Electro/Mechanical Technician II - 1st Shift - Des Moines, IA

Renewal by Andersen

Des Moines (IA)

On-site

USD 65,000 - 90,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Andersen Corporation seeks a skilled Maintenance Technician to troubleshoot and repair complex mechanical, electrical, and hydraulic systems. You will read schematics, work with PLC controls, and perform preventive maintenance while adhering to lockout/tagout and 5S TPM standards.

The role requires a 2-year degree or equivalent plus 5 years in a related field and PLC troubleshooting experience, with strong problem-solving and communication skills.

Qualifications

  • 2-year degree or equivalent and 5 years' related field experience with 2 years' PLC troubleshooting.
  • PC knowledge for upgrading troubleshooting and machine functions via touch screen controls and software.
  • Advanced maintenance skills: carpentry, electrical, plumbing, welding, HVAC, and dust collection.
  • Ability to read mechanical, fluid power, building, electrical schematics, wiring diagrams and prints.
  • Proficient in PLC programming and troubleshooting machine controls including frequency drives, servo drives and touch panels.
  • Knowledge of safety practices such as lockout/tagout and proper use of PPE.
  • Excellent troubleshooting, reasoning, analytical problem-solving skills, with strong attention to detail and accuracy.
  • Ability to be a licensed lift equipment operator
  • Excellent time management, organizational and prioritization skills.

Responsibilities

  • Troubleshoot and repair all mechanical functions, mechanical drive units, industrial hydraulic and pneumatic powers, plumbing architectures, AC and DC circuits, electrical sensors and switches, motor controls and servo controllers, safety circuits which include E-stops, light curtains, floor mats, safety relays and safety switches.
  • Use appropriate tools to replace components, adjust and calibrate machinery, to resolve issues and restore equipment to operating condition quickly and efficiently.
  • Understand and participate in TPM initiatives, also assist in the deployment of TPM objectives
  • Understanding and performing preventive maintenance on all machinery, getting these done in a timely fashion, and document finished work.
  • Proficient at reading electrical schematics, wiring diagrams and prints.
  • Evaluate equipment for any repairs, enhancements, or upgrades and complete work as needed. - Perform and understand plumbing, and basic carpentry.
  • Perform welding and painting tasks.
  • Assure that all equipment is guarded.
  • Follow all lockout tagout procedures.
  • Work in a safe manner and follow all safety polices.
  • Participate in and sustain 5S activities.
  • Maintain inventory of supplies and spare parts.
  • Working with departments on (CIP) Continuous Improvement projects.
  • Assist with hazardous waste management.
  • Perform furniture and equipment moves when needed.
  • Good working knowledge of HVAC systems.
  • Working knowledge of electrical test equipment to measure current voltage and resistance. * Understand Hipot and Meggar meters.
  • Working knowledge and be able to repair pneumatic drills, screw guns, routers and saw motors.
  • Perform fabrication and installation of fixturing, guarding and any machine parts needed; design/layout, sheet metal work, welding, machine shop work, carpentry, and painting.
  • Work with engineering to implement design changes of equipment, jigs and fixturing for enhancement upgrades or replacements.
  • Working knowledge and ability to troubleshoot all mechanical functions, mechanical drives units, industrial hydraulic and pneumatic powers, AC and DC circuits, electrical sensors and switches, motor and controls and servo system controllers, safety circuits, light curtains, safety relays and safety switches.

Skills

PLC troubleshooting
Electrical troubleshooting
Mechanical troubleshooting
HVAC knowledge
Reading schematics
Lockout/Tagout
5S TPM
Preventive maintenance
Welding
Carpentry
Allen-Bradley PLCs
Electrical test equipment

Education

2-year degree or equivalent

Tools

Electrical test equipment
Hydraulic/pneumatic tools
Welding equipment

Job description

ANDERSEN CORPORATION SUMMARY:

At Andersen, we see possibility everywhere, every day and in everything we do. The possibility for our employees to achieve their full potential, for our communities to be stronger and for everyone to have a healthier, happier place to live.

Our portfolio of brands - Andersen Windows & Doors, Renewal by Andersen and Fenetres MQ - is crafted to serve customers across the new residential, home improvement and light commercial building sector.

Join our more than 13,000 employees who are inspired every day to deliver exceptional experiences that turn possibility into reality.

