Electrical and Controls Technician - 2nd & 3rd shift

Rfc Llc - Dba Roll Forming Corporation

Jeffersonville (IN)

On-site

USD 34,000 - 55,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Health insurance options
401K / 401K Roth
Quarterly profit-sharing bonus
Leadership training opportunities
Volunteer program (TogetherWeCare)
Environmental initiative (Countdown to

Job summary

Roll Forming Corporation is seeking an Electrical and Controls Technician to install, maintain, program, and troubleshoot electrical controls and automation systems on the Jeffersonville, IN plant floor. You’ll work with PLCs, HMIs, SCADA, motors, servos, robotics, and networked drives, partnering with engineering, maintenance, and production teams to keep manufacturing moving.

The role emphasizes hands-on problem solving, documentation, training, and adherence to safety standards, with 2nd/3rd

Qualifications

  • Associate degree in Electrical Engineering, Automation Technology, or related field.
  • Experience as a controls technician or in a manufacturing setting.
  • Hands-on PLC programming with Allen-Bradley or Siemens platforms.
  • Experience with robotics, HMI, and SCADA systems.
  • Working knowledge of EtherNet/IP, Modbus, and EtherCAT.
  • Knowledge of motor-drive systems such as PowerFlex, Kinetix, Indramat.
  • Ability to read electrical, hydraulic, and pneumatic schematics.
  • Strong troubleshooting, root-cause analysis, and teamwork skills.
  • Proficiency with Microsoft Excel, Word, PowerPoint, and Outlook.

Responsibilities

  • Install, configure, program, and maintain control systems (PLCs, HMI software, motors, servos, robots).
  • Diagnose and repair electrical and control-system issues to minimize downtime.
  • Perform preventive maintenance and routine inspections on control equipment.
  • Collaborate with engineering, maintenance, and production teams to improve efficiency, quality, and reliability.
  • Document system modifications, maintenance work, and SOPs.
  • Train employees on control-system operation and best practices.
  • Support the development of project specifications and timelines.
  • Maintain compliance with applicable safety requirements and industry standards.

Skills

PLC programming
Robotics
HMI / SCADA systems
Electrical troubleshooting
Schematics reading
Industrial networking
Teamwork
Microsoft Office

Education

Associate degree in Electrical Engineering / Automation Technology

Tools

Allen-Bradley PLCs
Siemens PLCs
HMI software
SCADA systems
PowerFlex
Kinetix
Indramat
EtherNet/IP
Modbus
EtherCAT

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Electrical and Controls Technician - 2nd & 3rd shift

Roll Forming Corporation - IN, Jeffersonville, IN, US

1 Attachments

Seeking 2nd & 3rd Shift engineering technicians to support the installation, maintenance and troubleshooting of electrical controls and automation systems - based out of our Jeffersonville, IN plant. Ideal candidates will enjoy solving technical issues and working with team members in a manufacturing setting.

Build the Automation Systems That Keep Manufacturing Moving

Roll Forming Corporation is seeking a hands-on Electrical and Controls Technician to join our Corporate Engineering team. In this role, you will install, maintain, program, and troubleshoot electrical controls and automation systems that support safe, reliable, and efficient manufacturing operations. You will work directly on the production floor with PLCs, HMIs, SCADA systems, motors, servos, robotics, and related technologies while partnering with engineering, maintenance, and production teams.

What You’ll Do
  • Install, configure, program, and maintain control systems, including PLCs, HMI software, motors, servos, robots, and related automation equipment.
  • Diagnose and repair electrical and control-system issues to minimize production downtime.
  • Perform preventive maintenance and routine inspections on control equipment.
  • Collaborate with engineering, maintenance, and production teams to implement solutions that improve efficiency, quality, and reliability.
  • Document system modifications, maintenance work, and standard operating procedures.
  • Train employees on control-system operation and best practices.
  • Support the development of project specifications and timelines.
  • Maintain compliance with applicable safety requirements and industry standards.
What You Bring
  • An associate degree in Electrical Engineering, Automation Technology, or a related field.
  • Experience as a controls technician or in a similar manufacturing role.
  • Hands-on PLC programming experience, particularly with Allen-Bradley or Siemens platforms.
  • Experience with robotics, automation, HMI, and SCADA systems.
  • Working knowledge of industrial network protocols such as EtherNet/IP, Modbus, and EtherCAT.
  • Knowledge of motor-control drives and motion systems, including PowerFlex, Kinetix, or Indramat.
  • Understanding of electrical safety devices, redundant wiring, test pulses, and lockable switches.
  • Ability to read electrical, hydraulic, and pneumatic schematics.
  • Strong troubleshooting, root-cause analysis, communication, and teamwork skills.
  • Proficiency with Microsoft Excel, Word, PowerPoint, and Outlook, with the ability to learn new software tools.
Preferred Experience

Knowledge of Beckhoff PLCs, Indramat systems, Motoman robotics, or Ignition MES software is a strong plus.

