Electrical Installation Lead- Devices & Controls, OMHS

Amazon

Bellevue (WA)

On-site

USD 92,000 - 138,000

Full time

30 hours ago

Be an early applicant

Get more replies from employers

Send a job-specific resume in minutes.

Job summary

Amazon is seeking an Electrical Installation Lead – Low Voltage Devices & Controls to drive installation, configuration, and validation of field devices and LV control systems across multiple fulfillment centers in the United States.

You will provide field-based leadership focused on LV device installation, sensor deployment, VFD configuration, E-stop systems, fieldbus cabling, and commissioning readiness. This role reports to the Site Deployment Manager and travels up to 50% domestically.

Qualifications

5+ years in industrial electrical installation or related field.
Experience supervising electrical device installation crews.
Experience reading device layout drawings, wiring diagrams, and control panels.
Ability to travel up to 50% domestically; travel may exceed 50% with short notice.

Responsibilities

Lead and manage electrical installation crews focused on low-voltage device installation and configuration for MHE systems across North American facilities
Direct installation of field devices including photo eyes, proximity sensors, encoders, limit switches, E-stop devices, pull cords, safety devices, and barcode scanners
Oversee VFD installation, mounting, power connections, and control wiring
Manage I/O block installation, wiring, and terminal connections per I/O lists and wiring diagrams
Direct installation of zone controllers, actuators, operator stations, and stack lights
Oversee E-stop cable system installation including cable runs, tensioning, I-bolt and pulley placement, and pull cord routing
Manage sensor mounting, orientation, and alignment to ensure proper detection coverage
Direct 24VDC control circuit wiring, device terminations, and panel-to-device connections
Oversee fieldbus and industrial communication cabling installation (Ethernet/IP, Profinet, EtherCAT, AS-i) with attention to routing, labeling, addressing, and termination quality
Coordinate device installation activities with power distribution teams, mechanical installation, controls engineering, IT/network teams, and vendors
Manage zone sequencing with the Power Distribution & Infrastructure lead — device installation begins once conduit, panels, and wire are in place
Coordinate with controls commissioning on energization readiness, I/O verification results, and open items
Track device installation progress, risks, blockers, and quality issues, escalating when support is needed
Participate in project-level technical reviews, installation readiness reviews, and commissioning readiness reviews
Manage relationships with device vendors, OEMs, integrators, and internal project stakeholders
Participate in daily business reviews with installation progress and commissioning readiness updates
Maintain accurate field documentation including punch lists, issue logs, QC observations, and turnover documentation

Skills

Team leadership

Electrical installation supervision

Field-based work

Reading electrical drawings

Travel willingness

Job description

Description

Amazon is seeking an Electrical Installation Lead – Low Voltage Devices & Controls to drive the successful installation, configuration, and validation of field devices and low-voltage control systems for automation and material handling equipment across multiple greenfield and brownfield fulfillment center sites. This role provides field-based technical leadership focused specifically on low-voltage device installation, sensor deployment, VFD configuration, E-stop systems, fieldbus cabling, and device commissioning readiness. This role reports to the Site Deployment Manager and follows the Power Distribution & Infrastructure lead through each zone — your team mobilizes once conduit, panels, and heavy wire are in place. You are the last electrical installation step before controls commissioning, making precision, attention to detail, and commissioning readiness the defining measures of success.

Location

Location: Anywhere in the United States

Travel

Travel: Up to 50% domestic travel required; may exceed 50% with short notice

Key job responsibilities

Lead and manage electrical installation crews focused on low-voltage device installation and configuration for MHE systems across North American facilities
Direct installation of field devices including photo eyes, proximity sensors, encoders, limit switches, E-stop devices, pull cords, safety devices, and barcode scanners
Oversee VFD installation, mounting, power connections, and control wiring
Manage I/O block installation, wiring, and terminal connections per I/O lists and wiring diagrams
Direct installation of zone controllers, actuators, operator stations, and stack lights
Oversee E-stop cable system installation including cable runs, tensioning, I-bolt and pulley placement, and pull cord routing
Manage sensor mounting, orientation, and alignment to ensure proper detection coverage
Direct 24VDC control circuit wiring, device terminations, and panel-to-device connections
Oversee fieldbus and industrial communication cabling installation (Ethernet/IP, Profinet, EtherCAT, AS-i) with attention to routing, labeling, addressing, and termination quality

