Electromechanical Tech 1

Teasdale Foods Inc; Atwater (CA); On-site; USD 55,000 - 75,000; Full time

Benefits offered by this job

Health, Dental, & Vision

401(k) Matching

Career Growth Opportunities

Job summary

Teasdale Foods Inc is seeking an industrial maintenance technician to perform preventive maintenance, troubleshoot conveyors and pumps, and support PLC‑controlled equipment within a food manufacturing setting.

The role requires basic electrical knowledge, reading schematics, and safe use of hand and power tools; bilingual skills are a plus. The position is on-site in a fast-paced facility with strict safety and sanitation standards.

Qualifications

• High school diploma or GED preferred.
• Industrial maintenance certificate, apprenticeship coursework, trade‑school training, or relevant military technical training preferred.
• One to three years of industrial maintenance experience preferred.
• Candidates with at least six months of relevant industrial experience plus verified technical training may be considered.
• Demonstrated basic mechanical aptitude and safe use of hand tools, power tools, measuring tools, and maintenance test equipment.
• Working knowledge of mechanical power transmission, bearings, conveyors, pumps, pneumatics, basic hydraulics, and preventive‑maintenance practices.
• Basic industrial electrical knowledge.
• Must be able to demonstrate safe meter use and electrical fundamentals before performing electrical work independently.
• Ability to read work instructions, equipment manuals, diagrams, and basic schematics; ability to document completed work clearly in English.
• Ability to use a CMMS or learn to enter work orders, labor, parts usage, findings, and follow‑up work accurately.
• Basic math skills, including addition, subtraction, multiplication, division, fractions, decimals, and measurements.
• Ability to communicate respectfully and effectively with employees across departments and shifts.
• Bilingual English/Spanish skills are helpful but not required.

Responsibilities

• Perform preventive maintenance, lubrication, inspections, and corrective work per procedures, schedules, and manuals.
• Troubleshoot and repair mechanical issues on conveyors, bearings, belts, gearboxes, pumps, valves, and basic hydraulics.
• Inspect equipment for abnormal conditions and escalate findings.
• Perform basic electrical checks and component replacement when trained and authorized.
• Work with voltages from 24VDC to 480VAC following electrical safety requirements.
• Use meters/test equipment to verify voltage, continuity, current, or condition.
• Follow energized-work restrictions and escalation requirements.
• Use manuals, drawings, diagrams to complete tasks.
• Perform basic fabrication like cutting, grinding, drilling, welding when trained.
• Assist PLC‑controlled equipment, VFDs, instrumentation, robotics, installations, and improvements.
• Maintain CMMS work orders describing issue, repair, parts, labor, and status.
• Ensure safe and clean work areas; observe food-safety and sanitation rules.

Skills

Mechanical aptitude

Hand tools

Power tools

Measuring tools

Maintenance testing equipment

Industrial electrical knowledge

CMMS use

Reading schematics & manuals

Written English documentation

Math skills

Communication across shifts

Mechanical power transmission

Bearings, conveyors, pumps

Hydraulics & pneumatics basics

Safety compliance (Lockout/Tagout, PPE

Shift work / OT willingness

Education

High school diploma or GED

Industrial maintenance certificate or equivalent

Trade-school or apprenticeship training

Military technical training

Tools

CMMS

Job description

What You'll Do:

• Perform assigned preventive maintenance, lubrication, inspections, and corrective work in accordance with approved procedures, schedules, and equipment manuals.
• Troubleshoot and repair routine mechanical issues involving conveyors, bearings, chains, sprockets, belts, gearboxes, pumps, valves, seals, pneumatic cylinders, and basic hydraulic components.
• Inspect equipment for abnormal noise, vibration, heat, wear, looseness, leakage, misalignment, guarding concerns, or other developing failure conditions; promptly document andescalate findings.
• Perform basic electrical checks and component replacement only when trained, qualified, and authorized.
• Work may include fuses, relays, contactors, switches, sensors, solenoids, motors, and circuits from 24VDC through 480VAC in accordance with electrical‑safety requirements.
• Use meters and other approved test equipment safely to verify voltage, continuity, current, or component condition within demonstrated qualifications.
• Follow all energized-work restrictions and escalation requirements.
• Read and use equipment manuals, mechanical drawings, parts diagrams, basic electrical schematics, and basic pneumatic diagrams to complete assigned work.
• Perform basic fabrication, cutting, grinding, drilling, and welding for repairs or installations when trained and authorized; maintain sanitary design and food‑zone requirements.
• Assist higher‑level technicians with PLC‑controlled equipment, variable‑frequency drives, instrumentation, robotics, automation, utilities, major breakdowns, installations, and improvement projects.
• EM1 employees do not independently modify PLC programs or safety circuits.
• Support production start‑ups, changeovers, shutdowns, centerlining, and equipment adjustments while protecting product safety, employee safety, quality, and equipment condition.
• Respond to assigned breakdowns with urgency, establish clear communication with Operations, and escalat when the repair exceeds the employee's qualification, authorization, or available resources.
• Create and complete CMMS work orders accurately, including problem found, work performed, parts used, labor hours, equipment condition, follow‑up recommendations, and return‑to‑service status.
• Communicate open work, temporary repairs, safety concerns, and required follow‑up during shift passdown.
• Never leave equipment in an unsafe or unknown condition.
• Maintain tools, work areas, shops, parts, and job sites in a clean, organized, and food‑safe condition.
• Remove all tools, hardware, debris, and repair materials before releasing equipment.
• Participate in training, skills assessments, root‑cause discussions, breakdown‑elimination activities, 5S, and continuous‑improvement work appropriate to the position level.
• Follow all plant rules and procedures, including Lockout/Tagout, electrical safety, machine guarding, confined space, hot work, fall protection, chemical safety, PPE, GMPs, food safety, food defense, allergen control, and sanitation requirements.
• Perform other related duties assigned by maintenance leadership that are consistent with the employee's training, qualifications, and safe‑work authorization.

