Director, Configuration Management & Technical Data Management

TerraPower LLC.; Bellevue (WA); On-site; USD 196,000 - 261,000; Full time

Benefits offered by this job

Competitive compensation

Short-term incentive payments

401k plan

Medical, vision, dental, life benefits

Generous PTO

Relocation assistance

Job summary

TerraPower LLC is seeking a Director of Configuration Management and Technical Data Management to lead CM/TDM across Natrium project configurations. You will own baselines, change control, and data lifecycle processes in collaboration with QA and Design Authority to ensure design-control rigor.

The role requires on-site presence four days per week and leadership over CM and TDM teams, with strong emphasis on regulatory compliance and cross-functional collaboration to deliver complex nuclear

Qualifications

• 15+ years in nuclear or highly regulated engineering environments.
• Deep knowledge of ASME NQA-1 (Requirement III and Part II).
• Experience leading CM/TDM teams and processes.

Responsibilities

• Own CM and TDM for Natrium project configurations and baselines.
• Define CM/TDM interfaces with document-control and QA design authority.
• Drive data-driven improvements using CMIS, EDMS, and records workflows.
• Ensure alignment with NQA-1 and licensing requirements across projects.
• Lead cross-functional teams to standardize CM/TDM practices.

Skills

Configuration Management

Technical Data Management

Leadership

Cross-functional Collaboration

QA & Compliance

Project Management

Education

Bachelor's degree in engineering or related technical discipline

Tools

CMIS/PLM systems

EDMS

Job description

Director, Configuration Management & Technical Data Management

Bellevue, Washington, United States

TerraPower is a nuclear technology company based in Bellevue, Washington. At its core, the company is working to raise living standards globally through a more affordable, secure, and environmentally friendly form of nuclear energy along with innovations in medical isotopes to improve human health. In 2006, TerraPower originated with Bill Gates and a group of like-minded visionaries who evaluated the fundamental challenges to raising living standards around the world. They recognized energy access was crucial to the health and economic well-being of communities and decided that the private sector needed to take action and create energy sources that would advance global energy deployment. TerraPower’s mission is to be a world leader in new nuclear technologies, while developing innovators and future leaders in the nuclear field. As a result, the company’s activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications – all for significant human health benefits.

TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. TerraPower is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law.

Natrium Director of Configuration Management and Technical Data Management

TerraPower is seeking a Director of Configuration Management (CM) and Technical Data Management (TDM) to lead Natrium’s CM/TDM strategy and execution across multiple project configurations and the standard plant design. Reporting to the Director of Engineering Strategy and Integration, this role owns configuration control, configuration structures and naming, and the technical data lifecycle that underpins Natrium’s design‑control rigor and execution. The position ensures CM/TDM alignment with ASME NQA‑1 Requirement III through collaboration with QA and Design Authority. Senior Managers reporting to this role oversee Configuration Management and Technical Data Management.

As TerraPower rapidly scales and Natrium accelerates toward major design, licensing, and construction milestones, this is a high‑impact opportunity to shape how engineering information flows, how teams align, and how first‑of‑a‑kind nuclear technology is delivered across a portfolio of projects.

This role requires on‑site presence four days per week.

Key Responsibilities

• Own Natrium’s configuration‑control processes and support alignment of CM/TDM deliverables with NQA‑1 Requirement III in collaboration with QA and Design Authority.


• Architect and evolve Natrium’s configuration‑management structures and naming conventions, and guide CM/TDM standards and continuous‑improvement activities, while Senior Managers oversee day‑to‑day CM and TDM execution.


• Ensure configuration baselines and change‑control records align with design‑control expectations across CMIS, EDMS, and records workflows.


• Partner with QA, Design Authority, Licensing, and Program/Project Engineering to specify and verify CM/TDM requirements in program deliverables and reviews supporting ASME NQA‑1 and 10 CFR 50 Appendix B compliance.


• Define CM/TDM expectations to support construction, commissioning, and operations, with execution owned by project, EPC, and operations teams.


• Set and maintain the CM/TDM interfaces with document‑control and QA/Design Authority design‑control expectations, with Senior Managers coordinating implementation across TerraPower, EPCs, suppliers, and partners.


• Drive data‑driven improvement in CM/TDM using Condition Report data, rework data, and process‑adherence insights.

Leadership Responsibilities

• Lead and develop the Configuration Management and Technical Data Management organization, including Senior managers.


• Drive cross‑functional alignment with QA, Design Authority, Licensing, Project Engineering, and EPC partners to ensure cohesive CM/TDM standards and practices.


• Champion TerraPower’s guiding principles through a strong safety, quality, and accountability culture.


• Drive standardization and feedback to and from a standard plant configuration as we deliver multiple projects.

Key Qualifications and Skills

• Bachelor’s degree in engineering or related technical discipline.


• 15+ years in nuclear or highly regulated engineering environments.


