EFP - Mold Tech

EFP, LLC

Decatur (AL)

On-site

USD 48,000 - 58,000

Full time

9 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Health benefits
Dental benefits
Vision benefits
401(k) plan

Job summary

EFP, LLC in Decatur, AL is seeking a Mold Maintenance Technician to maintain, repair, and install molds and tooling to keep our production running safely, efficiently, and in compliance with quality standards in a manufacturing environment. This first shift (6:00 am–2:30 pm) role requires mechanical aptitude and experience with pneumatic, hydraulic, steam and water systems, plus the ability to follow instructions and work with teams.

Overtime is required when demand is present.

Qualifications

  • Requires a high school diploma or equivalent and 3 years of mechanical experience in an industrial setting.
  • Mechanical aptitude demonstrated through experience or testing.
  • Ability to read, write and perform basic math.
  • Experience with pneumatic, hydraulic, steam, and water systems preferred.
  • Ability to work independently or as part of a team and follow instructions.

Responsibilities

  • Perform mold changes, including building, stripping, installing, and maintaining tooling.
  • Clean molds using manual or high-pressure methods following safety procedures.
  • Set up molds for production and adjust process parameters.
  • Rebuild and maintain mold components (guns, seals).
  • Troubleshoot mold and process issues to uphold product quality.
  • Operate PLC and other control systems for production setup.
  • Complete records for mold changes and maintenance requests.
  • Participate in safety training and 5S initiatives.
  • Support continuous improvement and housekeeping.
  • Perform other duties as assigned.

Skills

Mechanical aptitude
Read/write basic math
Teamwork
Hand tools
Forklift operation
Crane/hoist operation
Follow instructions
Independence / self-motivation

Education

High school diploma or equivalent

Tools

Pneumatic systems
Hydraulic systems
Water systems
PLC interfaces

Job description

The Mold Maintenance Technician is responsible for maintaining, repairing, and installing molds and tooling to support safe and efficient production operations. This role ensures molds are in proper working condition and meet quality standards.

The current opening is for First Shift: Hours 6am - 2:30 pm. Overtime is required when demand is present.

Essential Duties and Responsibilities
  • Perform mold changes, including building, stripping, installing, and maintaining tooling
  • Clean molds manually or with high-pressure equipment following safety procedures
  • Set up molds for production, including replacing seals, guns, and related components and setting process parameters to produce good product
  • Rebuild and maintain mold-related components (i.e., guns, seals)
  • Troubleshoot and resolve mold and process issues to support product quality
  • Operate or interface with control systems (e.g., PLC) to support production setup and adjustments
  • Complete required documentation, including mold change records and maintenance logs requests for parts
  • Participate in all required training, including safety and operational policies
  • Participate in continuous improvement and workplace organization initiatives (e.g., plant-wide 5S / housekeeping)
  • Perform other duties as assigned
Qualifications
  • High school diploma or equivalent preferred along with 3 years’ mechanical experience in an industrial setting
  • Mechanical aptitude demonstrated through experience or testing
  • Basic to intermediate reading, writing, and math skills
  • Experienced in pneumatic (air), steam, hydraulic and water systems preferred
  • Ability to follow written and verbal instructions and work independently or as part of a team
  • Ability to use hand tools both manually and pneumatically driven
  • Ability to operate a powered industrial truck
  • Ability to operate cranes/hoists
Physical Requirements

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job, with or without reasonable accommodation:

  • Ability to stand, walk, sit, climb, balance, and perform repetitive motions
  • Frequent lifting and carrying up to 35 lbs.
  • Pushing/pulling up to 40 lbs.
  • Frequent bending, stooping, crawling, crouching and reaching
Work Environment & Safety
  • Work is performed in a manufacturing environment with exposure to moving machinery, heat/cold extremes, moderate noise levels, pressurized systems, and industrial equipment
  • Required to comply with all OSHA standards, company safety policies, and required use of personal protective equipment (PPE)
Additional Requirements
  • Ability to work a minimum of 40 hours per week, with additional hours as needed to support operation
Company Overview

An industry leader in providing practical solutions to foam molding and fabrication, EFP has a diversified product offering and serves the pharmaceutical, biotech, medical, automotive, recreational vehicle, appliance, plumbing, consumer goods, and building and construction industries. The company is headquartered in Elkhart, Indiana and has manufacturing locations in Elkhart, Indiana, Evansville, Indiana, Decatur, Alabama, Nashville, Tennessee, Casa Grande, AZ and Bishopville, SC.

