Electrical Engineer II - RCP Digital Hardware (Onsite)

Collins Aerospace; Cedar Rapids (IA); On-site; USD 69,000 - 131,000; Full time

Benefits offered by this job

Medical, dental, and vision insurance

Three weeks of vacation

Generous 401(k) plan

Tuition reimbursement program

Student Loan Repayment Program

Life insurance and disability coverage

Employee Assistance Plan

Relocation assistance

And more!

Job summary

Collins Aerospace in Cedar Rapids, IA is seeking a Hardware Electrical Engineer II to advance high-speed digital circuit design for mission-critical communications in defense programs. You will handle lifecycle tasks from requirements to PCB layout, validation, and integration, collaborating with a multidisciplinary team.

The ideal candidate has experience in schematic capture and PCB design, a STEM degree, and the ability to obtain/maintain a DoD security clearance.

Qualifications

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field.
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
• Familiarity with schematic capture and PCB layout tools is expected for circuit card designs.

Responsibilities

• You will perform circuit card design lifecycle activities including requirements capture, schematic capture, design documentation, signal integrity analysis, creation of board stackup and routing instructions, coordination and review of printed wiring board layout, creation of test plans, root cause analysis, test, and integration.
• You will design, document, verify, support, test and troubleshoot digital hardware for communication products using electrical engineering principles and techniques. Designs may include the use of FPGA, processors, and DDR memory components, and industry interfaces, such as Ethernet, I2C, SPI, and UART.
• You will collaborate with a multi-discipline team of Engineers to develop proven hardware designs that meet system performance and operational specifications
• You will contribute to new product development, as well as both engineering and production test hardware that include circuit card assemblies (CCAs), test fixtures, test interface adapters, cabling

Skills

Schematic capture

PCB layout

Security clearance

Education

STEM degree

Advanced degree

Tools

Siemens/Mentor Graphics Xpedition

Altium

Cadence Allegro

EAGLE

KiCAD

Job description

Date Posted

2026-08-20

Country

United States of America

Location

US-IA-CEDAR RAPIDS-137 ~ 855 35Th St NE ~ BLDG 137

Position Role Type

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements

The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type

DoD Clearance: Secret

Security Clearance Status

Active and existing security clearance required after day 1

The Resilient Connectivity Products (RCP) Hardware Technologies team is seeking a Hardware Electrical Engineer II to help develop the next generation of advanced communication systems. In this role, you will contribute to high-speed digital electronics that power mission-critical communication products supporting the defense of our nation—including advanced software-defined radios and data links used across ground, airborne, and space platforms.

We are looking for a driven and curious Electrical Engineer with a passion for digital circuit card design and a desire to work on technologies that operate in some of the most demanding aerospace environments. In this role, you will support the full lifecycle of circuit card development—from requirements and schematic capture through PCB layout, build, integration, testing, and final design verification in the lab.

The ideal candidate is motivated, collaborative, and detail-oriented, with a strong foundation in electrical circuits and PCB design. You’ll work closely with a multidisciplinary team of engineers and program partners, helping deliver innovative, reliable solutions that enable resilient connectivity for critical missions.

Potential Locations

• Cedar Rapids, IA

• Fort Wayne, IN

What You will do

• You will perform circuit card design lifecycle activities including requirements capture, schematic capture, design documentation, signal integrity analysis, creation of board stackup and routing instructions, coordination and review of printed wiring board layout, creation of test plans, root cause analysis, test, and integration.

• You will design, document, verify, support, test and troubleshoot digital hardware for communication products using electrical engineering principles and techniques. Designs may include the use of FPGA, processors, and DDR memory components, and industry interfaces, such as Ethernet, I2C, SPI, and UART.

• You will collaborate with a multi-discipline team of Engineers to develop proven hardware designs that meet system performance and operational specifications

• You will contribute to new product development, as well as both engineering and production test hardware that include circuit card assemblies (CCAs), test fixtures, test interface adapters, cabling

What You Will Learn

• Take the steps to become a subject matter expert in the domain area of high-speed digital design.

• Gain hands on experience with technologically advanced communication/radio hardware in production that will help propel your career.

• This role will help you broaden your knowledge and opens the door to many possibilities – becoming a leader, promotional opportunities, and direct interfacing with customers. We are growing so can you.

Qualifications You Must Have

• Prior experience with schematic capture of electrical circuit designs and PCB layout. Includes familiarity with a schematic capture tool (examples may include Siemens/Mentor Graphics Xpedition, Altium, Cadence Allegro, EAGLE, KiCAD, etc.) for creation of circuit card designs.

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Experience with electrical designs that contain digital electronics such as processors, FPGAs, high-speed transceivers, DDR, and flash memories.

• Experience with generating Printed Wiring Board (PWB) layout constraint guidelines and overseeing the routing, layout, fabrication, and assembly of the design

• Experience with using Hyperlynx(or similar)for performing signal integrity and timing analyses for creation of robust circuit card designs.

• Familiarity with Commercial Off The Shelf (COTS) Test Equipment, such as oscilloscopes, multimeters, logic analyzers, spectrum analyzers, signal generators, power supplies, etc.

• Familiarity with designing and integratingcircuit cards,test fixtures,and/orcables.

• Experience with Agile for Hardware Development, including planning, tracking, and managing hardware development projects in JIRA is a plus.

What We Offer

Some of our competitive benefits package includes:

• Medical, dental, and vision insurance

• Three weeks of vacation for newly hired employees

• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option

• Tuition reimbursement program

• Student Loan Repayment Program

• Life insurance and disability coverage

• Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance,critical illnessinsurance, group legal, ID theft protection

• Birth, adoption, parental leave benefits

• Ovia Health, fertility, and family planning

• Adoption Assistance

• Autism Benefit

• Employee Assistance Plan, including up to 10 free counseling sessions

• Healthy You Incentives, wellness rewards program

• Doctor on Demand, virtual doctor visits

• Bright Horizons, child and elder care services

• Teladoc Medical Experts, second opinion program

• This role may be eligible for relocation

• And more!

Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions — whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you’ll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today.

*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attendselect steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms