Design Engineer II

RNWBL

Mukwonago (WI)

On-site

USD 70,000 - 100,000

Full time

9 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Competitive compensation
Medical, dental, and vision insurance
401(k) with employer match
Paid holidays and vacation time
Career Growth Opportunities in Wind,  
EAP

Job summary

RNWBL is seeking a qualified Engineer to join the gearbox design team in Mukwonago, WI. This role emphasizes collaboration with lead technicians on upgrade designs and troubleshooting, both in shop and office environments.

You will co-own the First Time Disassembly process, create BOMs, develop CAD models, and lead gear and bearing analyses. A BS in engineering and 2–4 years CAD/PDM experience (SolidWorks) are required, with GD&T exposure highly valued.

Qualifications

  • Bachelor of Science in relevant engineering discipline.
  • 2-4 years of experience in relevant field. Additional consideration given to experiences with gearboxes or gearing.
  • 2-4 years of experience using CAD and PDM Software. Additional consideration given to SolidWorks experience. Special consideration will be given to applicants with GD&T experience.
  • Accomplished analytic, written, verbal and interpersonal skills.
  • Demonstrated problem solving and decision making abilities required.
  • High attention to detail and accuracy.
  • Positive attitude and strong work ethic.
  • Ability to be highly “Customer Conscious”.
  • Focused on Quality and details.
  • Desire for constant challenge.
  • Ability to adapt to change.

Responsibilities

  • Co-own First Time Disassembly process with Senior Production Engineer.
  • Perform First Time Disassembly and take required photos when requested by the Senior Production Engineer.
  • Assist with initial Bill of Material creation.
  • Assist with assigning part numbers to BOM.
  • Enter part numbers and create new routing in Sage 500 system as required.
  • Lead reverse engineering activities.
  • Develop BOM for those models.
  • Lead Engineering Department with gear and bearing analysis.
  • Create CAD models of parts and sub-assemblies for each gearbox model.
  • Review and analyze dimension and material specification.
  • Create templates for production and quality paperwork.
  • Design upgrades for bearings, anti-rotation measures, lubrication, sealing, and misc. fits in gearboxes as needed.
  • Work closely with disassembly on each type of gearbox model.
  • Use this information to update the BOM for each model to make them fully accurate.
  • Create CAD models of parts and sub-assemblies for each gearbox model.
  • Use those models to create a full assembly model and sectional drawing for each gearbox.
  • Create drawings and check sheets for rework and new manufacture.
  • Design upgrades for bearings, anti-rotation measures, lubrication, sealing, and misc. fits in gearboxes as needed.
  • Review Drawings and designs created by Design Engineer I and related positions.
  • Assist with training new hires, particularly in the Design Engineer I position
  • Become the team expert in certain aspects of Gearbox design, function, or operation to assist production and address design concerns
  • Learn common failure modes and characteristics.
  • Design upgrades that mitigate common failures in refurbished gearboxes.
  • Assist with model specific work instruction development.
  • Design / develop special tooling required for disassembly and assembly to assist with process upgrades.
  • Troubleshoot with technicians on tear down / build issues and assist with solutions.
  • Design / develop special rework plans for recovering specially damaged gearbox cores.
  • Sage processes including item creation and tracking methods in the system.
  • Interface with Purchasing to provide technical information required for quotes.
  • Attend training classes (SolidWorks, Gear/Bearing design or Failure related seminars, etc.) to stay up to date, bring knowledge back to help train the rest of the engineering team so the group stays efficient.
  • Support GBX School on as needed basis.

Skills

CAD experience
GD&T experience
Analytical skills
Problem solving
Interpersonal skills
Attention to detail
Customer focus
Team collaboration
Continuous learning

Education

Bachelor of Science in Engineering

Tools

SolidWorks
CAD software
PDM software

Job description

About Us

At RNWBL, we know that our greatest strength lies in our people. We hire individuals who are driven by purpose and a commitment to excellence. Our team is dedicated to delivering superior service and ensuring client satisfaction at every step. Supporting some of the largest and most reputable companies in the industry, we are committed to pushing the boundaries of what's possible, providing innovative, safe, and cutting-edge solutions that set new industry standards. Power Your Purpose. Join Our Team.

About the role

This position will report directly to the Engineering Manager. This position should be viewed not as a “Job” but rather as a “Career Commitment”. This means “wearing many hats” beyond the scope of primary responsibilities. Of particular importance is your ability to work with lead techs on upgrade designs and troubleshooting of potential issues both in the shop and office environments.