EFP can design, mold, fabricate and provide fulfillment capabilities, kitting, assembly, custom systems, and inventory management. Nashville is also home to the company’s Temperature Solutions Center of Excellence.

For more than 40 years, EFP LLC has been owned by J.B. Poindexter & Co., Inc., a privately held, diversified manufacturing company with operating subsidiaries throughout North America. In addition to expanded foam products, these companies produce commercial van bodies, step vans, funeral coaches, limousines, pick-up truck bed enclosures and tonneau covers, and precision machined components. The size and strength of the Poindexter companies provides EFP with the leadership and resources to stay on the leading edge in today’s marketplace. Because of this, EFP can provide our customers with groundbreaking packaging and component solutions.

For more information about our company, access EFP's web site at www.efppackaging.com.

EFP offers a competitive wage and comprehensive benefits. EFP’s benefits package includes Health, Dental, Vision, Life, STD, LTD, FSA, HSA, and 401(k) Plan with company contributions.

EFP is an Equal Opportunity Employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

EFP - Mold Tech
EFP - Mold Tech

J.B. Poindexter & Co. • Decatur (AL)

On-site
USD 28,000 - 39,000
EFP - Bishopville - Maintenance/Machinist Technician
EFP - Bishopville - Maintenance/Machinist Technician

J.B. Poindexter & Co. • South Carolina

Hybrid
USD 42,000 - 60,000
Health
Dental
Vision
+6
EFP - Bishopville - Maintenance/Machinist Technician
EFP - Bishopville - Maintenance/Machinist Technician

EFP, LLC • Bishopville (SC)

On-site
USD 42,000 - 60,000
Health
Dental
Vision
+6
EFP - Bishopville - Maintenance/Machinist Technician
EFP - Bishopville - Maintenance/Machinist Technician

EFP, LLC. • Bishopville (SC)

On-site
USD 28,000 - 41,000
Health benefits
Dental benefits
Vision benefits
+5
Maintenance Machinist: Precision Tooling & Repairs
Maintenance Machinist: Precision Tooling & Repairs

J.B. Poindexter & Co. • South Carolina

Hybrid
USD 42,000 - 60,000
Health
Dental
Vision
+6
Team Lead - Casa Grande, AZ
Team Lead - Casa Grande, AZ

EFP, LLC. • Casa Grande (AZ)

On-site
USD 60,000 - 85,000
Production Team Member - EFP, LLC
Production Team Member - EFP, LLC

EFP, LLC • La Vergne (TN)

On-site
USD 26,000 - 28,000
Competitive wage
Comprehensive benefits
10 paid holidays + PTO
Team Lead - Casa Grande, AZ
Team Lead - Casa Grande, AZ

J.B. Poindexter & Co. • Casa Grande (AZ)

On-site
USD 55,000 - 85,000
Medical
Dental
Vision
+6
Team Lead - Casa Grande, AZ
Team Lead - Casa Grande, AZ

Efp, Llc • Casa Grande (AZ)

On-site
USD 65,000 - 80,000
Medical
Dental
Vision
+6
General Production - Packer/Tender 1st/2nd Shift - Casa Grande, AZ
General Production - Packer/Tender 1st/2nd Shift - Casa Grande, AZ

Efp, Llc • Casa Grande (AZ)

On-site
USD 21,000 - 28,000
Health benefits
Dental benefits
Vision benefits
+2