Controls Engineer, R&D

Fluidstack

United States

On-site

USD 120,000 - 170,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Fluidstack seeks a controls engineer for its Thermofluids R&D team in the United States. You will own the machine control architecture and test rigs, write safety interlocks, and drive capacity control via motor and turbine speed while avoiding valve throttling at the design point.

You will validate systems with hardware-in-the-loop testing and ensure interlocks fire before production. Expertise in rotating machinery control and model-based tools is required.

Qualifications

  • You've written control logic for rotating machinery and you were in the room the first time it ran.
  • You've designed interlocks where a fault means destroyed hardware or an injured person, and you can justify every one of them from first principles.
  • You've run hardware-in-the-loop testing that caught something real before it reached commissioning.
  • You've tuned loops on a live machine and worked out why the model and the plant disagreed.
  • You've handed a control system to people who did not write it, with documentation they could actually use at three in the morning.

Responsibilities

  • Own the control architecture for the machine and the test rigs, spanning the compressor, the motor drive, the expansion turbine and the loop around them.
  • Write the safety interlocks and fault handling for a machine whose working fluid can cross its critical point inside the normal operating range, taking the control problem with it.
  • Deliver capacity control through motor and turbine speed rather than throttling valves, keeping the process fluid path free of valves at the design point.
  • Validate the control system against hardware-in-the-loop before it ever touches the real machine, and prove the interlocks fire.
  • Carry the controls out of the test cell and into the production chiller, including integration with site BMS and the wider plant.

Skills

Control logic for rotating machinery
Interlock design
Hardware-in-the-loop testing
Loop tuning on live machines

Tools

Beckhoff
Siemens
Allen-Bradley
CODESYS
Simulink
dSPACE
NI VeriStand

Job description

About Fluidstack

We exist to make humanity more free. For most of human history, you farmed or you starved. Technology gave people more time for the things they wanted to do, instead of things they had to do. Powerful AI will be the biggest lever for human choice we've ever built - but only if models are aligned with what humanity actually wants. There are groups building AI who don't share these goals. Whoever deploys frontier compute infrastructure fastest will decide whether AI expands human freedom or shrinks it.

We're singularly focused on delivering 10 to 100s of GWs of compute faster than anyone else, rethinking every layer of the stack. We acquire power, design and build data centers, and operate them - with teams spanning hardware and software. Speed and scale are our key differentiators. Come be a part of building civilization-scale infrastructure for AI.

We hire people who care deeply about this problem space.

How We Operate
  • Be a barrel. Full autonomy. Own things end to end, take on scope without being asked, no permission required to operate outside your core role.
  • Insane urgency. We drive everything forward as fast as possible.
  • Reason from first principles. Challenge every assumption. Zero analogy thinking, no egos, the best idea wins.
  • Love of the game. The frontier of AI is the most interesting problem of our time. We put in long hours at high intensity to push the frontier forward.
  • Build something that actually matters. If you're going to spend your time, spend it on something that matters to the world.
The Thermofluids R&D Team

Examples of key problems the team is working on

  • Reject 10s of GW of heat, starting now. Fluidstack is targeting 10s of GW of compute over the next two years. Every watt of it becomes heat that has to go somewhere, and no cooling team has ever been asked to open at that scale rather than grow into it.
  • Design and build the machines, because nobody can supply them. The merchant compressor market cannot deliver at this rate, and the vendor base behind today's chillers will not scale to gigawatts. We are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible.
  • Own every thermofluids problem behind the fleet, not just the chiller. Working fluid and cycle architecture, heat exchangers at a scale that dominates the cost of the plant, two-phase heat transfer at the chip, and thermal energy storage. All of it is open, and whatever this team lands gets built thousands of times.
Role Scope
  • Own the control architecture for the machine and the test rigs, spanning the compressor, the motor drive, the expansion turbine and the loop around them.
  • Write the safety interlocks and fault handling for a machine whose working fluid can cross its critical point inside the normal operating range, taking the control problem with it.
  • Deliver capacity control through motor and turbine speed rather than throttling valves, keeping the process fluid path free of valves at the design point.
  • Validate the control system against hardware-in-the-loop before it ever touches the real machine, and prove the interlocks fire.
  • Carry the controls out of the test cell and into the production chiller, including integration with site BMS and the wider plant.
What We're Looking For

The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would .

  • You've written control logic for rotating machinery and you were in the room the first time it ran.
  • You've designed interlocks where a fault means destroyed hardware or an injured person, and you can justify every one of them from first principles.
  • You've run hardware-in-the-loop testing that caught something real before it reached commissioning.
  • You've tuned loops on a live machine and worked out why the model and the plant disagreed.
  • You've handed a control system to people who did not write it, with documentation they could actually use at three in the morning.

Bonus:

  • Propulsion or vehicle test controls (engine sequencing, abort and safing logic).
  • Variable-speed drives and high-speed motor control (VFDs, magnetic bearing controllers).
  • Refrigeration and chiller control (superheat, head pressure, capacity staging).
  • Industrial control platforms (Beckhoff, Siemens, Allen-Bradley, CODESYS).
  • Model-based development and HIL (Simulink, dSPACE, NI VeriStand).

We are committed to pay equity and transparency.

Fluidstack is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law.

Fluidstack will consider for employment qualified applicants with arrest and conviction records pursuant to applica

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Controls Engineer, R&D
Controls Engineer, R&D

Fluidstack • Austin (TX)

On-site
USD 120,000 - 180,000
Controls Engineer, Thermofluids
Controls Engineer, Thermofluids

Fluidstack • Austin (TX)

On-site
USD 140,000 - 190,000
Controls Engineer, R&D
Controls Engineer, R&D

Fluidstack • Los Angeles (CA)

On-site
USD 210,000 - 260,000
Controls Engineer, R&D
Controls Engineer, R&D

Fluidstack • Seattle (WA)

On-site
USD 210,000 - 260,000
Thermofluids Controls Engineer: High-Scale Cooling
Thermofluids Controls Engineer: High-Scale Cooling

Fluidstack • Austin (TX)

On-site
USD 140,000 - 190,000
Power Electronics Engineer, R&D
Power Electronics Engineer, R&D

Fluidstack • United States

On-site
USD 140,000 - 200,000
Structural Engineer, R&D
Structural Engineer, R&D

Fluidstack • Austin (TX)

Hybrid
USD 120,000 - 180,000
Test Engineer, R&D
Test Engineer, R&D

Fluidstack • Austin (TX)

On-site
USD 120,000 - 170,000
Senior Power Electronics Engineer, Thermofluids
Senior Power Electronics Engineer, Thermofluids

Fluidstack • Austin (TX)

Hybrid
USD 120,000 - 180,000
Hybrid work model
Structural Engineer, Thermofluids
Structural Engineer, Thermofluids

Fluidstack • Austin (TX)

On-site
USD 120,000 - 160,000