Controls Technician - programming and building PLC panels

Management Performance Associates

Newnan (GA)

On-site

USD 34,000 - 55,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

401(k) with company match
Overtime pay 1.5x
Competitive hourly rate

Job summary

Management Performance Associates seeks a seasoned Controls Technician for the day shift in the SW Atlanta area. You will design and integrate control systems for automated equipment, assemble PLC panels, and program them to run, while supporting testing, commissioning, and ongoing maintenance.

The role includes hands-on wiring, troubleshooting, and safety circuit integration. You will work with engineers and production teams to meet output targets, perform preventative maintenance, and train

Qualifications

  • Minimum of 6 years related experience in controls or automation.
  • Strong PLC programming skills with ability to read PLC code from prints/schematics.
  • Experience wiring 9-lead motors and stress testing windings.
  • Familiarity with sensors (PNP/NPN, loop-powered, dry contact) and analog signals (4-20mA, 0-10V).
  • Able to identify critical information from motor data plates for component specing.

Responsibilities

  • Install air logic controls from prints or schematics for pneumatics.
  • Troubleshoot hydraulic circuits with valves, accumulators, cylinders, and flow controls.
  • Troubleshoot PLC systems using computer and control software.
  • Install, program, or repair programmable controllers and robot controllers.
  • Build and wired control panels; maintain and service automated equipment.
  • Disassemble/reassemble equipment to repair or replace defective parts.
  • Train others to install, use, and service equipment.
  • Collaborate with engineers and production teams to optimize output and performance.

Skills

PLC programming
Ladder logic
Panel building
Electrical experience
Robotics
Safety circuits
Motor winding testing
Motor data plate interpretation

Job description

GENERAL SUMMARY:

Major and established company with a huge majority market share in what they manufacture and a good working culture has an opportunity on the day shift which is 7:00am - 3:30pm Monday thru Friday for a Controls Technician in the southwest suburban Atlanta area. The Controls Technician will participate in cell design, along with the integration of controls and installation of automated equipment. Will build PLC panels and then program them as well as get them up and running. The technician is responsible for assisting in configuring, testing, operating, maintaining, servicing, and troubleshooting controls, as well as other automated systems used in production. Some of the responsibilities of the role detailed below:

1. Pneumatics: Install air logic controls from prints or schematics.

2. Hydraulic: Troubleshoot hydraulic circuits containing the following components, check valves, accumulators, cylinders, flow controls, directional control valves, pressure control valves.

3. Troubleshoot PLC systems using computer.

4. Install, program, or repair programmable controllers, and robot controllers.

5. Use knowledge of all fabrication equipment to complete maintenance tasks.

  1. Operating the equipment or overseeing the operation of equipment.
  2. Analyzing and categorizing events within the equipment.
  3. Working closely with engineers and production team to help achieve a desired output.
  4. Conducting preventative maintenance, such as routine upgrades and inspections.
  5. Repairing machine controls, systems, and tools as needed.
  6. Disassembling (or re-assembling) equipment to repair or replace defective parts.
  7. Training others to install, use, and service equipment.

The location is southwest suburban Atlanta, GA. There is an attractive hourly rate. OT is paid at time and 1/2. There are major company benefits and an attractive 401K with matching.

Needed experience:
  • desire at least 6 years of related experience
  • PLC programming with confidence in using context clues within the PLC program
  • comfortable with programming a machine process from scratch
  • comfortable with wiring a 9-lead motor, and stress testing the motor's windings
  • able to identify critical info. from a motors data plate and use the info for specing-out or programming new control components such as contactors, soft starters, and VFDs
  • familiarity with sensors: PNP, NPN, loop-powered, and dry contact
  • analog control familiarity: signal ranges of 4-20mA and 0-10 volts
  • ladder logic troubleshooting
  • panel building
  • electrical experience
  • some robotic experience
  • safety circuit integration
  • must be authorized to work indefinitely in the USA without sponsorship
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

The Recruiting Hive • Newnan (GA)

On-site
USD 39,000 - 52,000
401K with matching
Benefits package
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

ASHFORD CONNEX, LLC • Newnan (GA)

On-site
USD 34,000 - 55,000
401K with company match
Attractive benefits
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Essenti Talent • Newnan (GA)

On-site
USD 39,000 - 55,000
Competitive hourly rate
Overtime pay (time and a half)
401K with matching
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

RRC Solutions Group • Newnan (GA)

On-site
USD 34,000 - 52,000
OT paid at 1.5x
401K with company match
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Professional Recruiting Consultants, Inc. • Newnan (GA)

On-site
USD 34,000 - 55,000
401K with matching
Benefits package
OT at time and a half
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Ridgemont Resources, Inc. • Newnan (GA)

On-site
USD 30,000 - 47,000
Overtime paid at time and a half
401K with company match
Competitive hourly rate with full ben­
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Barrette Workforce Solutions, LLC • Newnan (GA)

On-site
USD 34,000 - 55,000
401K with matching
Benefits package
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Talent Solutions Partners • Newnan (GA)

On-site
USD 39,000 - 52,000
401K with matching
OT pay 1.5x
Major company benefits
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

United Future • Newnan (GA)

On-site
USD 34,000 - 55,000
Benefits
401K with matching
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Calqulate Metrics Ltd • Newnan (GA)

On-site
USD 39,000 - 58,000
Competitive hourly rate
OT 1.5x
401K with matching
+1