Duties
  • Co-own First Time Disassembly process with Senior Production Engineer
  • Perform First Time Disassembly and take required photos when requested by the Senior Production Engineer.
  • Assist with initial Bill of Material creation
  • Assist with assigning part numbers to BOM
  • Enter part numbers and create new routing in Sage 500 system as required
  • Lead reverse engineering activities.
  • Develop BOM for those models.
  • Lead Engineering Department with gear and bearing analysis.
  • Create CAD models of parts and sub-assemblies for each gearbox model.
  • Review and analyze dimension and material specification.
  • Create templates for production and quality paperwork.
  • Design upgrades for bearings, anti-rotation measures, lubrication, sealing, and misc. fits in gearboxes as needed.
  • Work closely with disassembly on each type of gearbox model.
  • Use this information to update the BOM for each model to make them fully accurate.
  • Create CAD models of parts and sub-assemblies for each gearbox model.
  • Use those models to create a full assembly model and sectional drawing for each gearbox.
  • Create drawings and check sheets for rework and new manufacture.
  • Design upgrades for bearings, anti-rotation measures, lubrication, sealing, and misc. fits in gearboxes as needed.
  • Review Drawings and designs created by Design Engineer I and related positions.
  • Assist with training new hires, particularly in the Design Engineer I position
  • Become the team expert in certain aspects of Gearbox design, function, or operation to assist production and address design concerns
  • Learn common failure modes and characteristics.
  • Design upgrades that mitigate common failures in refurbished gearboxes.
Lead Operational projects
  • Assist with model specific work instruction development.
  • Design / develop special tooling required for disassembly and assembly to assist with process upgrades.
  • Troubleshoot with technicians on tear down / build issues and assist with solutions.
  • Design / develop special rework plans for recovering specially damaged gearbox cores.
Lead Special projects for Office when needed
  • Sage processes including item creation and tracking methods in the system.
  • Interface with Purchasing to provide technical information required for quotes.
  • Attend training classes (SolidWorks, Gear/Bearing design or Failure related seminars, etc.) to stay up to date, bring knowledge back to help train the rest of the engineering team so the group stays efficient.
  • Support GBX School on as needed basis.
Qualifications
  • Bachelor of Science in relevant engineering discipline
  • 2-4 years of experience in relevant field. Additional consideration given to experiences with gearboxes or gearing
  • 2-4 years of experience using CAD and PDM Software. Additional consideration given to SolidWorks experience. Special consideration will be given to applicants with GD&T experience.
  • Accomplished analytic, written, verbal and interpersonal skills.
  • Demonstrated problem solving and decision making abilities required.
  • High attention to detail and accuracy.
  • Positive attitude and strong work ethic.
  • Ability to be highly “Customer Conscious”.
  • Focused on Quality and details.
  • Desire for constant challenge.
  • Ability to adapt to change
This is a 1st shift schedule.
Hours are Monday-Friday 7am-4pm.
  • Competitive compensation
  • Medical, dental, and vision insurance
  • 401(k) with employer match
  • Paid holidays and vacation time
  • Career Growth Opportunities within Wind, Solar, and BESS sectors
  • Employee Assistance Program (EAP)
  • Continuous Professional Development Support
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Gearbox Engineering Manager
Gearbox Engineering Manager

Sumitomo Drive Technologies USA • Verona (VA)

On-site
USD 106,000 - 133,000
Life and Disability Insurance (Company
401K with Matching
LinkedIn Learning
+1
Aftermarket Design Engineer
Aftermarket Design Engineer

Sumitomo Drive Technologies USA • Lufkin (TX)

On-site
USD 75,000 - 94,000
Medical, Dental, Vision
Paid time off including volunteer work
Company-paid life and AD&D insurance
+4
Gearbox Engineering Manager
Gearbox Engineering Manager

Sumitomo Drive Technologies • Verona (VA)

On-site
USD 106,000 - 133,000
Medical, Dental, Vision
Paid Time Off- Including Volunteer Hor
Life and Accidental Death Insurance (2
+4
Gearbox Design Engineer II - CAD, Analysis, Growth
Gearbox Design Engineer II - CAD, Analysis, Growth

RNWBL • Mukwonago (WI)

On-site
USD 70,000 - 100,000
Competitive compensation
Medical, dental, and vision insurance
401(k) with employer match
+3
Mechanical Engineer
Mechanical Engineer

American Gear Manufacturers Association • Westland (MI)

On-site
USD 85,000 - 110,000
Mechanical Engineer
Mechanical Engineer

B&D Industrial Enterprises, Inc. • Westland (MI)

On-site
USD 80,000 - 110,000
Aftermarket Design Engineer
Aftermarket Design Engineer

Sumitomo Group • Lufkin (TX)

On-site
USD 75,000 - 94,000
Life Insurance
Disability Insurance
401K with match
+2
Gearbox Engineering Manager
Gearbox Engineering Manager

Sumitomo Group • Verona (VA)

On-site
USD 106,000 - 133,000
Life and Accidental Death Insurance (&
Short and Long Term Disability
401K, 401K Match- Access to Certified
+2
Workshop Manager – Gearboxes
Workshop Manager – Gearboxes

Premier Global Links • Ponchatoula (LA)

On-site
USD 80,000 - 110,000
Mechanical Designer (Gearbox Designer)
Mechanical Designer (Gearbox Designer)

Tribonet • United States

On-site
USD 120,000 - 170,000