• Deep knowledge of ASME NQA‑1 (Requirement III and Part II).


• Demonstrated leadership in configuration management (baselines, change‑control, structures/naming) and technical data management (EDMS/records, metadata).


• Experience with EDMS, CMIS/PLM systems, including developing CM/TDM data structures and records architectures.


• Strong cross‑functional leadership and stakeholder communication skills.


• Experience managing CM/TDM teams or process‑owner organizations aligned with traceability, baselining, and data‑lifecycle requirements.


• Familiarity with configuration management practices, document/records control systems, and CM/TDM interfaces to design‑control expectations.


• Experience supporting audits, regulator reviews, and ASME/NQA‑1 compliance assessments through configuration‑control and technical‑data evidence.


• Strong communication skills with ability to influence cross‑functional leadership.


• Experience developing CM Plans, metadata and numbering standards, workflow RACIs, and CM/TDM procedures.


• The successful candidate will possess a high degree of trust and integrity, communicate openly and display respect and a desire to foster teamwork.

Preferred Qualifications

• Prior director or senior manager experience in configuration management, technical data management, or nuclear QA.


• Experience with FOAK nuclear plant design or advanced reactor programs.


• Working knowledge of ASME Section III and how CM/TDM interfaces with qualification of engineering/analysis software under NQA‑1.


• Experience integrating CM/TDM workflows with project management and multi‑partner collaboration frameworks.


• Familiarity with how CM/TDM baselines and records support applicability/licensing evaluation processes (e.g., 50.59‑like frameworks).


• Experience guiding EPCs, suppliers, or partners in implementing CM/TDM deliverables, turnover data requirements, and configuration‑control expectations.

This position is subject to qualification requirements in accordance with ANSI/ANS 3.1. Candidates must meet the minimum education and experience criteria applicable to the role, including relevant nuclear industry experience where required. Verification of data will be part of the hiring process.

Job Functions are physical actions and/or working conditions associated with the position. These functions may also constitute essential functions for the job which the employee must be able to fulfill, with or without accommodation. Information provided below is to help describe the job so that the applicant has a reasonable understanding of the job duties/expectations. An applicant's ability to perform and/or tolerate these actions and conditions will be discussed and workplace accommodations may be made on a case‑by‑case basis following an individualized assessment of the applicant and other considerations, including but not limited to any governing safety standards.

• Motor Abilities: Sitting for extended periods, bending/stooping, grasping/gripping, fine motor control (hands)


• Physical exertion and/or requirements: Minimal, with ability to safely lift up to 25 pounds.


• Special Senses: Visual and audio focused work


• Work Conditions: Stairs, typing/keyboard, standard and/or sitting working environment of >8 hours/day


• Travel required 0-10%

TerraPower’s technology is controlled for export by various agencies of the U.S. Government. TerraPower must evaluate applicants who are foreign nationals (other than asylees, refugees, or lawful permanent residents) in accordance with U.S. Government export control requirements. To facilitate TerraPower’s export control reviews, you will be asked as part of the application process to identify whether you are a U.S. Citizen or national, asylee, refugee, or lawful permanent resident of the United States. Government export authorization approval times vary. Based on the business needs for a particular position, TerraPower may not consider a foreign national from a country if it is impracticable to obtain timely Government export approval.

Job details

Salary Range: $195,826 – $261,101

Any salary offered within the posted salary band is based on market data and commensurate with the selected candidate’s qualifications and experience. This range is specific to Washington State.

Job Type: Full-time

• Competitive Compensation


• Salary, eligible to participate in discretionary short-term incentive payments


• Comprehensive Medical and Wellness Benefits
  
  
  
  • Medical
  
  
  • Vision
  
  
  • Dental
  
  
  • Life and Disability
  
  
  • Gender Affimation Benefits
  
  
  
  


• 401k Plan


• Generous Paid Time Off (PTO)
  
  
  
  • 21 days of annually accrued PTO
  
  
  
  


• Generous Holiday Schedule
  
  
  
  • 10 paid holidays
  
  
  
  


• Relocation Assistance


• Professional and Educational Support Opportunities

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in TerraPower LLC.’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows :

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305

Page 1 of 1

OMB Control Number 1250-0005

Expires 07/31/2029

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your "major life activities." If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

• Alcohol or other substance use disorder (not currently using drugs illegally)


• Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS


• Blind or low vision


• Cancer (past or present)


• Cardiovascular or heart disease


• Celiac disease


• Cerebral palsy


• Deaf or serious difficulty hearing


• Diabetes


• Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders


• Epilepsy or other seizure disorder


• Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome


• Intellectual or developmental disability


• Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD


• Missing limbs or partially missing limbs


• Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports


• Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)


• Neurodivergence, for example, attention‑deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities


• Partial or complete paralysis (any cause)


• Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema


• Short stature (dwarfism)


• Traumatic brain injury

Public Burden Statement: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

The application deadline for this role is September 23, 2026