Design Engineer, UAS Programs

Archer Technologies

San Jose (CA)

In loco

USD 172.000 - 230.000

Tempo pieno

14 giorni+

Aumenta le possibilità di ricevere una risposta da questo datore di lavoro

Il tuo curriculum e una lettera di presentazione personalizzati, che corrispondono esattamente a ciò che sta cercando.

Supera i filtri ATS

Vantaggi offerti da questo lavoro

Visa sponsorship
Reasonable accommodations
Equal Opportunity employer

Descrizione del lavoro

Archer Technologies, headquartered in Silicon Valley, California, seeks an engineer to own the full lifecycle of prototype aircraft structures—from concept to first flight hardware. You’ll design, analyze, build, test, and iterate with a small team, partnering with technicians and cross‑functional engineers to integrate systems.

You’ll lead 3D CAD development, perform hand and FEA analyses, and oversee manufacturing sequences on the production floor, ensuring repeatable quality and timely

Competenze

  • Bachelor’s degree in mechanical engineering, aerospace engineering, or a closely related field.
  • 6+ years of hands‑on experience in aerospace or aviation.
  • Experience on prototype, experimental, or first‑of‑a‑kind aircraft or flight vehicles.
  • Experience across the full lifecycle of a structure: design, analysis, manufacturing, and test.
  • Hands‑on composite experience, including design, layup, tooling, and bonded or fastened joints.
  • Proficiency in 3D CAD (SolidWorks, CATIA, NX, Creo, or similar) and producing engineering drawings.
  • Structural analysis experience with Nastran, Abaqus, ANSYS, or similar tools, and the ability to check results by hand.
  • Manufacturing engineering experience, such as sequencing builds, writing work instructions, supporting the production floor, or dispositioning non‑conformances.
  • Experience supporting structural or mechanical testing.
  • Ability to work independently and make good decisions with incomplete information.
  • Must be a U.S. Person as defined by ITAR/EAR.

Mansioni

  • Create 3D CAD models and drawings for aircraft structure, including composites and metals.
  • Use hand calculations and FEA to check strength, stiffness, buckling, joints, and mass properties.
  • Define manufacturing sequences and write work instructions; oversee shop floor build.
  • Specify layup schedules, molds, fixtures, and bonding processes.
  • Review non-conformances and write repair instructions.
  • Plan and support coupon, component, and structural testing; support ground and flight tests.
  • Release drawings and bills of material; coordinate with vendors.
  • Work with systems and electrical teams to fit systems into the structure.

Conoscenze

Aerospace experience
Prototype development
3D CAD skills
Independent decision making
Testing planning

Formazione

Bachelor’s degree in mechanical or aerospace engineering

Strumenti

SolidWorks
CATIA
NX
Creo
NASTRAN
Abaqus/ANSYS

Descrizione del lavoro

Headquartered in Silicon Valley, California, Archer is a leader in the next-gen aerospace sector building an end-to-end advanced air mobility platform that delivers air taxis, unmanned aircraft systems(“UAS”), aviation-related physical artificial intelligence(“AI”) solutions, and other technologies to customers worldwide across the commercial aerospace and defense sectors.

Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.

About the RoleThis role covers the full life of a prototype aircraft structure: design, analysis, build, and test. You will design the parts, analyze them, work with the shop floor to build them, and help test them, then use what you learn to improve the next article. You will work in a small team where one engineer owns a structure from first concept through first flight hardware.