What You'll Need:

• High school diploma or GED preferred.
• Industrial maintenance certificate, apprenticeship coursework, trade‑school training, or relevant military technical training preferred.
• One (1) to three (3) years of industrial maintenance experience preferred.
• Candidates with at least six months of relevant industrial experience plus verified technical training may be considered.
• Demonstrated basic mechanical aptitude and safe use of hand tools, power tools, measuring tools, and maintenance test equipment.
• Working knowledge of mechanical power transmission, bearings, conveyors, pumps, pneumatics, basic hydraulics, and preventive‑maintenance practices.
• Basic industrial electrical knowledge.
• Must be able to demonstrate safe meter use and electrical fundamentals before performing electrical work independently.
• Ability to read work instructions, equipment manuals, diagrams, and basic schematics; ability to document completed work clearly in English.
• Ability to use a CMMS or learn to enter work orders, labor, parts usage, findings, and follow‑up work accurately.
• Basic math skills, including addition, subtraction, multiplication, division, fractions, decimals, and measurements.
• Ability to communicate respectfully and effectively with employees across departments and shifts.
• Bilingual English/Spanish skills are helpful but not required.
• Ability to work assigned shifts, overtime, weekends, holidays, or emergency call‑ins as business needs required.

Required Safety & Work Practices

Recognizes personal qualification limits and stops work when conditions are unsafe, unclear, or outside authorization. Applies Lockout/Tagout and verifies zero energy before servicing equipment unless an approved, task‑specific exception applies. Does not bypass guards, interlocks, safety relays, or protective devices and does not make unauthorized temporary repairs. Protects food‑contact areas and follows tool, hardware, foreign‑material, and post‑maintenance inspection controls. Reports injuries, near misses, food‑safety concerns, damaged equipment, and unsafe conditions immediately.

Special Equipment Used

Company‑approved hand tools, power tools, meters and test instruments, welding and cutting equipment, fabrication equipment, ladders, scissor lifts, boom lifts, forklifts, and other maintenance equipment appropriate to the employee's training and authorization. Licenses or certifications must be maintained when required.

Physical Demands

The physical demands described are representative of those required to perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions. Regularly stand, walk, bend, stoop, kneel, crouch, reach, climb stairs or ladders, and work in and around production equipment. Regularly use hands and arms to handle tools, parts, controls, and materials; perform work requiring manual dexterity and visual attention. Frequently lift and carry up to 50 pounds. Use team lifting or mechanical assistance for heavier, awkward, or unstable loads. Work at heights, in tight spaces, and from approved ladders, scissor lifts, or boom lifts when trained and authorized. Must be able to wear required PPE and safely work for extended periods in a physically active industrial environment.

Work Environment

Work is performed in a food‑manufacturing facility around moving machinery, wet or slippery surfaces, steam, hot surfaces, chemicals, electrical equipment, elevated noise, airborne particles, and indoor/outdoor temperature extremes that may range from freezing conditions to above 100°F. Required PPE and established safety procedures must be followed.

Benefits

• Unionized role with a set hourly rate of33.99.
• Health, Dental, & Vision Benefit Options.
• 401(k) Retirement Plan with Matching Contributions at 60 days.
• Career Growth Opportunities and Professional Development.

We are our people! We love food. Especially Mexican Food. Because of this passion, Teasdale Latin Foods understands that our people make a difference daily. Our employees are committed and excited to apply their expertise every day. From Manufacturing and R&D to Customer Service and Finance, all disciplines collaborate and strive for "Everyday Great Execution." In partnership with our Mission, Vision, and Operating Principles: we define our People Principles as living "LATIN" (Learning, Accountability, Teamwork, Innovation, and Nurturing), which is how our organization will ensure we always make the right decisions for our people and the company.