Configuration, Commissioning Readiness & QC

Manage parameter setting and programming for all field devices including dip switches, photo eye training, sensor calibration, and VFD configuration
Oversee match‑mark cable connections to verify correct device-to-panel wiring
Lead electrical QC activities including I/O verification — checking for shorts, breaks, stretched wires, and confirming wire labels match drawings
Manage E-stop system testing and verification across all installed zones
Verify sensor functionality, detection ranges, and operational parameters before handoff to controls commissioning
Oversee side cover installation on completed conveyor sections
Manage electrical device punchlist identification and repair
Partner with controls commissioning team to validate system readiness for energization
Ensure cable management, wire labeling, and device labeling meet standards before zone closeout

Technical Leadership & Standards

Provide technical expertise for low-voltage control systems, 24VDC circuits, field devices, and industrial communication networks
Review and interpret device layout drawings, I/O lists, wiring diagrams, control panel drawings, and fieldbus addressing schedules
Follow and help develop device installation standards and best practices
Create and maintain technical documentation including device installation SOPs, configuration checklists, and QC verification procedures
Identify, troubleshoot, and resolve device installation issues that may impact commissioning readiness or system functionality
Support development of scalable installation practices and field standards across multiple sites
Recommend and implement process improvements to increase device installation efficiency and first-pass quality

Coordination & Communication

Coordinate device installation activities with power distribution teams, mechanical installation, controls engineering, IT/network teams, and vendors
Manage zone sequencing with the Power Distribution & Infrastructure lead — device installation begins once conduit, panels, and wire are in place
Coordinate with controls commissioning on energization readiness, I/O verification results, and open items
Track device installation progress, risks, blockers, and quality issues, escalating when support is needed
Participate in project-level technical reviews, installation readiness reviews, and commissioning readiness reviews
Manage relationships with device vendors, OEMs, integrators, and internal project stakeholders
Participate in daily business reviews with installation progress and commissioning readiness updates
Maintain accurate field documentation including punch lists, issue logs, QC observations, and turnover documentation

A day in the life

Your day starts at the site coordination meeting where you review which zones have completed power infrastructure installation and are ready for device mobilization. You walk the floor with your device crew — verifying photo eye mounting positions against device layout drawings, checking sensor orientation and alignment, and confirming that I/O blocks are properly wired to the correct panel terminals. You oversee VFD installation and verify that dip switches and parameter settings match the configuration schedule. You check E-stop cable installation — verifying proper tension, I-bolt placement, and pull cord routing meets Amazon safety standards. Mid‑day you inspect fieldbus cabling installations, verifying Ethernet/IP or Profinet routing, cable labeling, addressing, and termination quality. By afternoon, you're working with your QC crew to validate I/O verification results — checking for shorts, verifying wire labels match drawings, confirming sensor functionality, and ensuring side cover installations are complete. You coordinate with the controls commissioning team on upcoming energization zones and close out at the daily business review with readiness status and any open items.

This team is able to hire anywhere in the USA.

About The Team

OneMHS (One Material Handling Systems) is Amazon's in-house program for designing, procuring, and installing material handling equipment across its fulfillment network. Rather than relying solely on external integrators, OneMHS brings the full lifecycle of MHE deployment under Amazon's direct control — from final engineering and equipment procurement through mechanical and electrical installation, controls integration, and commissioning. The program supports both greenfield builds and brownfield retrofits, deploying conveyor systems, sorters, induction systems, and robotic work cells at scale. OneMHS enables Amazon to deliver faster, more cost‑effective installations while maintaining higher quality and safety standards.

Basic Qualifications

Experience in engineering including a supervisory role managing people
Experience in a fast‑paced, automated, industrial, logistics, production or manufacturing environment
5+ years of experience in industrial electrical installation, controls installation, automation deployment, or a similar technical environment
Experience leading or supervising electrical device installation crews, controls technicians, or field execution teams
Experience reading and interpreting device layout drawings, I/O lists, wiring diagrams, and control panel drawings
Experience with low-voltage control systems including 24VDC circuits, field devices, sensors, VFDs, and industrial communication networks
Ability to travel up to 50% domestically; travel may exceed 50% in some instances with short notice

Preferred Qualifications

Experience of automated equipment including packaging machinery, sortation and conveyor systems
Experience in preventative maintenance systems

Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.

Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

The base salary range for this position is listed below. Your Amazon package will include sign‑on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits.