Crash Simulation Engineer

Recaro Aircraft Seating Americas, Inc.; Fort Worth (TX); On-site; USD 90,000 - 130,000; Full time

Job summary

Recaro Aircraft Seating Americas, Inc. seeks a Design Validation Engineer II (Crash Simulation) to independently execute structural and crashworthiness validation for aircraft seating systems.

You will drive modeling, worst-case load scenarios, and certification substantiation through advanced FEA and physical test correlation. Qualifications include a BS (MS preferred) in aerospace/mechanical engineering and 4+ years in aircraft interiors, with expertise in LS-DYNA, ANSYS, ANSA, and CATIA.

Qualifications

• BS or MS in aerospace/mechanical engineering or related field.
• 4+ years experience in aircraft interior products or similar
• Hands-on FEA experience with LS-DYNA and ANSYS
• Experience with CATIA and certification processes preferred
• Strong communication and teamwork capabilities

Responsibilities

• Execute structural validation to meet FAA and customer requirements.
• Perform linear/nonlinear static analysis and crash simulations.
• Develop and maintain FE models with proper boundary conditions.
• Correlate analytical results with test data for certification substantiation
• Review drawings, MRB, and test plans to ensure compliance

Skills

Org. skills

Deadline awareness

Detail-oriented

Independent learner

Teamwork

Communication skills

Ethical judgement

Education

B.S. in Aerospace/Mechanical Eng

M.S. in Aerospace/Mechanical Eng (preferred)

Tools

ANSYS

LS-DYNA

ANSA

CATIA V4/V5

Job description

About this position

Description:

Position Summary: The Design Validation Engineer II "Crash Simulation Engineer" is responsible for independently executing structural and crashworthiness validation activities for aircraft seating systems. This role provides specialized technical expertise to demonstrate compliance with FAA, airframer, airline, and internal structural requirements through advanced numerical analysis, classical engineering methods, and correlation with physical test evidence.

The position plays a critical role in certification programs and new product development by owning analysis models, evaluating worst-case loading conditions, and driving design robustness through predictive simulations and data-driven engineering judgment.

Essential Duties and Responsibilities include the following, other duties may be assigned:

• Execute structural design validation for aircraft seating systems to demonstrate compliance with FAA, airframer, airline, and internal requirements using classical analytical methods, advanced finite element analysis (FEA), and supporting physical test evidence.
• Perform linear and non-linear static analysis and dynamic crash simulations (e.g., 14G / 16G conditions) using LS-DYNA and equivalent solvers to assess structural integrity, occupant safety, and certification compliance.
• Develop, own, and maintain finite element models by defining appropriate boundary conditions, material properties, load cases, and modeling techniques to realistically represent certification and operational scenarios.
• Analyze and correlate physical test results with analytical models to validate assumptions, establish confidence in simulation accuracy, and support certification substantiation.
• Provide technical guidance to certification programs through assessment of critical load cases, test configurations, and worst-case structural conditions in accordance with regulatory and customer requirements.
• Drive structural design improvements by evaluating load paths, margins of safety, failure modes, and robustness across multiple configuration variants.
• Collaborate with design engineering teams on development of new components and seat architectures by providing predictive analysis input and validation feedback to influence early design decisions.
• Review and assess engineering drawings, MRB dispositions, concessions, and design deviations by performing structural impact assessments to ensure continued compliance with certification and structural integrity requirements.
• Review and witness component qualification, certification, and abuse load tests by evaluating test plans, setups, and acceptance criteria.
• Author and review technical analysis summaries and engineering substantiation documentation to support certification findings and internal technical reviews.

Requirements

Education/Experience

• A minimum of Four-year B.S. degree is required preferably in Aerospace / Mechanical / other engineering with at least 4 years’ experience in aircraft interior products or a Master's degree preferably in Aerospace or Mechanical engineering with at least 2 years’ experience in aircraft interior products.

Technical Skills and Experience Requirements

• Organizational skills, self-motivation, a sense of urgency and sensitivity to deadlines, and detail-oriented style are required.
• Evidence of ability to hand calculate generating reserve factors, at limit and ultimate load conditions using classical methods or methods described by Tom Rhodes.
• Ability to learn independently
• At minimum of 2 years of Finite element analysis experience is needed
• At a minimum 1 year experience in ANSA or similar software and LS-Dyna software is required.
• Knowledge of Ansys software is desired.
• Experience in CATIA V4 or V5 or a similar program desired.
• Experience in Certification is a plus.
• Internship experience is preferred, but not required.
• Good verbal and written communication skills are required.
• The ability to work as part of a team in conjunction with more and or less experienced people.
• Strong ethical persuasion to seek out the truth in a technical situation.
• The wisdom to deal with technical challenges with tack and professionalism