Core Responsibilities

  • Create 3D CAD models and drawings for aircraft structure, including composite and metallic parts, assemblies, brackets, mounts, and fairings. Design each part with its manufacturing method in mind from the start.
  • Use hand calculations and FEA to check strength, stiffness, buckling, joints, and mass properties against the expected loads. Document the results so other engineers can review them.
  • Define manufacturing sequences and priorities, write work instructions, and oversee the build on the production floor. Work directly with technicians to solve problems as they come up.
  • Specify layup schedules, molds, fixtures, and bonding and assembly processes, and make sure parts can be built repeatedly.
  • Review non-conformances found during the build, assess their impact on the structure, and write repair and rework instructions.
  • Plan and support coupon, component, and structural testing, and support ground and flight test. Compare test results with analysis, find the root cause of any discrepancy, and apply the lessons to the next design.
  • Release drawings and bills of material, manage revisions, coordinate with outside vendors on machining and fabrication, and keep schedule and cost in view.
  • Work with systems, electrical, propulsion, and flight test engineers to fit systems into the structure, including packaging, access, thermal paths, and weight and balance.

Required Qualifications

  • Bachelor’s degree in mechanical engineering, aerospace engineering, or a closely related field
  • 6+ years of hands‑on experience in aerospace or aviation
  • Experience on prototype, experimental, or first‑of‑a‑kind aircraft or flight vehicles
  • Experience across the full lifecycle of a structure: design, analysis, manufacturing, and test. Candidates must be able to describe work they personally did in each.
  • Hands‑on composite experience, including design, layup, tooling, and bonded or fastened joints
  • Proficiency in 3D CAD (SolidWorks, CATIA, NX, Creo, or similar) and in producing engineering drawings
  • Structural analysis experience with Nastran, Abaqus, ANSYS, or similar tools, and the ability to check results by hand
  • Manufacturing engineering experience, such as sequencing builds, writing work instructions, supporting the production floor, or dispositioning non‑conformances
  • Experience supporting structural or mechanical testing
  • Ability to work independently and make good decisions with incomplete information
  • Must be a U.S. Person as defined by ITAR/EAR (U.S. citizen, national, lawful permanent resident, asylee, or refugee)

Preferred Qualifications

  • GD&T knowledge and experience applying it to drawings
  • Experience designing test fixtures or structural test systems
  • Experience with filament winding, thermoplastics, or other advanced composite processes
  • Familiarity with PDM/PLM tools and engineering change processes
  • Ability to obtain and maintain a U.S. government security clearance

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay‑for‑performance culture and reward performance that supports the Company’s strategy. For this position, we are targeting a base pay range of $172,000 - $230,000. Actual compensation offered will be determined by job‑related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case‑by‑case basis.
Certain positions may be eligible for visa sponsorship.
Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.
Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Design Engineer, UAS Programs
Design Engineer, UAS Programs

Archer56 • San Jose (CA)

In loco
USD 172.000 - 230.000
Staff Design Engineer, Airframe
Staff Design Engineer, Airframe

Archer Technologies • San Jose (CA)

In loco
USD 173.000 - 216.000
Visa sponsorship
Equal opportunity employer
Staff Design Engineer, Airframe
Staff Design Engineer, Airframe

Archer • San Jose (CA)

In loco
USD 172.800 - 216.000
Director, Structures Engineering
Director, Structures Engineering

Archer Technologies International, Incorporated • San Jose (CA)

In loco
USD 249.000 - 311.000
Structures Architect — Conceptual Design
Structures Architect — Conceptual Design

Archer • San Jose (CA)

In loco
USD 153.000 - 228.000
Aircraft Architecture & Integration Engineer
Aircraft Architecture & Integration Engineer

Archer Technologies International, Incorporated • San Jose (CA)

In loco
USD 173.000 - 238.000
Aircraft Architecture & Integration Engineer
Aircraft Architecture & Integration Engineer

Archer • San Jose (CA)

In loco
USD 173.000 - 238.000
Structures Architect — Conceptual Design
Structures Architect — Conceptual Design

Archer Technologies International, Incorporated • San Jose (CA)

In loco
USD 153.000 - 228.000
Composite Technician
Composite Technician

Archer • Huntington Beach (CA)

In loco
USD 48.000 - 69.000
Staff Engineering Program Manager, UAS Programs
Staff Engineering Program Manager, UAS Programs

Archer Technologies • San Jose (CA)

In loco
USD 173.000 - 228.000