Electrician (Industrial)

Viewpoint, Inc.; Raeford (NC); On-site; USD 2,066,000 - 3,031,000; Full time

Benefits offered by this job

Medical insurance

Dental insurance

Vision insurance

401(k)

Career development

Job summary

Thompson Construction Group, Inc. is seeking an Electrician Helper to plan, install, and repair wiring and electrical fixtures per customer specifications and blueprints, with emphasis on safety and efficiency.

The company supports professional growth and a strong on-site culture. This position requires following blueprints, pulling wires, assembling conduit, wiring to panels and motors, testing circuits, and using a range of hand and power tools on active job sites.

Qualifications

• Must be at least 18 years of age.
• Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as an Electrician Helper in the field.
• In some cases, the Electrician may be required to have state or local certifications.
• Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
• Utilize basic math and a calculator, read tape measure and understand the operation and usage of a voltmeter/multimeter.
• Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
• Candidate may be required to pass a drug test and criminal background check based on job location/requirements.

Responsibilities

• Plan installations to minimize waste, provide future access and avoid hazardous wiring consistent with code.
• Follow blueprints, ensuring wiring is installed before walls, ceilings or floors are completed.
• Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender, assisted by Electrician Helper.
• Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
• Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
• Connect power cables to electric motors or pumps and install grounding leads.
• Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
• Connect power cables to equipment, such as an electric range or motor, and install grounding leads.
• Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as an ohmmeter, battery and buzzer, and an oscilloscope.
• Observe the operation of installed equipment or systems to detect hazards and the need for adjustments, relocation, or replacement.
• Other duties as assigned.

Skills

Read tape measure

Basic math

Clear communication

Education

Construction Electrician Course

Tools

Multi-Voltage Tester

9” Side Cutters

440 Channel Locks

Open End Wrenches 3/8–3/4

Lug Crimp Tool (T&B)

Needle Nose Pliers

Tool Box w/lock

Hack Saw and Blade

Phillips Screw Driver

3/8–3/4 Drive Sockets

9” Level

Crescent Wrenches 8” and 10”

Leather gloves

Tape Measure 25’

Center Punch

Hammer

Working Flash Light

Tri-Square or Speed Square

Pad and Pencil

Wire Stripper

Diagonal Cutters

Job description

Position Description

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting, and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development, along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina, with offices spanning the United States, primarily the southeast and central United States.

Plan the layout, install and repair wiring, electrical fixtures, apparatus and control equipment according to customer specifications and blueprints by performing the following duties in a safe and timely manner.

Job Responsibilities

• Plan installations to minimize waste, provide future access and avoid unsightly, hazardous and unreliable wiring consistent with code.
• Follow blueprints, ensuring that wiring is installed before walls, ceilings or floors are completed.
• Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender, assisted by Electrician Helper.
• Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
• Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
• Connect power cables to electric motors or pumps and install grounding leads.
• Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
• Connect power cables to equipment, such as an electric range or motor, and install grounding leads.
• Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as an ohmmeter, battery and buzzer, and an oscilloscope.
• Observe the operation of installed equipment or systems to detect hazards and the need for adjustments, relocation, or replacement.
• Other duties as assigned.
• Minimum Required Tool List:
• 1 each Multi-Voltage Tester
• 1 each 9” Side Cutters
• 2 each 440 Channel Locks
• 1 set 3/8” to 3/4" Open End Wrenches
• 1 each #14 thru #10 Lug Crimp Tool (T&B)
• 1 each Needle Nose Pliers
• 1 each Tool Box or Bag w/lock
• 1 each Hack Saw and Blade
• 1 each Large Phillip Head Screw Driver
• 1 each Small Phillips Head Screw Driver
• 1 set 3/8” to 3/4” Drive Sockets w/ratchet
• 1 each 9” Level
• 1 each 8” and 10” Crescent Wrenches
• 1 pair of leather gloves
• 1 each 25’ Tape Measure
• 1 each Center Punch
• 1 each Hammer
• 1 each Working Flash Light
• 1 each Tri-Square or Speed Square
• 1 each Pad and Pencil
• 1 each Wire Stripper
• 1 each Diagonal Cutters

Position Requirements

Job Qualifications

• Must be at least 18 years of age.
• Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as an Electrician Helper in the field.
• In some cases, the Electrician may be required to have state or local certifications.
• Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
• Utilize basic math and a calculator, read tape measure and understand the operation and usage of a voltmeter/multimeter.
• Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
• Candidate may be required to pass a drug test and criminal background check based on job location/requirements.

Equal Opportunity Employer

Thompson Construction Group, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status or genetics. In addition to federal law requirements, Thompson Construction Group, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

• We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.