Electrical and Instrumentation Apprenticeship

Domtar Corporation; Nekoosa (WI); On-site; USD 21,000 - 28,000; Full time

Job summary

Domtar Corporation's Nekoosa, Wisconsin facility offers an Electrical and Instrumentation Apprenticeship. This full-time, permanent program trains apprentices to support mill machinery, electrical systems, and instrumentation under supervision of journeymen.

Duties include aiding repairs, maintenance, installation, testing, and configuring controls, while upholding NFPA70 rules and safe work practices. A Wisconsin driver’s license and respirator fit test are required.

Qualifications

• Apprentices must be able to physically perform job duties.
• Must pass respirator fit test and have a valid Wisconsin Driver’s License.
• Must meet established test standards and have a good safety and attendance record.
• On-the-job requirements include lifting 50–100 pounds regularly; ability to work in high places.

Responsibilities

• Assist journeymen with repairs, maintenance, and installation of mill machinery and related equipment.
• Maintain environmental systems and power generating equipment as required.
• Inspect, test, and troubleshoot electrical/instrumentation equipment and related controls.
• Plan layouts, run conduit, wiring and tubing for both new and existing installations.

Skills

Physical ability

Education

Associate degree in Electrical Power / Electronics / Instrumentation or equivalent core education

Job description

Select how often (in days) to receive an alert:

Electrical and Instrumentation Apprenticeship

Location:
Nekoosa, WI, US, 54457

Department: Maintenance (MN00)

Domtar is a leading producer of pulp, paper, packaging, tissue and wood products. Through our focus on safety and sustainability, as well as our commitment to operational excellence and our network of facilities across Canada and the United States, Domtar delivers high-quality and cost-effective products to customers around the world.

Our workforce is comprised of 14,000 talented and hardworking individuals. We are proud to offer competitive compensation, a supportive working environment, rewarding career paths and plenty of opportunities for learning and growth.

The location in Nekoosa, (Wisconsin, United States), is seeking talent to fill the position of Electrical and Instrumentation Apprenticeship. This job is full-time permanent.

DUTIES

• Apprentices will assist journeymen with repairs, maintenance, and installation of mill machinery and related equipment, as well as provide help with locating, determining, and repairing electrical/instrumentation malfunctions.
• Apprentices will maintain environmental systems and power generating equipment as required and assist other crafts when working together on a job.
• Other duties of the apprentice include: assisting journeymen when working on medium and high voltage equipment, inspecting and testing electrical/instrumentation equipment as required, installing pneumatic, electronic, and other instrumentation equipment, disassembling malfunctioning equipment, examining and testing mechanisms and circuitry for defects, operate distributive controls and configure controllers for required troubleshooting, assist with planning layouts, running conduit, wiring and tubing for both new and existing installations.
• Apprentice must conform to all NFPA70 rules and regulations, perform general housekeeping duties, and perform other duties as assigned by supervision.

QUALIFICATIONS

• Apprentices must be able to physically perform job duties.
• Apprentices will need to pass a respirator fit test and be clean shaven where the sealing surface of the respirator contacts the face, and have a valid Wisconsin Driver’s License.
• Apprentices must meet established test standards (Nowlin test standards for mechanical aptitude) and have a good work record, strong work ethic, and have good safety and attendance records.

PREFERRED QUALIFICATIONS

• An Associate Degree in Electrical Power, Electronics, Computer Engineering or Instrumentation areas OR equivalent core eduction of post high school Intermediate Algebra or Trigonometry, post high school Physics, post high school Mechanical Drafting/Blueprint reading, post high school training in hydraulics, OR equivalnt work experience in field.

ON-THE-JOB REQUIREMENTS

• Apprentices must successfully complete the State Indentured Electrical/Instrumentation Apprenticeship Program with classroom and on-the-job related instruction.
• Apprentices must be able to lift 50-100 pounds regularly. Examples include: drives, motors, unistrut, valves, piping, power bar, etc. Apprentices must do a considerable amount of bending, stooping, reaching, turning, and twisting and must be able to climb and work in high places. Examples include: 8 foot to 60 foot elevated lifts, ladders, cherry pickers, and manlifts.
• Apprentices must work safely around moving machinery and work in confined places, and they must also work safely with hazardous materials such as: corrosive acids, chlorates, polymers, gases, etc. Apprentices will work in extremely hot areas and must wear protective equipment and clothing when required.
• Apprentices must also learn to operate and use power equipment such as: saws, drills, planers, threaders, etc., and must have the ability to read blueprints, schematics and PID diagrams.
• All maintenance employees are expected to respond to call-ins, work shift work, overtime, Sunday’s and holidays as required.

Domtar is an equal-opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status. We are also committed to ensuring reasonable accommodations for individuals protected by Section 503 of the Rehabilitation Act of 1974, and Title I of the Americans with Disability Act of 1990.