JOB DESCRIPTION:
PRIMARY RESPONSIBILITIES:
  • Troubleshoot and repair all mechanical functions, mechanical drive units, industrial hydraulic and pneumatic powers, plumbing architectures, AC and DC circuits, electrical sensors and switches, motor controls and servo controllers, safety circuits which include E-stops, light curtains, floor mats, safety relays and safety switches.
  • Use appropriate tools to replace components, adjust and calibrate machinery, to resolve issues and restore equipment to operating condition quickly and efficiently.
  • Understand and participate in TPM initiatives, also assist in the deployment of TPM objectives
  • Understanding and performing preventive maintenance on all machinery, getting these done in a timely fashion, and document finished work.
  • Proficient at reading electrical schematics, wiring diagrams and prints.
  • Evaluate equipment for any repairs, enhancements, or upgrades and complete work as needed. - Perform and understand plumbing, and basic carpentry.
  • Perform welding and painting tasks.
  • Assure that all equipment is guarded.
  • Follow all lockout tagout procedures.
  • Work in a safe manner and follow all safety polices.
  • Participate in and sustain 5S activities.
  • Maintain inventory of supplies and spare parts.
  • Working with departments on (CIP) Continuous Improvement projects.
  • Assist with hazardous waste management.
  • Perform furniture and equipment moves when needed.
  • Good working knowledge of HVAC systems.
  • Working knowledge of electrical test equipment to measure current voltage and resistance. * Understand Hipot and Meggar meters.
  • Working knowledge and be able to repair pneumatic drills, screw guns, routers and saw motors.
  • Perform fabrication and installation of fixturing, guarding and any machine parts needed; this includes some of the following: design, layout, sheet metal work, welding, machine shop work, carpentry, and painting.
  • Work with engineering to implement design changes of equipment, jigs and fixturing for enhancement upgrades or replacements.
  • Working knowledge and being able to troubleshoot all mechanical functions, mechanical drives units, industrial hydraulic and pneumatic powers, AC and DC circuits, electrical sensors and switches, motor and controls and servo system controllers, safety circuits, light curtains, safety relays and safety switches.
SECONDARY RESPONSIBILITIES:
  • Work with engineering to implement design changes of equipment, jigs, and fixturing for enhancement, upgrades, or replacements.
  • Work with IT Department on production equipment that is being implemented.
  • Work with engineering on new plant layouts/ moving of equipment, and additions of equipment.
  • Work with external contractors as needed, in both production and other related areas of the plant.
  • Additional duties as assigned.
QUALIFICATION AND SKILL REQUIREMENTS:
  • 2- year degree or equivalent and/or 5 years' experience in a related field AND 2 years' experience troubleshooting PLCs.
  • PC knowledge for upgrading troubleshooting and machine functions via touch screen controls and machine operation software.
  • Advanced maintenance skills: carpentry, electrical, plumbing, welding, machine piping, HVAC, and dust collection.
  • Ability to troubleshoot electrical, mechanical, pneumatic, and hydraulic problems.
  • Ability to read and understand mechanical, fluid power, building, electrical schematics, wiring diagrams and prints.
  • Proficient in PLC programming and troubleshooting machine controls including frequency drives, servo drives and touch panels.
  • Broad knowledge of PLC's and electrical principles. Allen Bradley PLC programming experience. Experience troubleshooting machine controls and other sequential processes.
  • Must have working knowledge and experience in 480, 208 3-phase, 120 single phase, and 24v low voltage electrical circuitry and wiring.
  • Ability to effectively use testing equipment including (electrical, mechanical, and fluid power).
  • Knowledge and use of hand, power, shop tools and equipment.
  • Knowledge of safety practices such as lockout/tagout and proper use of PPE.
  • Basic reading and math skills
  • Possess excellent troubleshooting, reasoning, analytical problem-solving skills, with strong attention to detail and accuracy.
  • Effective communication skills, oral and written.
  • Ability to be a licensed lift equipment operator
  • Excellent time management, organizational and prioritization skills.
  • Be able to work alone a
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electro-Mechanical Maintenance Technician I (1st Shift) Locust Grove, GA
Electro-Mechanical Maintenance Technician I (1st Shift) Locust Grove, GA

Renewal by Andersen • Locust Grove (GA)

On-site
USD 85,000 - 105,000
$5k Sign-On Bonus: Electro/Mechanical Technician III - 2nd Shift - Bayport, MN
$5k Sign-On Bonus: Electro/Mechanical Technician III - 2nd Shift - Bayport, MN

Renewal by Andersen • Bayport (MN)

On-site
USD 70,000 - 95,000
Sign-on bonus
Team mentorship
Competitive benefits
Maintenance Technician II - 1st Shift - Des Moines, IA
Maintenance Technician II - 1st Shift - Des Moines, IA

Andersen Windows, Inc. • Des Moines (IA)

On-site
USD 46,000 - 53,000
401(k) plan
Profit sharing
Medical, dental and vision coverage
+1
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA

Andersen Windows, Inc. • Des Moines (IA)

On-site
USD 50,000 - 54,000
401(k) Plan
Medical, Dental & Vision
Paid Time Off
+1
Maintenance Technician II - 1st Shift - Des Moines, IA
Maintenance Technician II - 1st Shift - Des Moines, IA

EMCO Enterprises LLC • Des Moines (IA)

On-site
USD 46,000 - 53,000
401(k) Plan
Profit Sharing
Medical, Dental and Vision Coverage
+5
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA

EMCO Enterprises LLC • Des Moines (IA)

On-site
USD 50,000 - 54,000
401(k) Plan
Profit Sharing
Medical, Dental and Vision
+2
Maintenance Technician II - 1st Shift - Des Moines, IA
Maintenance Technician II - 1st Shift - Des Moines, IA

Andersen Corporation • Des Moines (IA)

On-site
USD 45,000 - 52,000
401(k) Plan
Profit Sharing
Medical, Dental and Vision Coverage
+5
$5k Sign-On Bonus: Electro/Mechanical Technician IV - 1st Shift - Bayport, MN
$5k Sign-On Bonus: Electro/Mechanical Technician IV - 1st Shift - Bayport, MN

Renewal by Andersen • Bayport (MN)

On-site
USD 70,000 - 100,000
Sign-on bonus
PTO based on experience
Tools & uniforms provided
+2
Maintenance Technician III - 1st Shift - Bayport, MN
Maintenance Technician III - 1st Shift - Bayport, MN

Andersen Windows, Inc. • Minnesota

On-site
USD 51,000 - 63,000
401(k) plan
Profit sharing
Paid time off
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA
Electro/Mechanical Technician II - 1st Shift - Des Moines, IA

Andersen Corporation • Des Moines (IA)

On-site
USD 50,000 - 54,000
401(k) Plan
Profit Sharing
Medical, Dental and Vision Coverage
+2