchase plan
Industrial Maintenance Mechanic (Days)
Industrial Maintenance Mechanic (Days)

Coca Cola Southwest Beverages • Fort Worth (TX)

On-site
USD 38,000 - 43,000
Industrial Mechanic, Lead (Days)
Industrial Mechanic, Lead (Days)

Coca Cola Southwest Beverages • Abilene (TX)

On-site
USD 66,000 - 75,000
Controls Technician
Controls Technician

Coca-Cola Bottling Company UNITED, Inc. • Montgomery (AL)

On-site
USD 60,000 - 80,000
Two weeks paid vacation
Medical plan
Dental & vision
+4