Electrical Engineer: Power Systems

Voya Energy; Hayward (CA); On-site; USD 120,000 - 180,000; Full time

Benefits offered by this job

Equity compensation

Job summary

Voya Energy in Hayward, CA is seeking a Senior Power Systems Engineer to own the design, build and test of the power system architecture for our metal-fueled generator technology. You will orchestrate the interface between generator, battery storage, local load, and grid, emphasizing fast prototyping and robust hardware.

The role requires deep hands-on experience in hybrid inverters, high-power electronics, thermal management and end-to-end development, from trade studies to production, within a

Qualifications

• Bachelor’s degree or higher in Electrical Engineering or related field.
• 7+ years of relevant industry experience in system-level power electronics.
• Direct experience with High Power (25-250kW) Hybrid Inverters and DC-DC conversion.
• Familiarity with AC switching/transfer logic and protection coordination.
• Ability to perform "worst-case" analysis and simulations (SPICE/PLECS) to ensure design robustness.
• Proficiency in PCB layout with a focus on DFM (Design for Manufacturing).
• Proficiency in Altium Designer (or similar) with specific experience in high-current/high-voltage layout.
• Proficiency in 3D CAD software (e.g., SolidWorks, NX, or Creo). Demonstrated experience working in PDM and/or PLM environments.
• Expert-level use of PLECS, PSIM, or MATLAB/Simulink to simulate power stages and control loops before building hardware.
• Demonstrated knowledge of UL 1741 and IEEE 1547.
• Hands‑on experience with heat sink sizing, fan selection, and thermal interface materials to keep the system stable under load and operating environment requirements.
• Demonstrated firmware experience, specifically C/C++ for microcontrollers to ensure the hardware and software are aligned.
• Experience with development testing, failure analysis, and debugging complex systems. The successful candidate will own and drive documentation and configuration management.
• Comfortable working in an environment based on accountability: scope, schedule, budget, 2-way feedback and collaboration.

Responsibilities

• Design, build, and test the power system architecture for metal-fueled generator tech.
• Develop hybrid inverter, converter, switches, and BMS architectures for rapid prototyping.
• Design switching logic to power onsite load from hybrid system or grid.
• Model energy flow and transitions between generator, battery, and grid.
• Source components across vendors to shorten lead times.
• Collaborate with mechanical, controls, and data teams; support testing and validation.
• Create electrical schematics and ensure adherence to safety standards.
• Document procedures for new equipment and systems.

Skills

Electrical engineering

Power electronics

Hybrid inverters

PCB layout

Altium Designer

3D CAD (SolidWorks/NX/Creo)

MATLAB/Simulink

Thermal management

System-level design

Controls & firmware (C/C++)

Education

Bachelor's degree in Electrical Engineering

Tools

Altium Designer

SolidWorks/NX/Creo

MATLAB/Simulink

Job description

Voya Energy is commercializing a groundbreaking metal-based fuel to rapidly deploy reliable, clean, affordable electricity anywhere on Earth.

Our breakthrough technology allows us to convert abundant, high-energy, recycled metals into a powerful, safe, durable fuel. We are also creating a foundational new category of energy generation devices, delivering fast access to power - free from the limitations of the grid.

We are assembling a highly-experienced team of visionary founders, tenacious researchers, multi-disciplinary first principles engineers, battle-tested operators and world-class investors to deliver on Voya’s ambitious mission.

Join us in fueling our electric future.

Position Summary

Voya Energy is seeking a highly skilled and motivated Senior Power Systems Engineer to take ownership of the design, build, and test of the power system architecture essential to the development and scaling of our metal-fueled generator technology. You will be responsible for the architecture that manages power flow between the generator, the battery storage, the local load, and the utility grid—including a switching solution that allows the grid to take over the load seamlessly when desired. The ideal candidate has a hands-on approach based on engineering first principles and industry experience, a deep understanding of hybrid inverters and converters, and demonstrated experience in bringing hardware (components, sub-assemblies, top-level assemblies) through a complete workflow: conceptual trades/design, performance prediction/analysis, development testing iteration and eventually to production. Collaboration with mechanical, fluids, automation, data and controls is essential.

Responsibilities:

• Rapid Development: Design and bring up the Hybrid Inverter, converter, switches and battery management system architectures with a focus on speed-to-prototype.
• Load & Grid Management: Design the switching logic and hardware to allow the onsite AC load to be powered by either the hybrid system or the grid.
• Intelligent Power Flow: Build the "charge-and-switch" logic, ensuring the system can buffer energy from the generator and manage the transition between battery, generator, and grid power.
• Practical Architecture: Source components from multiple vendors to avoid long lead times. You prefer "available now" over "perfect in six months."
• Hardware-Mechanical Synergy: Use your mechanical aptitude to ensure electronics fit physical constraints, accounting for thermal management and ruggedized packaging.
• Small Team Collaboration: Thrive in a tight-knit environment where you help define requirements for software and mechanical peers to move the whole project forward. Directly support design, test readiness and test data reviews.
• Testing & Validation: Develop test plans and perform development testing for verification and validation of assemblies.
• Create and maintain system electrical schematics.
• Adhere to relevant safety standards.
• Document assembly and operating procedures for new equipment and systems.

Qualifications:

• Bachelor’s degree or higher in Electrical Engineering or related field.
• 7+ years of relevant industry experience in system-level power electronics.
• Direct experience with High Power (25-250kW) Hybrid Inverters and DC-DC conversion.
• Familiarity with AC switching/transfer logic and protection coordination.
• Ability to perform "worst-case" analysis and simulations (SPICE/PLECS) to ensure design robustness.
• Proficiency in PCB layout with a focus on DFM (Design for Manufacturing).
• Proficiency in Altium Designer (or similar) with specific experience in high-current/high-voltage layout.
• Proficiency in 3D CAD software (e.g., SolidWorks, NX, or Creo). Demonstrated experience working in PDM and/or PLM environments.
• Expert-level use of PLECS, PSIM, or MATLAB/Simulink to simulate power stages and control loops before building hardware.
• Demonstrated knowledge of UL 1741 and IEEE 1547.
• Hands‑on experience with heat sink sizing, fan selection, and thermal interface materials to keep the system stable under load and operating environment requirements.
• Demonstrated firmware experience, specifically C/C++ for microcontrollers to ensure the hardware and software are aligned.
• Experience with development testing, failure analysis, and debugging complex systems. The successful candidate will own and drive documentation and configuration management.
• Comfortable working in an environment based on accountability: scope, schedule, budget, 2-way feedback and collaboration.
• Familiar with modern engineering collaboration toolsets: Confluence, Slack, Asana, etc.
• Demonstrated experience reading electrical schematics/drawings.
• Demonstrated ability to operate in a fast-paced, start-up environment. Hands‑on and biased towards action.

Location:

Hayward, CA. Full-time on-site.

Salary & Benefits:

• Competitive salary and equity compensation commensurate with experience