Electrical Engineer - Utility Distribution Power Systems - Oil and Gas

Atwell, LLC; United States; Remote; USD 90,000 - 120,000; Full time

Benefits offered by this job

401K match

Tuition Assistance

Paid Time Off

Annual bonuses

Health insurance

Flexible work schedules

Job summary

Atwell, LLC in the United States is seeking a mid-level Electrical Engineer for the Oil & Gas group to support industrial, utility, and oil & gas projects across North America with a focus on power system studies and substation design.

You will collaborate with clients, utilities, vendors, and multidisciplinary teams to develop deliverables, perform studies with ETAP/SKM/PSS/E, and communicate findings. Travel up to 25% may be required.

Qualifications

• Bachelor's degree in Electrical Engineering or Electrical Engineering Technology from an accredited institution.
• 2–6 years of relevant electrical engineering, utility engineering, industrial power systems, consulting engineering, or oil & gas experience.
• FE/EIT is preferred; progress toward PE licensure is strongly preferred.
• Experience performing power system studies using ETAP, SKM, EasyPower, PowerFactory, Milsoft, or similar software.
• Exposure to PSS/E and transmission planning tools.
• Knowledge of medium- and low-voltage power systems; distribution, transmission, substation, or industrial power systems preferred.
• Utility distribution experience; overhead and underground distribution systems and utility standards.
• Exposure to protective relaying, relay coordination, SEL relays, substation systems, or interconnections preferred.
• Strong client interaction and communication; travel up to 25%
• Ability to work with limited supervision while meeting quality, schedule, and budget.

Responsibilities

• Perform electrical engineering and design activities for industrial, utility, and oil & gas facilities, including MV/LV distribution systems.
• Prepare models and perform power system studies using ETAP, SKM, PSS/E, PSCAD, or similar software.
• Develop and maintain power system models; prepare clear technical reports for clients and project teams.
• Support medium/high voltage T&D projects, including distribution upgrades and transmission studies.
• Assist with relay coordination and protection-related engineering activities.
• Create electrical deliverables such as one-line/three-line diagrams and wiring diagrams.
• Coordinate with clients, utilities, vendors, and multidisciplinary teams to support project execution.
• Participate in client meetings and document action items.
• Support projects from preliminary design through issued-for-construction deliverables.
• Provide field assistance, startup and commissioning support as required.

Skills

Power systems

ETAP/SKM/PSSE

Communication skills

Team collaboration

Travel availability

Education

Bachelor's degree in Electrical Engineering or Electrical Engineering Technology

Tools

ETAP

SKM

PSS/E

PSCAD

EasyPower

PowerFactory

Milsoft

Job description

Who We Are

Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing!

Atwell, LLC is a proud recipient of the following 2025 awards:

• Ten consecutive years in a row as a “Best Place to Work” by Zweig Group (#11)
• Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region
• Recognized in Crain’s “Fast 50” as one of the fastest-growing companies (#14)
• Recognized as the 2025 ENR Design Firm of the year for the southeastern US

About the Position

As a mid-level Electrical Engineer in the Oil & Gas group, you will support industrial, utility, and oil & gas projects throughout North America with a focus on power system studies, utility distribution engineering, substation support, and detailed electrical design. This role is intended for a strong mid-level engineer who can execute assigned engineering deliverables with limited supervision while collaborating directly with clients, utilities, vendors, and multidisciplinary project teams.

Essential Responsibilities

• Perform electrical engineering and design activities for industrial, utility, and oil & gas facilities, including medium-voltage and low-voltage power distribution systems.
• Prepare computer-based models and perform power system studies using ETAP, SKM, PSS/E, PSCAD, or similar software, including short circuit, load flow, protective device coordination, arc flash, motor starting, harmonic analysis, and related studies.
• Develop and maintain power system models, validate study results using engineering judgment, and prepare clear technical reports and recommendations for clients and project teams.
• Support medium and high voltage T&D projects, including overhead and underground distribution systems, utility coordination, distribution upgrades, transmission studies, and construction package development.
• Support substation, relay, and protection-related engineering activities, including relay coordination, protective relay settings, and control and relaying schematics under the direction of senior engineers.
• Develop electrical deliverables such as one-line diagrams, three-line diagrams, control schematics, wiring diagrams, equipment specifications, calculations, studies, RFIs, and construction packages.
• Coordinate directly with clients, utilities, vendors, contractors, and multidisciplinary engineering teams to support project execution and resolve technical issues.
• Participate in client meetings, communicate technical findings, document action items, and support engineering decisions through clear written and verbal communication.
• Support projects from preliminary design through detailed design, including 30%, 60%, 90%, and issued-for-construction deliverables with oversight from senior engineering staff.
• Provide field assistance, troubleshooting, startup support, and commissioning support as required.
• Check the work of designers, drafters, and field personnel for general quality and accuracy as required.
• Understand and apply applicable codes, standards, and client requirements such as NEC, NESC, IEEE, NFPA 70E, and utility standards.
• Other duties as assigned.

Must Have

• Education: Bachelor’s in Electrical Engineering or Electrical Engineering Technology from an accredited institution; electric power option preferred
• Experience: 2 - 6 years of relevant electrical engineering, utility engineering, industrial power systems, consulting engineering, or oil & gas experience
• Licensure: FE/EIT is preferred; progress toward PE licensure is strongly preferred
• Experience performing power system studies using ETAP, SKM, EasyPower, PowerFactory, Milsoft, or similar software
• Preferred exposure to PSS/E, similar transmission planning and power system analysis tools
• Knowledge and familiarity with medium-voltage and low-voltage power systems; experience with distribution, transmission, substation, or industrial power systems preferred
• Utility distribution experience, including exposure to overhead and underground distribution systems, utility standards, and utility coordination
• Exposure to protective relaying, relay coordination, SEL relays, substation systems, or utility interconnections is preferred
• Previous interactions with clients, customers, contractors, utilities, vendors, and other project stakeholders
• Ability to assist with client contacts and communication pertaining to specific assignments, meetings, and project deliverables
• Ability to execute assigned engineering tasks with limited supervision while maintaining quality, schedule, and budget expectations
• Ability to travel up to 25% across states for field work, client meetings, commissioning, and project support as needed
• Possesses effective written and oral communication skills
• Good interpersonal and people skills, with the ability to collaborate effectively in a full-time remote work environment
• Applicants must be currently authorized to work in the United States on a full-time basis

Pay Range - $90,000 - $120,000, + benefits, + bonus.

Disclaimer

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

Atwell Benefits:

To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs.

Work/Life:

• Generous Paid Time Off
• Paid Parental Leave
• Flexible work schedules are available for some positions
• Tenure Awards - Travel Vouchers to see the world based on your travel preferences

Compensation:

• Competitive Compensation packages
• Annual bonuses, spot bonuses and peer recognition awards
• 401K match - 1:1 up to 4% of compensation
• Tuition Assistance
• Student Loan Repayment
• Paid Licensing / Certification Fees and Renewals
• Financial Rewards for Obtaining Licensure
• Employee Referrals
• Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.)
• Dependent Care Match

'Atwell'ness:

• Medical (BC/BS), Dental (Delta), and Vision (VSP)
• Family Planning & IVF Benefits
• Pet Insurance
• Health Savings Account & Flex Spending Account options
• Employer paid LTD, STD, and life insurance
• Metlife Supplemental Benefits covering accident, hospitalization, and critical illness
• Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services