Why Join Us?
  • Career growth opportunities, including progression to Technician II and Engineer roles.
  • Tuition-reimbursement and certification opportunities.
  • Leadership development and involvement in special projects.
  • A collaborative role with direct impact on manufacturing performance and continuous improvement.
  • Schedule: Hours will be 2nd shift Monday - Friday 3pm to 11:30pm with overtime as needed. 3rd shift hours are Monday - Friday 11PM to 7AM with overtime as needed. Some training may occur on other shifts.
  • Work location: Onsite in Jeffersonville, Indiana.
  • Travel: Generally not required; occasional travel for training or projects may be necessary, up to 10%.
  • Physical demands: Regular standing and use of hands; frequent walking, stooping, kneeling, crouching, or crawling; occasional climbing or balancing. Must be able to regularly lift up to 10 pounds, frequently lift up to 25 pounds, and occasionally lift up up to 50 pounds.
  • Work environment: Manufacturing setting with frequent exposure to moving mechanical equipment, fumes or airborne particles, and elevated noise levels.
Eligibility Requirement

Due to export-control requirements, candidates must qualify as a U.S. person under ITAR/EAR regulations, including a U.S. citizen, lawful permanent resident, or protected individual as defined by applicable law.

Ready to Make an Impact?

Bring your controls expertise, problem-solving skills, and commitment to safe manufacturing to Roll Forming Corporation.

Schedule:

  • After successful conclusion of training the hours will be 2nd shift Monday - Friday 3pm to 11:30pm with overtime as needed.

See attached job description for further details.

Who We Are

voestalpine Roll Forming Corporation, or RFC as we call it, supplies custom roll formed metal components into several industries including Aerospace, Construction, Material Handling, Off-Highway, Office Furniture, Solar and Transportation. In 2000, Roll Forming Corporation was acquired by globally leading technology group voestalpine AG and became part of the Metal Forming, Tubes and Sections division. Today, voestalpine Roll Forming Corporation has seven production facilities across three states with five facilities and headquarters located in Shelby County, Kentucky and one facility each in Pennsylvania and Indiana.

What We Offer You
  • Several great benefit plans, including multiple health insurance options, vision, dental, life, short-term and long-term disability coverage, health-saving accounts, or flexible spending account
  • 401K or 401K Roth up to 6% Match
  • Quarterly Profit-Sharing Bonus.
  • Leadership training opportunities
  • TogetherWeCare, a philanthropic volunteer program that allows employees to support their community while on company time
  • Countdown to Zero, a global environmental impact initiative that strives to make our work environments more efficient and environmentally friendly
Work Authorization Requirement

Candidates must be legally authorized to work in the United States without current or future employer sponsorship. RFC is not able to sponsor employment visas for this position.

voestalpine Roll Forming Corporation is an At Will employer. Employment will be at-will, which means that either the employee or the employer may terminate the employment relationship at any time, with or without prior notice, and with or without cause.

Roll Forming Corporation is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. Please contact us at RFC.HR@voestalpine.com if you require any alternate application form or accommodation during our hiring process due to disability.

Attachments (1)

Corporate - Electrical and Controls Engineering Technician (002).pdf

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics and Controls Technician
Electronics and Controls Technician

Roll Forming Corp. • Jeffersonville (IN)

On-site
USD 55,000 - 75,000
Health insurance options
401K / 401K Roth up to 6% match
Profit-Sharing Bonus
+2
Electrical and Controls Technician
Electrical and Controls Technician

voestalpine Roll Forming Corporation • Shelbyville (KY)

On-site
USD 60,000 - 75,000
Health insurance
401K match
Profit-sharing bonus
+3
Electronics Technician II
Electronics Technician II

voestalpine Roll Forming Corporation • Jeffersonville (IN)

On-site
USD 32,000 - 38,000
Weekly pay
Paid time off (PTO)
401K or 401K Roth match
+2
Electronics Technician II
Electronics Technician II

Rfc Llc - Dba Roll Forming Corporation • Jeffersonville (IN)

On-site
USD 32,000 - 38,000
Weekly pay
401K or 401K Roth match
Profit-Sharing Bonus
+1
Manufacturing Technician
Manufacturing Technician

Roll Forming Corp. • Kentucky

On-site
USD 30,000 - 41,000
401K with match
Profit-sharing bonus
Health insurance options
Maintenance Mechanic A - Electrical
Maintenance Mechanic A - Electrical

voestalpine Roll Forming Corporation • Jeffersonville (IN)

On-site
USD 43,000 - 50,000
Health insurance
Weekly pay
401K plan
+5
Maintenance Mechanic A - Electrical
Maintenance Mechanic A - Electrical

Rfc Llc - Dba Roll Forming Corporation • Jeffersonville (IN)

On-site
USD 31,000 - 36,000
Weekly pay
401K+ employer match up to 6%
Profit sharing bonus
+4
Maintenance Mechanic A-Electrical
Maintenance Mechanic A-Electrical

Roll Forming Corp. • Kentucky

On-site
USD 31,000 - 36,000
Weekly pay
401K/401K Roth up to 6% match
Profit-sharing bonus
+4
MES Technician
MES Technician

voestalpine Roll Forming Corporation • Shelbyville (KY)

On-site
USD 60,000 - 85,000
Health benefits
401K
Paid time off
MES Technician
MES Technician

Rfc Llc - Dba Roll Forming Corporation • Shelbyville (KY)

On-site
USD 55,000 - 75,000
Health insurance
401(k) or 401(k) Roth
Paid time off