Electronic Assembler - TVM

Indra Group; Overland Park (KS); On-site; USD 38,000 - 52,000; Full time

Job summary

Indra Group in Overland Park, KS is seeking an Electronic Assembler - TVM to hands-on assemble, wire, and integrate electrical, electronic, and mechanical TVM components. You will follow detailed drawings, BOMs, and assembly docs to build modules and complete machines with focus on quality and safety.

The role requires experience in electronics assembly, soldering, and crimping, plus the ability to read schematics and work with small components.

Qualifications

• High school diploma or equivalent is required.
• Minimum 18 months experience in electronics, electrical or similar assembly.
• Experience with soldering and wire crimping is required or preferred.
• Ability to read engineering drawings, schematics and BOMs.

Responsibilities

• Follow safety rules, procedures and production processes.
• Assemble and integrate electrical, electronic, mechanical components for TVMs.
• Assemble TVM modules and subassemblies per documentation and BOMs.
• Cut and prepare wire, cable and tubing to specified lengths.
• Route and terminate wires according to drawings and instructions.
• Inspect terminals for proper crimp quality and placement.
• Perform soldering and other soldering applications as required.
• Install connectors and verify polarity and orientation.
• Read engineering drawings and assembly instructions to place parts.
• Perform mechanical assembly with hand tools and equipment.
• Inspect assemblies to verify workmanship and specs.
• Identify issues and communicate to supervisor/engineering.
• Maintain production documentation and meet schedules.
• Support timely completion of TVM assemblies and continuous improvement.

Skills

Electronics assembly

Wiring

Soldering

Crimping

Mechanical assembly

Education

High school diploma or equivalent (GED)

Tools

Soldering equipment

Hand tools

Crimping tools

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Electronic Assembler - TVM

Overland Park, KS, US

8 days ago Requisition ID: 1133

The TVM Assembly Technician is responsible for the hands-on assembly, wiring, and integration of electrical, electronic, and mechanical components used in Ticket Vending Machines (TVMs). This position follows detailed assembly documentation, engineering drawings, schematics, and bills of materials to build and integrate TVM modules and completed machines while maintaining high standards for quality, workmanship, and safety.

The ideal candidate has experience with electronics assembly, wiring, soldering, crimping, and mechanical assembly and is comfortable working with small components and detailed documentation.

Duties and Responsibilities

• Follow company policies, procedures, safety requirements, and established production processes.
• Assemble and integrate electrical, electronic, mechanical, and electromechanical components used in Ticket Vending Machines.
• Assemble TVM modules and subassemblies by combining sheet metal components, printed circuit boards, cables, wire harnesses, connectors, and other components according to assembly documentation.
• Cut and prepare wire, cable, and vinyl tubing to specified lengths.
• Route, bundle, secure, and terminate wiring and cables according to drawings and assembly instructions.
• Operate wire crimping tools and inspect terminals for proper crimp quality and placement.
• Perform hand soldering and other soldering applications as required for TVM assembly.
• Use a solder pot for pre-tinning wires, terminals, and components when required.
• Install connectors and wiring while verifying correct polarity, pinouts, and component orientation.
• Insert and install electronic components into printed circuit boards according to assembly documentation.
• Read and interpret engineering drawings, electrical schematics, bills of materials (BOMs), work instructions, and assembly documentation.
• Perform mechanical assembly using hand tools and other production equipment.
• Inspect completed assemblies to verify workmanship, proper installation, and compliance with specifications.
• Identify and communicate assembly issues, discrepancies, or defects to the appropriate supervisor or engineering personnel.
• Maintain accurate production documentation and complete assigned work within established schedules.
• Support timely completion of TVM assemblies to meet production and delivery requirements.
• Participate in quality improvement initiatives and contribute to continuous improvement of assembly processes.
• Initiate Engineering Change Orders (ECOs) with supervisor approval when required.
• Properly use and care for company equipment, tools, materials, and other assets.
• Maintain a clean, organized, and safe work area.
• Perform other duties as assigned.
• Strong attention to detail and commitment to quality.
• Ability to follow detailed written and verbal instructions.
• Ability to work independently while also contributing effectively to a team.
• Strong mechanical and electrical/electronic assembly skills.
• Ability to troubleshoot basic assembly and wiring issues.
• Ability to consistently meet production schedules and deadlines.
• Good hand-eye coordination and manual dexterity when working with small components.
• Ability to safely and effectively use hand tools, crimping tools, soldering equipment, and other assembly equipment.

Education / Experience

• High school diploma or equivalent (GED) required.
• Minimum of 18 months of experience in electronics, electrical, electromechanical, or similar manufacturing assembly preferred.
• Experience assembling electrical/electronic equipment, wire harnesses, cables, or mechanical/electromechanical assemblies preferred.
• Experience with soldering and wire crimping required or strongly preferred.
• Experience working to IPC-A-610 or equivalent workmanship standards desired.
• Experience reading engineering drawings, electrical schematics, assembly drawings, and bills of materials preferred.
• Experience in a manufacturing or production environment is a plus.

Physical / Mental Demands

• Ability to lift and move materials or assemblies weighing up to 25 lbs.
• Ability to stand and/or walk for extended periods during the workday.
• Ability to use hand tools and perform repetitive assembly tasks.
• Manual dexterity and ability to work with small electrical and mechanical components.
• Ability to visually inspect components, wiring, solder joints, connectors, and completed assemblies; vision must be correctable to 20/20.
• Ability to distinguish colors for proper identification of wires and components.
• Ability to maintain concentration and attention to detail while performing repetitive and highly detailed assembly work.
• Ability to meet production schedules and deadlines while maintaining required quality standards.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This role may be authorized to access Controlled Unclassified Information (CUI) as required to perform assigned duties related to defense contract work. Any access to CUI will be granted according to the principle of least privilege and limited to the specific responsibilities, duties, and business need of the role.