Design Engineer, UAS Programs

Archer56

San Jose (CA)

On-site

USD 172,000 - 230,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Archer Aviation in Silicon Valley is hiring a structural engineer to cover the full life cycle of prototype aircraft structures. You will design parts, analyze them, work with the shop floor to build, and help test, then use lessons to improve the next article.

You will collaborate with systems and flight test engineers to fit packaging, thermal paths, and weight balance into the structure, while ensuring manufacturability and quality.

Qualifications

  • Bachelor’s degree in mechanical engineering, aerospace engineering, or a closely related field
  • 6+ years of hands‑on experience in aerospace or aviation
  • Experience on prototype, experimental, or first‑of‑a‑kind aircraft or flight vehicles
  • Experience across the full lifecycle of a structure: design, analysis, manufacturing, and test
  • Hands‑on composite experience, including design, layup, tooling, and bonded or fastened joints
  • Proficiency in 3D CAD (SolidWorks, CATIA, NX, Creo, or similar) and in producing engineering drawings
  • Structural analysis experience with Nastran, Abaqus, ANSYS, or similar tools, and the ability to check results by hand
  • Manufacturing engineering experience, such as sequencing builds, writing work instructions, supporting the production floor, or dispositioning non‑conformances
  • Experience supporting structural or mechanical testing
  • Ability to work independently and make good decisions with incomplete information
  • Must be a U.S. Person as defined by ITAR/EAR (U.S. citizen, national, lawful permanent resident, asylee, or refugee)

Responsibilities

  • Create 3D CAD models and drawings for aircraft structure, including composites and metals
  • Use hand calculations and FEA to check strength, stiffness, buckling, joints, and mass properties
  • Define manufacturing sequences and write work instructions and oversee the build on the production floor
  • Specify layup schedules, molds, fixtures, and bonding and assembly processes
  • Review non-conformances and write repair and rework instructions
  • Plan and support coupon, component, and structural testing, and support ground and flight test
  • Release drawings and BOMs, manage revisions, coordinate with vendors on machining
  • Work with systems, electrical, propulsion, and flight test engineers to fit systems into the structure

Skills

3D CAD
SolidWorks
CATIA
Abaqus
Nastran
Engineering judgment
Independent work
U.S. Person per ITAR

Education

Bachelor's degree in mechanical/aerospace engineering

Tools

3D CAD tools
PDM/PLM

Job description

Headquartered in Silicon Valley, California, Archer is a leader in the next-gen aerospace sector building an end-to-end advanced air mobility platform that delivers air taxis, unmanned aircraft systems (“UAS”), aviation-related physical artificial intelligence (“AI”) solutions, and other technologies to customers worldwide across the commercial aerospace and defense sectors.

Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.

About the Role

This role covers the full life of a prototype aircraft structure: design, analysis, build, and test. You will design the parts, analyze them, work with the shop floor to build them, and help test them, then use what you learn to improve the next article. You will work in a small team where one engineer owns a structure from first concept through first flight hardware.

Core Responsibilities
  • Create 3D CAD models and drawings for aircraft structure, including composite and metallic parts, assemblies, brackets, mounts, and fairings. Design each part with its manufacturing method in mind from the start.
  • Use hand calculations and FEA to check strength, stiffness, buckling, joints, and mass properties against the expected loads. Document the results so other engineers can review them.
  • Define manufacturing sequences and priorities, write work instructions, and oversee the build on the production floor. Work directly with technicians to solve problems as they come up.
  • Specify layup schedules, molds, fixtures, and bonding and assembly processes, and make sure parts can be built repeatedly.
  • Review non-conformances found during the build, assess their impact on the structure, and write repair and rework instructions.
  • Plan and support coupon, component, and structural testing, and support ground and flight test. Compare test results with analysis, find the root cause of any discrepancy, and apply the lessons to the next design.
  • Release drawings and bills of material, manage revisions, coordinate with outside vendors on machining and fabrication, and keep schedule and cost in view.
  • Work with systems, electrical, propulsion, and flight test engineers to fit systems into the structure, including packaging, access, thermal paths, and weight and balance.
Required Qualifications
  • Bachelor’s degree in mechanical engineering, aerospace engineering, or a closely related field
  • 6+ years of hands‑on experience in aerospace or aviation
  • Experience on prototype, experimental, or first‑of‑a‑kind aircraft or flight vehicles
  • Experience across the full lifecycle of a structure: design, analysis, manufacturing, and test. Candidates must be able to describe work they personally did in each.
  • Hands‑on composite experience, including design, layup, tooling, and bonded or fastened joints
  • Proficiency in 3D CAD (SolidWorks, CATIA, NX, Creo, or similar) and in producing engineering drawings
  • Structural analysis experience with Nastran, Abaqus, ANSYS, or similar tools, and the ability to check results by hand
  • Manufacturing engineering experience, such as sequencing builds, writing work instructions, supporting the production floor, or dispositioning non‑conformances
  • Experience supporting structural or mechanical testing
  • Ability to work independently and make good decisions with incomplete information
  • Must be a U.S. Person as defined by ITAR/EAR (U.S. citizen, national, lawful permanent resident, asylee, or refugee)
Preferred Qualifications
  • GD&T knowledge and experience applying it to drawings
  • Experience designing test fixtures or structural test systems
  • Experience with filament winding, thermoplastics, or other advanced composite processes
  • Familiarity with PDM/PLM tools and engineering change processes
  • Ability to obtain and maintain a U.S. government security clearance

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s strategy. For this position, we are targeting a base pay range of $172,000 - $230,000. Actual compensation offered will be determined by job‑related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com . Reasonable accommodations will be determined on a case‑by‑case basis.

Information collected and processed as part of any job applications you choose to submit is subject to Archer's Candidate Privacy Policy .

Certain positions may be eligible for visa sponsorship.

Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.

Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to People@archer.com . All employment processes are managed by the Archer People Team.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Design Engineer, UAS Programs
Design Engineer, UAS Programs

Archer Technologies • San Jose (CA)

On-site
USD 172,000 - 230,000
Visa sponsorship
Reasonable accommodations
Equal Opportunity employer
Staff Design Engineer, Airframe
Staff Design Engineer, Airframe

Archer Technologies • San Jose (CA)

On-site
USD 173,000 - 216,000
Visa sponsorship
Equal opportunity employer
Staff Design Engineer, Airframe
Staff Design Engineer, Airframe

Archer • San Jose (CA)

On-site
USD 172,800 - 216,000
Aircraft Architecture & Integration Engineer
Aircraft Architecture & Integration Engineer

Archer Technologies International, Incorporated • San Jose (CA)

On-site
USD 173,000 - 238,000
Structures Architect — Conceptual Design
Structures Architect — Conceptual Design

Archer • San Jose (CA)

On-site
USD 153,000 - 228,000
Composite Technician
Composite Technician

Archer • Huntington Beach (CA)

On-site
USD 48,000 - 69,000
Director, Structures Engineering
Director, Structures Engineering

Archer Technologies International, Incorporated • San Jose (CA)

On-site
USD 249,000 - 311,000
Structures Architect — Conceptual Design
Structures Architect — Conceptual Design

Archer Technologies International, Incorporated • San Jose (CA)

On-site
USD 153,000 - 228,000
Aircraft Architecture & Integration Engineer
Aircraft Architecture & Integration Engineer

Archer • San Jose (CA)

On-site
USD 173,000 - 238,000
Mechanical Design Engineer - Thermal and Ducting
Mechanical Design Engineer - Thermal and Ducting

Archer • San Jose (CA)

On-site
USD 144,000 - 198,000