Control Technician Class C, B, or A - Local 2357

FirstEnergy; Fairmont (WV); On-site; USD 70,000 - 95,000; Full time

Benefits offered by this job

401(k) plan

Pension plan

Medical, dental, vision, life insure.

Tuition reimbursement

Job summary

FirstEnergy Corp. seeks a Protection and Controls Technician for Mon Power to support installation, maintenance, testing, and troubleshooting of protective relays, control systems, and SCADA across Substations and transmission/distribution networks.

You will work with engineers and operators, performing high-voltage work, maintaining CIP compliance and storm restoration duties in the Mon Power territory. Strong troubleshooting and travel readiness are required.

Qualifications

• Electrical Engineering degree or equivalent combinations of education, technical training and experience.
• EEI Technician Occupations Selection System (TECH) test is required.
• Valid motor vehicle operator’s license and safe driving practices.
• Ability to safely perform electrical troubleshooting tasks.
• Ability to read and interpret control prints, wiring diagrams, and relay schematics.
• Ability to navigate and update information in various database programs.
• Proficiency with Microsoft Office applications.
• Able to lift up to 50 pounds.
• Willingness to travel within Mon Power territory, including overnight stays.
• Ability to prepare reports and technical data.
• Follow established procedures and standards.
• Must reside within 40 minutes of the Virginia Avenue Service Center in Fairmont, WV.

Responsibilities

• Actively support and promote safety policies and safe-work practices.
• Perform onsite work at Mon Power substations to maintain, troubleshoot, and install protection and control equipment.
• Install, test, calibrate, maintain, modify, and repair microprocessor-based and electromechanical relays (GE, SEL) and control systems.
• Calibrate differential, line protection, and reclosing schemes using Enoserv RTS and Doble ProTest.
• Install and maintain Substation Integration and SCADA systems for reliable data delivery.
• Install, test and maintain communications systems for telemetry and metering.
• Investigate mis-operations and assist in corrective actions.
• Perform high-voltage switching (12 kV to 765 kV).
• Maintain reliability standards and comply with FERC, NERC, PJM, RFC.
• Install and maintain CIP equipment and complete CIP training.
• Participate in storm restoration duties within the service territory.
• Collaborate with team members, internal customers and contractors.
• Construct, modify, troubleshoot and repair electronics under supervision.
• Prepare procedures for energizing new or revised equipment.
• Test and calibrate system components (CTs, PTs, relays, breakers).
• Review and update control drawings and field updates.

Skills

Electrical troubleshooting

Driver's license

Reading schematics

Microsoft Office

Database navigation

High-voltage switching

Education

Electrical Engineering degree

EEI TECH test

Proximity to Fairmont WV

Valid driver's license

Tools

GE protection relays

SEL protection relays

Enoserv RTS

Doble ProTest

SCADA systems

Job description

About The Opportunity

This is an open position with Mon Power, a subsidiary of FirstEnergy Corp. [MP]

Job Description

The MonPower Protection and Controls Technician plays a critical role in ensuring the safe, reliable, and efficient operation of the electric transmission and distribution system. Technicians in this role support the installation, maintenance, testing, and troubleshooting of protective relays, control systems, communications equipment, and substation automation technology throughout the Mon Power service territory.

This position offers a hands-on, technically challenging work environment where employees directly contribute to the reliability of the power grid. Protection and Controls Technicians collaborate closely with engineers, relay specialists, substation personnel, and system operators to ensure proper operation of complex protection schemes and critical infrastructure systems.

Responsibilities — Class C

• Actively support and promote the FirstEnergy Safety Philosophy by adhering to all safety policies, procedures, and safe-work practices.
• Perform onsite work at Mon Power substations and power stations to maintain, troubleshoot, and install protection and control equipment.
• Under direct supervision, install, test, calibrate, maintain, modify, and repair microprocessor-based and electromechanical protective relays (GE, SEL) and associated control systems.
• Utilize Enoserv RTS and Doble ProTest software to calibrate and function-test differential, line protection, and reclosing schemes.
• Install, test, modify, and maintain Substation Integration and SCADA systems to ensure reliable data delivery to FE System Operators and independent system operators.
• Install, test, calibrate, maintain, modify, and repair communications systems supporting telemetering, metering, load regulation, digital fault recording, and other essential data functions.
• Investigate and document equipment and line mis-operations; identify out-of-tolerance or unrepairable equipment and assist in corrective actions.
• Perform high-voltage switching operations (12 kV to 765 kV) in support of installation, maintenance, and modification of control equipment.
• Maintain system reliability standards and ensure compliance with FERC, NERC, PJM, and RFC requirements.
• Install, modify, and maintain Critical Infrastructure Protection (CIP) equipment, facilities, and networks while meeting all required CIP training.
• Participate in storm restoration duties within and outside the Mon Power service territory.
• Work collaboratively with team members, internal customers, and contractors to support safe and efficient operations.
• Construct, modify, troubleshoot, and repair various types of electronic equipment under direct supervision.
• Assist in preparing written procedures for coordinating equipment additions or modifications and energizing new or revised substation equipment (non-EHV).
• Test and calibrate system components, including current transformers, potential transformers, coupling capacitors, relays, and breakers.
• Review and verify accuracy of control drawings, performing field updates as required.

Responsibilities — Class B

• Performs all Class C responsibilities under general supervision, demonstrating increased technical independence, proficiency, and the ability to manage moderately complex assignments.

Responsibilities — Class A

• Performs all Class C responsibilities independently, demonstrating advanced technical competency, sound judgment, and full ownership of complex and critical work activities.

Qualifications — Class C

• Electrical Engineering, Associate or Bachelor’s degree in Electrical Engineering Technology, or Equivalent combinations of education, technical training, and relevant field experience will be considered.
• Successful completion of the EEI Technician Occupations Selection System (TECH) test.
• Valid motor vehicle operator’s license with adherence to all traffic laws and defensive driving practices.
• Demonstrated ability to safely perform electrical troubleshooting tasks.
• Ability to learn and apply troubleshooting techniques and communicate findings clearly.
• Ability to read and interpret control prints, wiring diagrams, and relay schematics.
• Ability to navigate and update information within various database programs.
• Proficiency with Microsoft Office applications.
• Ability to lift up to 50 pounds of equipment or materials.
• Willingness to travel within the Mon Power service territory, including overnight stays and extended work hours as required.
• Ability to conduct basic research, prepare reports, and compile technical data.
• Ability to follow established procedures, guidelines, and technical standards.
• Must reside within 40 minutes of the Virginia Avenue Service Center in Fairmont, WV.

Qualifications — Class B

• Includes all Class C qualifications plus:
• 3-5 years of experience as a Class B-equivalent Controls Technician.
• Ability to perform moderately complex assignments with limited supervision.
• Demonstrated understanding of technical and business processes.
• Intermediate-level troubleshooting proficiency.

Qualifications — Class A

• Includes all Class B and Class C qualifications plus:
• Minimum of 5 years of experience as a Class A-equivalent Controls Technician.
• Ability to independently complete complex assignments.
• Demonstrated leadership and mentorship capability.
• Proven ownership of complex operational issues from identification through resolution.
• Advanced troubleshooting and analytical skills.

Benefits, Compensation & Workforce Diversity

At FirstEnergy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401 (k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement. Please visit our website at www.firstenergycorp.com to learn more about all of our employee rewards programs. FirstEnergy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. Unable to sponsor or transfer H-1 B visas at this time.

Safety

Safety is a core value for FirstEnergy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident‑free, injury‑free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world‑class safety standards.

FirstEnergy Human Resources Team